The web-based file-restore interface in EMC Avamar Server before 6.1.0 allows remote authenticated users to read arbitrary files via a crafted URL.

EMC RSA Archer GRC 5.5.x before 5.5.3.4 allows remote authenticated users to read the web.config.bak file, and obtain sensitive credential information, by modifying the IIS configuration to set a Content-Type header for .bak files.

Lockbox in EMC Documentum D2 before 4.5 uses a hardcoded passphrase when a server lacks a D2.Lockbox file, which makes it easier for remote authenticated users to decrypt admin tickets by locating this passphrase in a decompiled D2 JAR archive.

The NetWorker Management Console (NMC) in EMC NetWorker 8.0.x before 8.0.2.3, when using Active Directory/LDAP for authentication, allows remote authenticated users to discover cleartext administrator passwords via (1) unspecified NMC audit reports or (2) requests to RAP resources.

The default configuration of ExShortcut\Web.config in EMC SourceOne Email Management before 6.6 SP1, when the Mobile Services component is used, does not properly set the localOnly attribute of the trace element, which allows remote authenticated users to obtain sensitive information via ASP.NET Application Tracing.

The service utility in EMC Avamar 5.x before 5.0.4 uses cleartext to transmit event details in (1) service requests and (2) e-mail messages, which might allow remote attackers to obtain sensitive information by sniffing the network.

Directory traversal vulnerability in EMC Document Sciences xPression 4.1 SP1 before Patch 47, 4.2 before Patch 26, and 4.5 before Patch 05, as used in Documentum Edition, Enterprise Edition Publish Engine, and Enterprise Edition Compuset Engine, allows remote authenticated users to read arbitrary files by leveraging xDashboard access.

EMC RSA Archer 5.4.1.3, 5.5.3.1, 5.5.2.3, 5.5.2, 5.5.1.3.1, 5.5.1.1 is affected by an authorization bypass through user-controlled key vulnerability in Discussion Forum Messages. A remote low privileged attacker may potentially exploit this vulnerability to elevate their privileges and view other users' discussion forum messages.

EMC RSA Archer 5.4.1.3, 5.5.3.1, 5.5.2.3, 5.5.2, 5.5.1.3.1, 5.5.1.1 is affected by an information exposure through an error message vulnerability. A remote low privileged attacker may potentially exploit this vulnerability to use information disclosed in an error message to launch another more focused attack.

EMC ESRS VE 3.18 or earlier contains Authentication Bypass that could potentially be exploited by malicious users to compromise the affected system.

EMC RSA Archer 5.4.1.3, 5.5.3.1, 5.5.2.3, 5.5.2, 5.5.1.3.1, 5.5.1.1 is affected by an information exposure through an error message vulnerability. A remote low privileged attacker may potentially exploit this vulnerability to use information disclosed in an error message to launch another more focused attack.

Dell EMC RecoverPoint versions prior to 5.1.2.1 and RecoverPoint for VMs versions prior to 5.2.0.2 contain an information disclosure vulnerability. A malicious boxmgmt user may potentially be able to determine the existence of any system file via Boxmgmt CLI.

EMC RecoverPoint versions prior to 5.0 and EMC RecoverPoint for Virtual Machines versions prior to 5.0 have an SSL Stripping Vulnerability that may potentially be exploited by malicious users to compromise the affected system.

EMC Documentum D2 4.5 before patch 15 and 4.6 before patch 03 allows remote attackers to read arbitrary Docbase documents by leveraging knowledge of an r_object_id value.

Dell EMC ViPR Controller, versions after 3.0.0.38, contain an information exposure vulnerability in the VRRP. VRRP defaults to an insecure configuration in Linux's keepalived component which sends the cluster password in plaintext through multicast. A malicious user, having access to the vCloud subnet where ViPR is deployed, could potentially sniff the password and use it to take over the cluster's virtual IP and cause a denial of service on that ViPR Controller system.

EMC RSA Identity Management and Governance before 6.8.1 P25 and 6.9.x before 6.9.1 P15 and RSA Via Lifecycle and Governance before 7.0.0 P04 allow remote authenticated users to obtain User Detail Popup information via a modified URL.

EMC PowerPath Virtual (Management) Appliance 2.0, EMC PowerPath Virtual (Management) Appliance 2.0 SP1 is affected by a sensitive information disclosure vulnerability that may potentially be exploited by malicious users to compromise the affected system.

Avamar Data Store (ADS) and Avamar Virtual Edition (AVE) in EMC Avamar Server before 7.3.0-233 use the same encryption key across different customers' installations, which allows remote attackers to defeat cryptographic protection mechanisms and obtain sensitive client-server traffic information by leveraging knowledge of this key from another installation.

EMC Documentum xCP 2.1 before patch 24 and 2.2 before patch 12 allows remote authenticated users to obtain sensitive user-account metadata via a members/xcp_member API call.

EMC RSA Data Loss Prevention 9.6 before SP2 P5 allows remote authenticated users to obtain sensitive information by reading error messages.

Avamar Data Store (ADS) and Avamar Virtual Edition (AVE) in EMC Avamar Server before 7.3.0-233 rely on client-side authentication, which allows remote attackers to spoof clients and read backup data via a modified client agent.

Reviewer in EMC SourceOne Email Supervisor before 7.2 does not properly limit attempts to authenticate, which makes it easier for remote attackers to obtain access via a brute-force approach.

Directory traversal vulnerability in the API in EMC Secure Remote Services Virtual Edition 3.x before 3.10 allows remote authenticated users to read log files via a crafted parameter.

The default configuration of EMC VPLEX GeoSynchrony 5.4 SP1 before P3 stores cleartext NAVISPHERE GUI passwords in a log file, which allows local users to obtain sensitive information by reading this file.

Directory traversal vulnerability in EMC Avamar Server 7.x before 7.1.2 and Avamar Virtual Addition (AVE) 7.x before 7.1.2 allows remote attackers to read arbitrary files by using the Avamar Desktop/Laptop client interface to send crafted parameters.

The D2-API component in EMC Documentum D2 3.1 through SP1, 4.0 and 4.1 before 4.1 P22, and 4.2 before P11 places the MD5 hash of an encryption passphrase in log files, which allows remote authenticated users to obtain sensitive information by reading a file.

The InputAccel Database (IADB) installation process in EMC Captiva Capture 7.0 before patch 25 and 7.1 before patch 13 places a cleartext InputAccel (IA) SQL password in a DAL log file, which allows local users to obtain sensitive information by reading a file.

EMC M&R (aka Watch4Net) before 6.5u1 and ViPR SRM before 3.6.1 might allow remote attackers to obtain cleartext data-center discovery credentials by leveraging certain SRM access to conduct a decryption attack.

EMC Documentum xCelerated Management System (xMS) 1.1 before P14 stores cleartext Windows Service credentials in a batch file during Documentum Platform and xCelerated Composition Platform (xCP) provisioning, which allows local users to obtain sensitive information by reading a file.

EMC Documentum Web Development Kit (WDK) before 6.8 allows remote attackers to conduct frame-injection attacks and obtain sensitive information via unspecified vectors.

The EMC NetWorker Module for MEDITECH (aka NMMEDI) 3.0 build 87 through 90, when EMC RecoverPoint and Plink are used, stores cleartext RecoverPoint Appliance credentials in nsrmedisv.raw log files, which allows local users to obtain sensitive information by reading these files.

EMC Documentum Content Server before 6.7 SP2 P16 and 7.x before 7.1 P07 allows remote authenticated users to read sensitive object metadata via an RPC command.

The default configuration of EMC RecoverPoint Appliance (RPA) 4.1 before 4.1.0.1 does not enable a firewall, which allows remote attackers to obtain potentially sensitive information about open ports, or cause a denial of service, by sending packets to many ports.

The JAXB XML parser in EMC Documentum Foundation Services (DFS) 6.6 before P39, 6.7 SP1 before P28, and 6.7 SP2 before P15, as used in My Documentum for Desktop, My Documentum for Microsoft Outlook, and CenterStage, allows remote authenticated users to read arbitrary files via an external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue.

EMC Cloud Tiering Appliance (CTA) 10 through SP1 allows remote attackers to read arbitrary files via an api/login request containing an XML external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue, as demonstrated by reading the /etc/shadow file.

The SAN Manager Master Agent service (aka msragent.exe) in EMC Control Center before 6.1 does not properly authenticate SST_SENDFILE requests, which allows remote attackers to read arbitrary files.

EMC NetWorker 7.6.x and 8.x before 8.1 allows local users to obtain sensitive configuration information by leveraging operating-system privileges to perform decryption with nsradmin.

EMC RSA Archer Security Operations Management with RSA Unified Collector Framework versions prior to 1.3.1.52 contain a sensitive information disclosure vulnerability that could potentially be exploited by malicious users to compromise an affected system.

EMC RSA Archer GRC 5.x before 5.5.3 uses cleartext for stored passwords in unspecified circumstances, which allows remote authenticated users to obtain sensitive information by reading database fields.

IBM Security AppScan Enterprise 5.6 through 8.7.0.1 allows remote authenticated users to read arbitrary report files by leveraging knowledge of filenames that cannot be easily predicted.

IBM FileNet Business Process Framework 4.1.0 allows remote authenticated users to read arbitrary files or send TCP requests to intranet servers via XML data containing an external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue.

NetApp OnCommand Unified Manager for 7-Mode (core package) versions prior to 5.2.3 may disclose sensitive LDAP account information to authenticated users when the LDAP authentication configuration is tested via the user interface.

NetIQ Access Manager 4.2 before SP3 HF1 and 4.3 before SP1 HF1, when configured as a SAML 2.0 Identity Server with Virtual Attributes, has a concurrency issue causing information leakage, related to a stale profile.

Discourse is an open source discussion platform. In affected versions a vulnerability affects users of tag groups who use the "Tags are visible only to the following groups" feature. A tag group may only allow a certain group (e.g. staff) to view certain tags. Users who were tracking or watching the tags via /preferences/tags, then have their staff status revoked will still see notifications related to the tag, but will not see the tag on each topic. This issue has been patched in stable version 2.7.11. Users are advised to upgrade as soon as possible.

If multiple users are concurrently logged into a single system where one user is sending a command via the Lenovo ToolsCenter Advanced Settings Utility (ASU), UpdateXpress System Pack Installer (UXSPI) or Dynamic System Analysis (DSA) to a second machine, the other users may be able to see the user ID and clear text password that were used to access the second machine during the time the command is processing.

Vulnerability in the Oracle Hospitality OPERA 5 Property Services component of Oracle Hospitality Applications (subcomponent: OPERA Room Image/Picture Setup). Supported versions that are affected are 5.4.0.x, 5.4.1.x, 5.4.2.x, 5.4.3.x, 5.5.0.x and 5.5.1.x. Easily "exploitable" vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hospitality OPERA 5 Property Services. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Hospitality OPERA 5 Property Services accessible data. CVSS 3.0 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N).

All versions of Samba prior to 4.15.5 are vulnerable to a malicious client using a server symlink to determine if a file or directory exists in an area of the server file system not exported under the share definition. SMB1 with unix extensions has to be enabled in order for this attack to succeed.

A vulnerability, which was classified as problematic, was found in ProjectSend r754. This affects an unknown part of the file process.php?do=zip_download. The manipulation of the argument client/file leads to information disclosure. It is possible to initiate the attack remotely.

Cybozu Mailwise 5.0.4 and 5.0.5 allows remote authenticated users to obtain sensitive e-mail content intended for different persons in opportunistic circumstances by reading Subject header lines within the user's own mailbox.

The firewall module on the Huawei Quidway Service Process Unit (SPU) board S7700, S9300, and S9700 on Huawei Campus Switch devices allows remote authenticated users to obtain sensitive information from the high-priority security zone by leveraging access to the low-priority security zone.