A vulnerability in the interdevice communications interface of the Cisco IP Interoperability and Collaboration System (IPICS) Universal Media Services (UMS) could allow an unauthenticated, remote attacker to modify configuration parameters of the UMS and cause the system to become unavailable. Affected Products: This vulnerability affects Cisco IPICS releases 4.8(1) to 4.10(1). More Information: CSCva46644. Known Affected Releases: 4.10(1) 4.8(1) 4.8(2) 4.9(1) 4.9(2).

A vulnerability in the REST API interface of Cisco Vision Dynamic Signage Director could allow an unauthenticated, remote attacker to bypass authentication on an affected system. The vulnerability is due to insufficient validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to execute arbitrary actions through the REST API with administrative privileges on the affected system. The REST API is enabled by default and cannot be disabled.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to acquire a valid session token with administrator privileges, bypassing user authentication. The vulnerability is due to insufficient request header validation during the authentication process. An attacker could exploit this vulnerability by sending a series of malicious requests to an affected device. An exploit could allow the attacker to use the acquired session token to gain full administrator access to the affected device.

A vulnerability in the web-based management interface of Cisco UCS Director and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper authentication request handling. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow an unprivileged attacker to access and execute arbitrary actions through certain APIs.

A vulnerability in the REST API of Cisco Elastic Services Controller (ESC) could allow an unauthenticated, remote attacker to bypass authentication on the REST API. The vulnerability is due to improper validation of API requests. An attacker could exploit this vulnerability by sending a crafted request to the REST API. A successful exploit could allow the attacker to execute arbitrary actions through the REST API with administrative privileges on an affected system.

Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access

The Cisco Unified IP Conference Station 7935 3.2(15) and earlier, and Station 7936 3.3(12) and earlier does not properly handle administrator HTTP sessions, which allows remote attackers to bypass authentication controls via a direct URL request to the administrative HTTP interface for a limited time

The Adaptive Security Device Management (ASDM) remote-management feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.6) does not properly implement the authentication-certificate option, which allows remote attackers to bypass authentication via a TCP session to an ASDM interface, aka Bug ID CSCuh44815.

A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper handling of Lightweight Directory Access Protocol (LDAP) authentication responses from an external authentication server. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to gain administrative access to the web-based management interface of the affected device.

A vulnerability in the web-based graphical user interface (GUI) of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. Cisco Prime Home versions 5.1.1.6 and earlier and 5.2.2.2 and earlier have been confirmed to be vulnerable. Cisco Prime Home versions 6.0 and later are not vulnerable. More Information: CSCvb71732. Known Affected Releases: 5.0 5.0(1) 5.0(1.1) 5.0(1.2) 5.0(2) 5.15.1(0) 5.1(1) 5.1(1.3) 5.1(1.4) 5.1(1.5) 5.1(1.6) 5.1(2) 5.1(2.1) 5.1(2.3) 5.25.2(0.1) 5.2(1.0) 5.2(1.2) 5.2(2.0) 5.2(2.1) 5.2(2.2).

Cisco NX-OS 6.0(2)U6(1) through 6.0(2)U6(5) on Nexus 3000 devices and 6.0(2)A6(1) through 6.0(2)A6(5) and 6.0(2)A7(1) on Nexus 3500 devices has hardcoded credentials, which allows remote attackers to obtain root privileges via a (1) TELNET or (2) SSH session, aka Bug ID CSCuy25800.

Cisco Wireless LAN Controller (WLC) devices with software 7.6.x, 8.0 before 8.0.121.0, and 8.1 before 8.1.131.0 allow remote attackers to change configuration settings via unspecified vectors, aka Bug ID CSCuw06153.

The Java Servlet framework on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 and Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug IDs CSCtf42005 and CSCtf42008.

The Java Servlet framework on Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug ID CSCtf01253.

The Disaster Recovery Framework (DRF) master server in Cisco Unified Communications products, including Unified Communications Manager (CUCM) 5.x and 6.x, Unified Presence 1.x and 6.x, Emergency Responder 2.x, and Mobility Manager 2.x, does not require authentication for requests received from the network, which allows remote attackers to execute arbitrary code via unspecified vectors.

SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte.

The telnet service in Cisco Video Surveillance IP Gateway Encoder/Decoder (Standalone and Module) firmware 1.8.1 and earlier, Video Surveillance SP/ISP Decoder Software firmware 1.11.0 and earlier, and the Video Surveillance SP/ISP firmware 1.23.7 and earlier does not require authentication, which allows remote attackers to perform administrative actions, aka CSCsj31729.

The default installation of Cisco voice products, when running the IBM Director Agent on IBM servers before OS 2000.2.6, does not require authentication, which allows remote attackers to gain administrator privileges by connecting to TCP port 14247.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

A vulnerability in the web-based GUI of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication and execute actions with administrator privileges. The vulnerability is due to a processing error in the role-based access control (RBAC) of URLs. An attacker could exploit this vulnerability by sending API commands via HTTP to a particular URL without prior authentication. An exploit could allow the attacker to perform any actions in Cisco Prime Home with administrator privileges. This vulnerability affects Cisco Prime Home versions from 6.3.0.0 to the first fixed release 6.5.0.1. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCvb49837.

A vulnerability in the upgrade mechanism of Cisco collaboration products based on the Cisco Voice Operating System software platform could allow an unauthenticated, remote attacker to gain unauthorized, elevated access to an affected device. The vulnerability occurs when a refresh upgrade (RU) or Prime Collaboration Deployment (PCD) migration is performed on an affected device. When a refresh upgrade or PCD migration is completed successfully, an engineering flag remains enabled and could allow root access to the device with a known password. If the vulnerable device is subsequently upgraded using the standard upgrade method to an Engineering Special Release, service update, or a new major release of the affected product, this vulnerability is remediated by that action. Note: Engineering Special Releases that are installed as COP files, as opposed to the standard upgrade method, do not remediate this vulnerability. An attacker who can access an affected device over SFTP while it is in a vulnerable state could gain root access to the device. This access could allow the attacker to compromise the affected system completely. Cisco Bug IDs: CSCvg22923, CSCvg55112, CSCvg55128, CSCvg55145, CSCvg58619, CSCvg64453, CSCvg64456, CSCvg64464, CSCvg64475, CSCvg68797.

A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to bypass user authentication and gain access as an administrative user. The vulnerability is due to insufficient request header validation during the authentication process. An attacker could exploit this vulnerability by sending a series of malicious requests to an affected device. An exploit could allow the attacker to gain full administrative access to the affected device.

A vulnerability in the Cisco REST API virtual service container for Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass authentication on the managed Cisco IOS XE device. The vulnerability is due to an improper check performed by the area of code that manages the REST API authentication service. An attacker could exploit this vulnerability by submitting malicious HTTP requests to the targeted device. A successful exploit could allow the attacker to obtain the token-id of an authenticated user. This token-id could be used to bypass authentication and execute privileged actions through the interface of the REST API virtual service container on the affected Cisco IOS XE device. The REST API interface is not enabled by default and must be installed and activated separately on IOS XE devices. See the Details section for more information.

Cisco UCS Central Software before 1.3(1a) allows remote attackers to execute arbitrary commands via a crafted HTTP request, aka Bug ID CSCut46961.

A vulnerability in the REST API of Cisco IoT Field Network Director (FND) could allow an unauthenticated, remote attacker to access the back-end database of an affected system. The vulnerability exists because the affected software does not properly authenticate REST API calls. An attacker could exploit this vulnerability by obtaining a cross-site request forgery (CSRF) token and then using the token with REST API requests. A successful exploit could allow the attacker to access the back-end database of the affected device and read, alter, or drop information.

A vulnerability in the REST API of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability exists because different installations share a static encryption key. An attacker could exploit this vulnerability by using the static key to craft a valid session token. A successful exploit could allow the attacker to perform arbitrary actions through the REST API with administrative privileges.

Multiple vulnerabilities in the API subsystem of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to execute arbitrary code with root privileges. The vulnerabilities are due to improper boundary checks for certain user-supplied input. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the API subsystem of an affected system. When this request is processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the underlying operating system (OS).

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the authorization controls for the Cisco IOx application hosting infrastructure in Cisco IOS XE Software could allow an unauthenticated, remote attacker to execute Cisco IOx API commands without proper authorization. The vulnerability is due to incorrect handling of requests for authorization tokens. An attacker could exploit this vulnerability by using a crafted API call to request such a token. An exploit could allow the attacker to obtain an authorization token and execute any of the IOx API commands on an affected device.

The web server on Cisco DPC3010, DPC3212, DPC3825, DPC3925, DPQ3925, EPC3010, EPC3212, EPC3825, and EPC3925 Wireless Residential Gateway products allows remote attackers to execute arbitrary code via a crafted HTTP request, aka Bug ID CSCup40808.

Cisco Unified Communications Domain Manager (CDM) in Unified CDM Platform Software before 4.4.2 has a hardcoded SSH private key, which makes it easier for remote attackers to obtain access to the support and root accounts by extracting this key from a binary file found in a different installation of the product, aka Bug ID CSCud41130.

The web interface in Cisco Secure Access Control System (ACS) 5.x before 5.4 Patch 3 allows remote attackers to execute arbitrary operating-system commands via a request to this interface, aka Bug ID CSCue65962.

Multiple buffer overflows in securecgi-bin/CSuserCGI.exe in User-Changeable Password (UCP) before 4.2 in Cisco Secure Access Control Server (ACS) for Windows and ACS Solution Engine allow remote attackers to execute arbitrary code via a long argument located immediately after the Logout argument, and possibly unspecified other vectors.

The web management interface on the Cisco RV110W firewall with firmware 1.2.0.9 and earlier, RV215W router with firmware 1.1.0.5 and earlier, and CVR100W router with firmware 1.0.1.19 and earlier does not prevent replaying of modified authentication requests, which allows remote attackers to obtain administrative access by leveraging the ability to intercept requests, aka Bug IDs CSCul94527, CSCum86264, and CSCum86275.

The Cisco WAP4410N access point with firmware through 2.0.6.1, WRVS4400N router with firmware 1.x through 1.1.13 and 2.x through 2.0.2.1, and RVS4000 router with firmware through 2.0.3.2 allow remote attackers to read credential and configuration data, and execute arbitrary commands, via requests to the test interface on TCP port 32764, aka Bug IDs CSCum37566, CSCum43693, CSCum43700, and CSCum43685.

A vulnerability in the Transaction Language 1 (TL1) code of Cisco ASR 900 Series routers could allow an unauthenticated, remote attacker to cause a reload of, or remotely execute code on, the affected system. This vulnerability affects Cisco ASR 900 Series Aggregation Services Routers (ASR902, ASR903, and ASR907) that are running the following releases of Cisco IOS XE Software: 3.17.0S 3.17.1S 3.17.2S 3.18.0S 3.18.1S. More Information: CSCuy15175. Known Affected Releases: 15.6(1)S 15.6(2)S. Known Fixed Releases: 15.6(1)S2.12 15.6(1.17)S0.41 15.6(1.17)SP 15.6(2)SP 16.4(0.183) 16.5(0.10).

Buffer overflow in Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SCCP and SIP firmware might allow remote attackers to execute arbitrary code via a crafted DNS response.

Buffer overflow in the IKEv1 and IKEv2 implementations in Cisco ASA Software before 8.4(7.30), 8.7 before 8.7(1.18), 9.0 before 9.0(4.38), 9.1 before 9.1(7), 9.2 before 9.2(4.5), 9.3 before 9.3(3.7), 9.4 before 9.4(2.4), and 9.5 before 9.5(2.2) on ASA 5500 devices, ASA 5500-X devices, ASA Services Module for Cisco Catalyst 6500 and Cisco 7600 devices, ASA 1000V devices, Adaptive Security Virtual Appliance (aka ASAv), Firepower 9300 ASA Security Module, and ISA 3000 devices allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via crafted UDP packets, aka Bug IDs CSCux29978 and CSCux42019.

The web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote attackers to execute arbitrary code as root via a crafted HTTP request, aka Bug ID CSCux82428.

Multiple vulnerabilities in the web management interface of Cisco Small Business 220 Series Smart Switches could allow an unauthenticated, remote attacker to overflow a buffer, which then allows the execution of arbitrary code with root privileges on the underlying operating system. The vulnerabilities are due to insufficient validation of user-supplied input and improper boundary checks when reading data into an internal buffer. An attacker could exploit these vulnerabilities by sending malicious requests to the web management interface of an affected device. Depending on the configuration of the affected switch, the malicious requests must be sent via HTTP or HTTPS.

Heap-based buffer overflow in the Certificate Trust List (CTL) Provider service (CTLProvider.exe) in Cisco Unified Communications Manager (CUCM) 4.2 before 4.2(3)SR3 and 4.3 before 4.3(1)SR1, and CallManager 4.0 and 4.1 before 4.1(3)SR5c, allows remote attackers to cause a denial of service or execute arbitrary code via a long request.

A vulnerability in Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to log in to the CLI of an affected system by using the SCP User account (scpuser), which has default user credentials. The vulnerability is due to the presence of a documented default account with an undocumented default password and incorrect permission settings for that account. Changing the default password for this account is not enforced during the installation of the product. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the scpuser account. This includes full read and write access to the system's database.

A vulnerability in the web portal of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to perform a command injection attack and execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation by the web portal framework. An attacker could exploit this vulnerability by providing malicious input during web portal authentication. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute code with root-level privileges on the underlying operating system. This vulnerability exist because the software improperly validates user-supplied input. An attacker could exploit this vulnerability by uploading a malicious file to the administrative web interface. A successful exploit could allow the attacker to execute code with root-level privileges on the underlying operating system.

A vulnerability in the Cisco Common Services Platform Collector (CSPC) could allow an unauthenticated, remote attacker to access an affected device by using an account that has a default, static password. This account does not have administrator privileges. The vulnerability exists because the affected software has a user account with a default, static password. An attacker could exploit this vulnerability by remotely connecting to the affected system using this account. A successful exploit could allow the attacker to log in to the CSPC using the default account. For Cisco CSPC 2.7.x, Cisco fixed this vulnerability in Release 2.7.4.6. For Cisco CSPC 2.8.x, Cisco fixed this vulnerability in Release 2.8.1.2.

Buffer overflow in the Centralized TFTP File Locator Service in Cisco Unified Communications Manager (CUCM, formerly CallManager) 5.1 before 5.1(3), and Unified CallManager 5.0, allows remote attackers to execute arbitrary code or cause a denial of service via unspecified vectors involving the processing of filenames, aka CSCsh47712.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user. RV110W Wireless-N VPN Firewall versions prior to 1.2.2.1 are affected. RV130W Wireless-N Multifunction VPN Router versions prior to 1.0.3.45 are affected. RV215W Wireless-N VPN Router versions prior to 1.3.1.1 are affected.