The BWOCXRUN.BwocxrunCtrl.1 control contains a method named “CreateProcess.” This method contains validation to ensure an attacker cannot run arbitrary command lines. After validation, the values supplied in the HTML are passed to the Windows CreateProcessA API. The validation can be bypassed allowing for running arbitrary command lines. The command line can specify running remote files (example: UNC command line). A function exists at offset 100019B0 of bwocxrun.ocx. Inside this function, there are 3 calls to strstr to check the contents of the user specified command line. If “\setup.exe,” “\bwvbprt.exe,” or “\bwvbprtl.exe” are contained in the command line (strstr returns nonzero value), the command line passes validation and is then passed to CreateProcessA.
A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function setAppFilterCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument enable results in os command injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.
WAVLINK WN572HP3, WN533A8, WN530H4, WN535G3, WN531P3 nas.cgi has no filtering on parameters: User1Passwd and User1, which leads to command injection in page /nas_disk.shtml.
Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.ddnsStatus DynDNS function via the mailex parameter.
A vulnerability was found in Caton Prime 2.1.2.51.e8d7225049(202303031001) and classified as critical. This issue affects some unknown processing of the file cgi-bin/tools_ping.cgi?action=Command of the component Ping Handler. The manipulation of the argument Destination leads to command injection. The attack may be initiated remotely. The associated identifier of this vulnerability is VDB-228011. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A weakness has been identified in Wavlink WL-WN570HA1 R70HA1 V1410_221110. This issue affects the function set_sys_adm of the file /cgi-bin/adm.cgi. This manipulation of the argument Username causes command injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. Once again the vendors acted very professional and confirms, "that the WN570HA1 firmware version R70HA1 V1410_221110 has been removed from our website." This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function Vulnerability of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument proto leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used.
A vulnerability was found in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this vulnerability is the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument command results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used.
A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setUrlFilterRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument enable results in os command injection. The attack can be launched remotely. The exploit has been made public and could be used.
TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the host_time parameter in the NTPSyncWithHost function.
A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this vulnerability is the function setTtyServiceCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument ttyEnable leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.
A command injection vulnerability in the serverIp parameter in the function meshSlaveDlfw of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.
A vulnerability has been found in jackwrichards FastlyMCP up to 6f3d0b0e654fc51076badc7fa16c03c461f95620. This impacts an unknown function of the file fastly-mcp.mjs of the component fastly_cli Tool. The manipulation of the argument command leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function CsteSystem of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument HTTP leads to os command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.
A flaw has been found in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function setWiFiAclRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument mode causes os command injection. The attack is possible to be carried out remotely. The exploit has been published and may be used.
A vulnerability was found in Totolink A7100RU 7.4cu.2313_b20191024. This impacts the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument FileName results in os command injection. The attack may be initiated remotely. The exploit has been made public and could be used.
A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. Affected by this vulnerability is the function setIpv6LanCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument addrPrefixLen can lead to os command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.
A vulnerability was detected in Totolink A7100RU 7.4cu.2313_b20191024. The affected element is the function setVpnAccountCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument User results in os command injection. The attack may be launched remotely. The exploit is now public and may be used.
TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagHost parameter in the setNetworkDiag function.
A flaw has been found in AgentDeskAI browser-tools-mcp up to 1.2.0. This issue affects some unknown processing of the file browser-tools-server/browser-connector.ts. Executing a manipulation can lead to os command injection. The attack may be performed from remote. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. Affected is the function setIptvCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument setIptvCfg results in os command injection. The attack can be initiated remotely. The exploit has been made public and could be used.
The PdfBook extension through 2.0.5 before b07b6a64 for MediaWiki allows command injection via an option.
Possible Command Injection in iManager GET parameter has been discovered in OpenText™ iManager 3.2.6.0000.
A vulnerability was found in choieastsea simple-openstack-mcp up to 767b2f4a8154cca344344b9725537a58399e6036. The affected element is the function exec_openstack of the file server.py. The manipulation results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The project was informed of the problem early through an issue report but has not responded yet.
A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setWiFiWpsStart of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument wscDisabled leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A security flaw has been discovered in Totolink A7100RU 7.4cu.2313_b20191024. This vulnerability affects the function setPortalConfWeChat of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument enable results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.
A vulnerability was detected in PicoClaw up to 0.2.4. Impacted is an unknown function of the file /api/gateway/restart of the component Web Launcher Management Plane. Performing a manipulation results in command injection. It is possible to initiate the attack remotely. The project was informed of the problem early through an issue report but has not responded yet.
TOTOlink A7100RU(V7.4cu.2313_B20191024) was discovered to contain a command injection vulnerability via the province parameter at setting/delStaticDhcpRules.
A vulnerability was determined in D-Link DIR-822 A_101. The impacted element is the function system of the file /udhcpcd/dhcpd.c of the component udhcpd DHCP Service. This manipulation of the argument Hostname causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.
TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagPingSize parameter in the setNetworkDiag function.
TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagPingTimeOut parameter in the setNetworkDiag function.
TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagTracertHop parameter in the setNetworkDiag function.
TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the minute parameter in the setRebootScheCfg function.
A vulnerability has been found in Totolink A7100RU 7.4cu.2313_b20191024. This vulnerability affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument ip leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.
Command Injection vulnerability in D-Link Dir 816 with firmware version DIR-816_A2_v1.10CNB04 allows attackers to run arbitrary commands via the urlAdd parameter.
A command injection vulnerability in the ip parameter in the function recvSlaveCloudCheckStatus of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.
A vulnerability was detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this issue is the function setNetworkCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument proto results in os command injection. The attack may be initiated remotely. The exploit is now public and may be used.
A security vulnerability has been detected in Intina47 context-sync up to 2.0.0. This affects an unknown part of the file src/git-integration.ts of the component Git Integration. Such manipulation leads to os command injection. The attack can be executed remotely. The exploit has been disclosed publicly and may be used.
TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the admpass parameter in the setPasswordCfg function.
TOTOlink A7100RU(V7.4cu.2313_B20191024) was discovered to contain a command injection vulnerability via the city parameter at setting/delStaticDhcpRules.
TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the webWlanIdx parameter in the setWebWlanIdx function.
In Pluck-4.7.10-dev2 admin background, a remote command execution vulnerability exists when uploading files.
A command injection vulnerability in the serverIp parameter in the function updateWifiInfo of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.
TOTOlink A7100RU(V7.4cu.2313_B20191024) was discovered to contain a command injection vulnerability via the country parameter at setting/delStaticDhcpRules.
TOTOLink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability.
TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the hour parameter in the setRebootScheCfg function.
D-link DI-8100 16.07.26A1 is vulnerable to Command Injection. An attacker can exploit this vulnerability by crafting specific HTTP requests, triggering the command execution flaw and gaining the highest privilege shell access to the firmware system.
TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the plugin_version parameter in the setUnloadUserData function.
TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the FileName parameter in the setUploadUserData function.
An issue in craigms/main.php of CraigMS 1.0 allows attackers to execute arbitrary commands via a crafted input entered into the DB Name field.