Various Lexmark products have a Buffer Overflow (issue 2 of 3).
cgi-bin/postpf/cgi-bin/dynamic/config/config.html on Lexmark X94x before LC.BR.P142, X85x through LC4.BE.P487, X644 and X646 before LC2.MC.P374, X642 through LC2.MB.P318, W840 through LS.HA.P252, T64x before LS.ST.P344, X64xef through LC2.TI.P325, C935dn through LC.JO.P091, C920 through LS.TA.P152, C78x through LC.IO.P187, X78x through LC2.IO.P335, C77x through LC.CM.P052, X772 through LC2.TR.P291, C53x through LS.SW.P069, C52x through LS.FA.P150, 25xxN through LCL.CU.P114, N4000 through LC.MD.P119, N4050e through GO.GO.N206, N70xxe through LC.CO.N309, E450 through LM.SZ.P124, E350 through LE.PH.P129, and E250 through LE.PM.P126 printers allows remote attackers to remove the Password Protect administrative password via the vac.255.GENPASSWORD parameter.
Embedded web server command injection vulnerability in Lexmark devices through 2021-12-07.
The initial admin account setup wizard on Lexmark devices allow unauthenticated access to the “out of service erase” feature.
Embedded web server input sanitization vulnerability in Lexmark devices through 2021-12-07, which can which can lead to remote code execution on the device.
Buffer overflow vulnerability has been identified in Lexmark devices through 2021-12-07 in postscript interpreter.
Lexmark Markvision Enterprise (MVE) before 2.4.1 allows remote attackers to execute arbitrary commands by uploading files. (
Race condition in the initialization process on Lexmark printers with firmware ATL before ATL.02.049, CB before CB.02.049, PP before PP.02.049, and YK before YK.02.049 allows remote attackers to bypass authentication by leveraging incorrect detection of the security-jumper status.
Various Lexmark products have an Integer Overflow.
Various Lexmark products have a Buffer Overflow (issue 3 of 3).
Certain Lexmark devices through 2023-02-19 access a Resource By Using an Incompatible Type.
Certain Lexmark devices through 2023-02-19 mishandle Input Validation (issue 3 of 4).
Certain Lexmark devices through 2023-02-19 mishandle Input Validation (issue 4 of 4).
Certain Lexmark devices through 2023-02-19 have an Out-of-bounds Write.
Certain Lexmark devices through 2023-02-19 have Improper Validation of an Array Index.
Certain Lexmark devices through 2023-02-19 mishandle Input Validation (issue 2 of 4).
Certain Lexmark devices through 2023-02-19 have an Integer Overflow.
In certain Lexmark products through 2023-01-12, SSRF can occur because of a lack of input validation.
Directory traversal vulnerability in the LibraryFileUploadServlet servlet in Lexmark Markvision Enterprise allows remote authenticated users to write to and execute arbitrary files via a .. (dot dot) in a file path in a ZIP archive.
Directory traversal vulnerability in the ReportDownloadServlet servlet in Lexmark MarkVision Enterprise before 2.1 allows remote attackers to read arbitrary files via unspecified vectors.
In Lexmark Services Monitor 2.27.4.0.39 (running on TCP port 2070), a remote attacker can use a directory traversal technique using /../../../ or ..%2F..%2F..%2F to obtain local files on the host operating system.
PJL directory traversal vulnerability in Lexmark devices through 2021-12-07 that can be leveraged to overwrite internal configuration files.
Certain older Lexmark devices (C, M, X, and 6500e before 2018-12-18) contain a directory traversal vulnerability in the embedded web server.
A directory traversal vulnerability in file upload function of Gotenberg through 6.2.1 allows an attacker to upload and overwrite any writable files outside the intended folder. This can lead to DoS, a change to program behavior, or code execution.
iSpy v7.2.2.0 is vulnerable to remote command execution via path traversal.
BigBlueButton before 2.2.6 allows remote attackers to read arbitrary files because the presfilename (lowercase) value can be a .pdf filename while the presFilename (mixed case) value has a ../ sequence. This can be leveraged for privilege escalation via a directory traversal to bigbluebutton.properties. NOTE: this issue exists because of an ineffective mitigation to CVE-2020-12112 in which there was an attempted fix within an NGINX configuration file, without considering that the relevant part of NGINX is case-insensitive.
A vulnerability, which was classified as critical, was found in IP Blacklist Cloud Plugin up to 3.42 on WordPress. This affects the function valid_js_identifier of the file ip_blacklist_cloud.php of the component CSV File Import. The manipulation of the argument filename leads to path traversal. It is possible to initiate the attack remotely. Upgrading to version 3.43 is able to address this issue. The identifier of the patch is 6e6fe8c6fda7cbc252eef083105e08d759c07312. It is recommended to upgrade the affected component. The identifier VDB-227757 was assigned to this vulnerability.
The leafInfo.match() function in Beego v2.0.3 and below uses path.join() to deal with wildcardvalues which can lead to cross directory risk.
Dataprobe iBoot-PDU FW versions prior to 1.42.06162022 contain a vulnerability where the device’s existing firmware allows unauthenticated users to access an old PHP page vulnerable to directory traversal, which may allow a user to write a file to the webroot directory.
The decompress package before 4.2.1 for Node.js is vulnerable to Arbitrary File Write via ../ in an archive member, when a symlink is used, because of Directory Traversal.
This vulnerability allows remote attackers to traverse paths via file upload on the affected LG LED Assistant.
An issue was discovered in the File Upload plugin before 4.13.0 for WordPress. A directory traversal can lead to remote code execution by uploading a crafted txt file into the lib directory, because of a wfu_include_lib call.
In Veritas NetBackup before 8.1.2 and NetBackup Appliance before 3.1.2, the BPCD process inadequately validates the file path, allowing an unauthenticated attacker to upload and execute a custom file.
Directory Traversal vulnerability in Marimer LLC CSLA .Net before 8.0 allows a remote attacker to execute arbitrary code via a crafted script to the MobileFormatter component.
Gira TKS-IP-Gateway 4.0.7.7 is vulnerable to unauthenticated path traversal that allows an attacker to download the application database. This can be combined with CVE-2020-10795 for remote root access.
Remote Command program allows an attacker to get Remote Code Execution. This vulnerability can be executed in combination with other vulnerabilities and difficult to execute alone. So, the CVSS score for this vulnerability alone is lower than the score listed in the "Base Score" of this vulnerability. For detail on related other vulnerabilities, please ask to the below contact point. https://www.toshibatec.com/contacts/products/ As for the affected products/models/versions, see the reference URL.
The Toshiba printers provide several ways to upload files using the web interface without authentication. An attacker can overwrite any insecure files. And the Toshiba printers are vulnerable to a Local Privilege Escalation vulnerability. An attacker can remotely compromise any Toshiba printer. The programs can be replaced by malicious programs by any local or remote attacker. This vulnerability can be executed in combination with other vulnerabilities and difficult to execute alone. So, the CVSS score for this vulnerability alone is lower than the score listed in the "Base Score" of this vulnerability. For detail on related other vulnerabilities, please ask to the below contact point. https://www.toshibatec.com/contacts/products/ As for the affected products/models/versions, see the reference URL.
An issue in Jeewms v.3.7 and before allows a remote attacker to escalate privileges via the AuthInterceptor component.
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability exists in SFAPV9601 - APC Easy UPS On-Line Software (V2.0 and earlier) when accessing a vulnerable method of `SoundUploadServlet` which may lead to uploading executable files to non-specified directories.
MileSight DeviceHub - CWE-22 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') may allow Unauthenticated RCE
The Toshiba printers provide several ways to upload files using the admin web interface. An attacker can remotely compromise any Toshiba printer. An attacker can overwrite any insecure files. This vulnerability can be executed in combination with other vulnerabilities and difficult to execute alone. So, the CVSS score for this vulnerability alone is lower than the score listed in the "Base Score" of this vulnerability. For detail on related other vulnerabilities, please ask to the below contact point. https://www.toshibatec.com/contacts/products/ As for the affected products/models/versions, see the reference URL.
A security issue was discovered in GNU Wget2 when handling Metalink documents. The application fails to properly validate file paths provided in Metalink <file name> elements. An attacker can abuse this behavior to write files to unintended locations on the system. This can lead to data loss or potentially allow further compromise of the user’s environment.
A path traversal and arbitrary file upload vulnerability exists in the parisneo/lollms-webui application, specifically within the `@router.get("/switch_personal_path")` endpoint in `./lollms-webui/lollms_core/lollms/server/endpoints/lollms_user.py`. The vulnerability arises due to insufficient sanitization of user-supplied input for the `path` parameter, allowing an attacker to specify arbitrary file system paths. This flaw enables direct arbitrary file uploads, leakage of `personal_data`, and overwriting of configurations in `lollms-webui`->`configs` by exploiting the same named directory in `personal_data`. The issue affects the latest version of the application and is fixed in version 9.4. Successful exploitation could lead to sensitive information disclosure, unauthorized file uploads, and potentially remote code execution by overwriting critical configuration files.
Directory traversal vulnerability in the FTP server on Honeywell Excel Web XL1000C50 52 I/O, XL1000C100 104 I/O, XL1000C500 300 I/O, XL1000C1000 600 I/O, XL1000C50U 52 I/O UUKL, XL1000C100U 104 I/O UUKL, XL1000C500U 300 I/O UUKL, and XL1000C1000U 600 I/O UUKL controllers before 2.04.01 allows remote attackers to read files under the web root, and consequently obtain administrative login access, via a crafted pathname.
stereoscope is a go library for processing container images and simulating a squash filesystem. Prior to version 0.0.1, it is possible to craft an OCI tar archive that, when stereoscope attempts to unarchive the contents, will result in writing to paths outside of the unarchive temporary directory. Specifically, use of `github.com/anchore/stereoscope/pkg/file.UntarToDirectory()` function, the `github.com/anchore/stereoscope/pkg/image/oci.TarballImageProvider` struct, or the higher level `github.com/anchore/stereoscope/pkg/image.Image.Read()` function express this vulnerability. As a workaround, if you are using the OCI archive as input into stereoscope then you can switch to using an OCI layout by unarchiving the tar archive and provide the unarchived directory to stereoscope.
Directory traversal vulnerability in UploadServlet in Novell ZENworks Configuration Management (ZCM) 10 and 11 before 11.3.2 allows remote attackers to execute arbitrary code via a crafted directory name in the uid parameter, in conjunction with a WAR filename in the filename parameter and WAR content in the POST data, a different vulnerability than CVE-2010-5323 and CVE-2010-5324.
A vulnerability classified as critical was found in xiaoyunjie openvpn-cms-flask up to 1.2.7. This vulnerability affects the function Upload of the file app/plugins/oss/app/controller.py of the component File Upload. The manipulation of the argument image leads to path traversal. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.2.8 is able to address this issue. The name of the patch is e23559b98c8ea2957f09978c29f4e512ba789eb6. It is recommended to upgrade the affected component.
F-logic DataCube3 v1.0 is vulnerable to Incorrect Access Control due to an improper directory access restriction. An unauthenticated, remote attacker can exploit this, by sending a URI that contains the path of the configuration file. A successful exploit could allow the attacker to extract the root and admin password.
Aprktool before 2.9.3 on Windows allows ../ and /.. directory traversal.
A remote code execution vulnerability in the project management of Wanxing Technology's Yitu project which allows an attacker to use the exp.adpx file as a zip compressed file to construct a special file name, which can be used to decompress the project file into the system startup folder, restart the system, and automatically execute the constructed attack script.