The shadow_copy2_get_shadow_copy_data function in modules/vfs_shadow_copy2.c in Samba 3.x and 4.x before 4.1.22, 4.2.x before 4.2.7, and 4.3.x before 4.3.3 does not verify that the DIRECTORY_LIST access right has been granted, which allows remote attackers to access snapshots by visiting a shadow copy directory.
Samba 3.x before 3.6.23, 4.0.x before 4.0.16, and 4.1.x before 4.1.6 does not enforce the password-guessing protection mechanism for all interfaces, which makes it easier for remote attackers to obtain access via brute-force ChangePasswordUser2 (1) SAMR or (2) RAP attempts.
Samba Web Administration Tool (SWAT) in Samba 2.0.7 supplies a different error message when a valid username is provided versus an invalid name, which allows remote attackers to identify valid users on the server.
Samba before 4.7.3 might allow remote attackers to obtain sensitive information by leveraging failure of the server to clear allocated heap memory.
All versions of Samba prior to 4.15.5 are vulnerable to a malicious client using a server symlink to determine if a file or directory exists in an area of the server file system not exported under the share definition. SMB1 with unix extensions has to be enabled in order for this attack to succeed.
Memory leak in smbd in Samba 3.6.x before 3.6.3 allows remote attackers to cause a denial of service (memory and CPU consumption) by making many connection requests.
CF CLI version prior to v6.45.0 (bosh release version 1.16.0) writes the client id and secret to its config file when the user authenticates with --client-credentials flag. A local authenticated malicious user with access to the CF CLI config file can act as that client, who is the owner of the leaked credentials.
An information leak flaw was found in the way SMB1 protocol was implemented by Samba before 4.4.16, 4.5.x before 4.5.14, and 4.6.x before 4.6.8. A malicious client could use this flaw to dump server memory contents to a file on the samba share or to a shared printer, though the exact area of server memory cannot be controlled by the attacker.
The fix in 4.6.16, 4.7.9, 4.8.4 and 4.9.7 for CVE-2018-10919 Confidential attribute disclosure vi LDAP filters was insufficient and an attacker may be able to obtain confidential BitLocker recovery keys from a Samba AD DC.
A flaw was found in Samba. Some SMB1 write requests were not correctly range-checked to ensure the client had sent enough data to fulfill the write, allowing server memory contents to be written into the file (or printer) instead of client-supplied data. The client cannot control the area of the server memory written to the file (or printer).
The Samba Active Directory LDAP server was vulnerable to an information disclosure flaw because of missing access control checks. An authenticated attacker could use this flaw to extract confidential attribute values using LDAP search expressions. Samba versions before 4.6.16, 4.7.9 and 4.8.4 are vulnerable.
smbd in Samba 3.0.29 through 3.2.4 might allow remote attackers to read arbitrary memory and cause a denial of service via crafted (1) trans, (2) trans2, and (3) nttrans requests, related to a "cut&paste error" that causes an improper bounds check to be performed.
The web portal interface in Citrix Access Gateway (aka Citrix Advanced Access Control) before Advanced Edition 4.5 HF1 places a session ID in the URL, which allows context-dependent attackers to hijack sessions by reading "residual information", including the a referer log, browser history, or browser cache.
A Disclosure of Sensitive Information vulnerability in HPE SiteScope version v11.2x, v11.3x was found.
Certain NETGEAR devices are affected by disclosure of sensitive information. This affects EAX80 before 1.0.1.62, EX7000 before 1.0.1.104, R6120 before 1.0.0.76, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.78, R6850 before 1.1.0.78, R6350 before 1.1.0.78, R6330 before 1.1.0.78, R6800 before 1.2.0.76, R6900v2 before 1.2.0.76, R6700v2 before 1.2.0.76, R7000 before 1.0.11.116, R6900P before 1.3.3.140, R7000P before 1.3.3.140, R7200 before 1.2.0.76, R7350 before 1.2.0.76, R7400 before 1.2.0.76, R7450 before 1.2.0.76, AC2100 before 1.2.0.76, AC2400 before 1.2.0.76, AC2600 before 1.2.0.76, R7900 before 1.0.4.38, R7960P before 1.4.1.66, R8000 before 1.0.4.68, R7900P before 1.4.1.66, R8000P before 1.4.1.66, RAX15 before 1.0.2.82, RAX20 before 1.0.2.82, RAX200 before 1.0.3.106, RAX45 before 1.0.2.72, RAX50 before 1.0.2.72, RAX75 before 1.0.3.106, and RAX80 before 1.0.3.106.
CA Identity Manager r12.6 to r12.6 SP8, 14.0, and 14.1 allows remote attackers to potentially identify passwords of locked accounts through an exhaustive search.
IBM Flex System Manager (FSM) 1.1 through 1.3 before 1.3.2.0 allows remote attackers to enumerate user accounts via unspecified vectors.
There is LFD (local file disclosure) on BE126 WIFI repeater 1.0 devices that allows attackers to read the entire filesystem on the device via a crafted getpage parameter.
Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R7000 before 1.0.11.110, R7900 before 1.0.4.30, R8000 before 1.0.4.62, RS400 before 1.5.1.80, R6400v2 before 1.0.4.102, R7000P before 1.3.2.126, R6700v3 before 1.0.4.102, and R6900P before 1.3.2.126.
The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to compute password-of-the-day values via unspecified vectors.
The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not include the HTTPOnly flag in a Set-Cookie header for administration applications, which makes it easier for remote attackers to obtain potentially sensitive information via script access to cookies.
Microsoft SQL Server Analysis Services in Microsoft SQL Server 2012, Microsoft SQL Server 2014, and Microsoft SQL Server 2016 allows an information disclosure vulnerability when it improperly enforces permissions, aka "Microsoft SQL Server Analysis Services Information Disclosure Vulnerability".
The login function in Softaculous Webuzo before 2.1.4 provides different error messages for invalid authentication attempts depending on whether the user account exists, which allows remote attackers to enumerate usernames via a series of requests.
The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST) and DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to discover a CM MAC address by sniffing Wi-Fi traffic and performing simple arithmetic calculations.
The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not set the secure flag for cookies in an https session to an administration application, which makes it easier for remote attackers to capture these cookies by intercepting their transmission within an http session.
IDM 4.6 Identity Applications prior to 4.6.2.1 may expose sensitive information.
Emerson Dixell XWEB-500 products are affected by information disclosure via directory listing. A potential attacker can use this misconfiguration to access all the files in the remote directories. Note: the product has not been supported since 2018 and should be removed or replaced
The Google News and Weather application before 3.3.1 for Android allows remote attackers to read OAuth tokens by sniffing the network and leveraging the lack of SSL.
A Remote Disclosure of Information vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P2 was found.
Karotz API 12.07.19.00: Session Token Information Disclosure
Certain NETGEAR devices are affected by disclosure of sensitive information. This affects RBK50 before 2.7.3.22, RBR50 before 2.7.3.22, and RBS50 before 2.7.3.22.
Limited plaintext disclosure exists in PRIMX Zed Entreprise for Windows before 6.1.2240, Zed Entreprise for Windows (ANSSI qualification submission) before 6.1.2150, Zed Entreprise for Mac before 2.0.199, Zed Entreprise for Linux before 2.0.199, Zed Pro for Windows before 1.0.195, Zed Pro for Mac before 1.0.199, Zed Pro for Linux before 1.0.199, Zed Free for Windows before 1.0.195, Zed Free for Mac before 1.0.199, and Zed Free for Linux before 1.0.199. Analyzing a Zed container can lead to the disclosure of plaintext content of very small files (a few bytes) stored into it.
NETGEAR R7000 devices before 1.0.11.116 are affected by disclosure of sensitive information.
Some NetIQ Identity Manager Applications before Identity Manager 4.5.6.1 included the session token in GET URLs, potentially allowing exposure of user sessions to untrusted third parties via proxies, referer urls or similar.
A remote unauthenticated disclosure of information vulnerability in HPE Matrix Operating Environment version 7.6 LR1 was found.
Certain NETGEAR devices are affected by disclosure of sensitive information. This affects RBK352 before 4.4.0.10, RBR350 before 4.4.0.10, and RBS350 before 4.4.0.10.
An information disclosure vulnerability in the BlackBerry Workspaces Server could result in an attacker gaining access to source code for server-side applications by crafting a request for specific files.
X-Pack 5.1.1 did not properly apply document and field level security to multi-search and multi-get requests so users without access to a document and/or field may have been able to access this information.
An information-leakage issue was discovered on Mimosa Client Radios before 2.2.3 and Mimosa Backhaul Radios before 2.2.3. There is a page in the web interface that will show you the device's serial number, regardless of whether or not you have logged in. This information-leakage issue is relevant because there is another page (accessible without any authentication) that allows you to remotely factory reset the device simply by entering the serial number.
Debug information disclosure exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. A direct request to cgi-bin/HASync/hasync.cgi?debug=1 shows Master LAN Address, Serial Number, HA Group ID, Virtual IP, and Submitted syncid.
In Cloud Foundry Foundation CAPI-release versions after v1.6.0 and prior to v1.38.0 and cf-release versions after v244 and prior to v270, there is an incomplete fix for CVE-2017-8035. If you took steps to remediate CVE-2017-8035 you should also upgrade to fix this CVE. A carefully crafted CAPI request from a Space Developer can allow them to gain access to files on the Cloud Controller VM for that installation, aka an Information Leak / Disclosure.
QNAP QTS 4.2.6 build 20171026, QTS 4.3.3 build 20170727 and earlier allows remote attackers to obtain potentially sensitive information (firmware version and running services) via a request to sysinfoReq.cgi.
Same-origin policy protections can be bypassed on pages with embedded iframes during page reloads, allowing the iframes to access content on the top level page, leading to information disclosure. This vulnerability affects Thunderbird < 52.3, Firefox ESR < 52.3, and Firefox < 55.
In Joomla! 3.4.0 through 3.6.5 (fixed in 3.7.0), multiple files caused full path disclosures on systems with enabled error reporting.
NetApp OnCommand Unified Manager Core Package 5.x before 5.2.2P1 might allow remote attackers to obtain sensitive information via vectors involving error messages.
QNAP Qfinder Pro 6.1.0.0317 and earlier may expose sensitive information contained in NAS devices. If exploited, this may allow attackers to further compromise the device.
Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects RAX35 before 1.0.4.102, RAX38 before 1.0.4.102, and RAX40 before 1.0.4.102.
Certain NETGEAR devices are affected by disclosure of sensitive information. This affects RBK352 before 4.4.0.10, RBR350 before 4.4.0.10, and RBS350 before 4.4.0.10.
Schneider Electric Modicon TM221CE16R 1.3.3.3 devices allow remote attackers to discover the application-protection password via a \x00\x01\x00\x00\x00\x05\x01\x5a\x00\x03\x00 request to the Modbus port (502/tcp). Subsequently the application may be arbitrarily downloaded, modified, and uploaded.
Atlassian Confluence 6.x before 6.0.7 allows remote attackers to bypass authentication and read any blog or page via the drafts diff REST resource.