Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Web Authentication (WebAuth) clients for the Cisco Wireless LAN Controller (WLC) and Aironet Access Points running Cisco IOS Software could allow an unauthenticated, adjacent attacker to bypass authentication and pass traffic. The vulnerability is due to incorrect implementation of authentication for WebAuth clients in a specific configuration. An attacker could exploit this vulnerability by sending traffic to local network resources without having gone through authentication. A successful exploit could allow the attacker to bypass authentication and pass traffic. This affects Cisco Aironet Access Points running Cisco IOS Software and Cisco Wireless LAN Controller (WLC) releases prior to 8.5.110.0 for the following specific WLC configuration only: (1) The Access Point (AP) is configured in FlexConnect Mode with NAT. (2) The WLAN is configured for central switching, meaning the client is being assigned a unique IP address. (3) The AP is configured with a Split Tunnel access control list (ACL) for access to local network resources, meaning the AP is doing the NAT on the connection. (4) The client is using WebAuth. This vulnerability does not apply to .1x clients in the same configuration. Cisco Bug IDs: CSCvc79502, CSCvf71789.

A vulnerability in the FTP server of the Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to log in to the FTP server of the device without a valid password. The attacker does need to have a valid username. The vulnerability is due to incorrect FTP user credential validation. An attacker could exploit this vulnerability by using FTP to connect to the management IP address of the targeted device. A successful exploit could allow the attacker to log in to the FTP server of the Cisco WSA without having a valid password. This vulnerability affects Cisco AsyncOS for WSA Software on both virtual and hardware appliances that are running any release of Cisco AsyncOS 10.5.1 for WSA Software. The device is vulnerable only if FTP is enabled on the management interface. FTP is disabled by default. Cisco Bug IDs: CSCvf74281.

A vulnerability in the session identification management functionality of the web-based interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to hijack a valid user session on an affected system. The vulnerability exists because the affected software does not properly clear previously assigned session identifiers for a user session when a user authenticates to the web-based interface. An attacker could exploit this vulnerability by using an existing session identifier to connect to the software through the web-based interface. Successful exploitation could allow the attacker to hijack an authenticated user's browser session on the system. Versions 8.1 and 8.5 are affected.

A vulnerability in the password recovery function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password recovery request. An attacker could exploit this vulnerability by submitting a password recovery request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07253.

A vulnerability in the role-based resource checking functionality of the Cisco Unified Computing System (UCS) Director could allow an authenticated, remote attacker to view unauthorized information for any virtual machine in the UCS Director end-user portal and perform any permitted operations on any virtual machine. The permitted operations can be configured for the end user on the virtual machines with either of the following settings: The virtual machine is associated to a Virtual Data Center (VDC) that has an end user self-service policy attached to the VDC. The end user role has VM Management Actions settings configured under User Permissions. This is a global configuration, so all the virtual machines visible in the end-user portal will have the VM management actions available. The vulnerability is due to improper user authentication checks. An attacker could exploit this vulnerability by logging in to the UCS Director with a modified username and valid password. A successful exploit could allow the attacker to gain visibility into and perform actions against all virtual machines in the UCS Director end-user portal of the affected system. This vulnerability affects Cisco Unified Computing System (UCS) Director releases 6.0 and 6.5 prior to patch 3 that are in a default configuration. Cisco Bug IDs: CSCvh53501.

A vulnerability in the Cisco Umbrella API could allow an authenticated, remote attacker to view and modify data across their organization and other organizations. The vulnerability is due to insufficient authentication configurations for the API interface of Cisco Umbrella. An attacker could exploit this vulnerability to view and potentially modify data for their organization or other organizations. A successful exploit could allow the attacker to read or modify data across multiple organizations.

A vulnerability in the password reset function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password reset request. An attacker could exploit this vulnerability by submitting a password reset request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07245.

A vulnerability in the RADIUS authentication module of Cisco Policy Suite could allow an unauthenticated, remote attacker to be authorized as a subscriber without providing a valid password; however, the attacker must provide a valid username. The vulnerability is due to incorrect RADIUS user credential validation. An attacker could exploit this vulnerability by attempting to access a Cisco Policy Suite domain configured with RADIUS authentication. An exploit could allow the attacker to be authorized as a subscriber without providing a valid password. This vulnerability affects the Cisco Policy Suite application running a release prior to 13.1.0 with Hotfix Patch 1 when RADIUS authentication is configured for a domain. Cisco Policy Suite Release 14.0.0 is also affected, as it includes vulnerable code, but RADIUS authentication is not officially supported in Cisco Policy Suite Releases 14.0.0 and later. Cisco Bug IDs: CSCvg40124.

The SSL VPN implementation in Cisco Adaptive Security Appliance (ASA) Software 8.2 before 8.2(5.47, 8.3 before 8.3(2.40), 8.4 before 8.4(7.3), 8.6 before 8.6(1.13), 9.0 before 9.0(3.8), and 9.1 before 9.1(3.2) allows remote attackers to bypass authentication via (1) a crafted cookie value within modified HTTP POST data or (2) a crafted URL, aka Bug ID CSCua85555.

The Real Time Monitoring Tool (RTMT) web application in Cisco Unified Communications Manager (Unified CM) 10.0(1) and earlier does not properly enforce authentication requirements, which allows remote attackers to read application files via a direct request to a URL, aka Bug ID CSCum46495.

The Cisco Unified IP Phone 7960G 9.2(1) and earlier allows remote attackers to bypass authentication and change trust relationships by injecting a Certificate Trust List (CTL) file, aka Bug ID CSCuj66795.

A vulnerability in the web application in the Cisco Prime Collaboration Provisioning tool could allow an unauthenticated, remote attacker to hijack another user's session. More Information: CSCvc90346. Known Affected Releases: 12.1.

A vulnerability in Cisco IOS 15.5(3)M Software for Cisco CallManager Express (CME) could allow an unauthenticated, remote attacker to make unauthorized phone calls. The vulnerability is due to a configuration restriction in the toll-fraud protections component of the affected software. An attacker could exploit this vulnerability to place unauthorized, long-distance phone calls by using an affected system. Cisco Bug IDs: CSCuy40939.

A vulnerability in the authentication functionality of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to bypass authentication controls and log in to the device through the management interface This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and log in to the device as an administrator. The attacker could obtain privileges that are the same level as an administrative user but it depends on the crafted credentials. Note: This vulnerability exists because of a non-default device configuration that must be present for it to be exploitable. For details about the vulnerable configuration, see the Vulnerable Products section of this advisory.

A vulnerability in the IPSec VPN Server authentication functionality of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to bypass authentication controls and access the IPSec VPN network. This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to the VPN from an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and access the IPSec VPN network. The attacker may obtain privileges that are the same level as an administrative user, depending on the crafted credentials that are used. Cisco has not released software updates that address this vulnerability.

A vulnerability in the smart card login authentication of Cisco Duo for macOS could allow an unauthenticated attacker with physical access to bypass authentication. This vulnerability exists because the assigned user of a smart card is not properly matched with the authenticating user. An attacker could exploit this vulnerability by configuring a smart card login to bypass Duo authentication. A successful exploit could allow the attacker to use any personal identity verification (PIV) smart card for authentication, even if the smart card is not assigned to the authenticating user.

A vulnerability in the CLI of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated to access the CLI. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the API subsystem of Cisco Meetings App could allow an unauthenticated, remote attacker to retain and reuse the Traversal Using Relay NAT (TURN) server credentials that are configured in an affected system. The vulnerability is due to insufficient protection mechanisms for the TURN server credentials. An attacker could exploit this vulnerability by intercepting the legitimate traffic that is generated by an affected system. An exploit could allow the attacker to obtain the TURN server credentials, which the attacker could use to place audio/video calls and forward packets through the configured TURN server. The attacker would not be able to take control of the TURN server unless the same credentials were used in multiple systems.

A vulnerability in the Common Access Card (CAC) authentication feature of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass authentication and access the FMC system. The attacker must have a valid CAC to initiate the access attempt. The vulnerability is due to incorrect session invalidation during CAC authentication. An attacker could exploit this vulnerability by performing a CAC-based authentication attempt to an affected system. A successful exploit could allow the attacker to access an affected system with the privileges of a CAC-authenticated user who is currently logged in.

A vulnerability in Cisco DNA Center software could allow an unauthenticated remote attacker access to sensitive information on an affected system. The vulnerability is due to improper handling of authentication tokens by the affected software. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker access to sensitive device information, which includes configuration files.

A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.

A vulnerability in the TCP Intercept functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured Access Control Policies (including Geolocation) and Service Polices on an affected system. The vulnerability exists because TCP Intercept is invoked when the embryonic connection limit is reached, which can cause the underlying detection engine to process the packet incorrectly. An attacker could exploit this vulnerability by sending a crafted stream of traffic that matches a policy on which TCP Intercept is configured. A successful exploit could allow the attacker to match on an incorrect policy, which could allow the traffic to be forwarded when it should be dropped. In addition, the traffic could incorrectly be dropped.

A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, physical attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by stopping the boot initialization of an affected device. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.

A vulnerability in the mesh code of Cisco Wireless LAN Controller (WLC) software could allow an unauthenticated, remote attacker to impersonate a WLC in a meshed topology. The vulnerability is due to insufficient authentication of the parent access point in a mesh configuration. An attacker could exploit this vulnerability by forcing the target system to disconnect from the correct parent access point and reconnect to a rogue access point owned by the attacker. An exploit could allow the attacker to control the traffic flowing through the impacted access point or take full control of the target system. This vulnerability affects the following products running a vulnerable version of Wireless LAN Controller software and configured for meshed mode: Cisco 8500 Series Wireless Controller, Cisco 5500 Series Wireless Controller, Cisco 2500 Series Wireless Controller, Cisco Flex 7500 Series Wireless Controller, Cisco Virtual Wireless Controller, Wireless Services Module 2 (WiSM2). Note that additional configuration is needed in addition to upgrading to a fixed release. Cisco Bug IDs: CSCuc98992 CSCuu14804.

A vulnerability in the CLI of Cisco Connected Mobile Experiences (CMX) could allow an authenticated, local attacker with administrative credentials to bypass restrictions on the CLI. The vulnerability is due to insufficient security mechanisms in the restricted shell implementation. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to escape the restricted shell and execute a set of normally unauthorized commands with the privileges of a non-root user. To exploit this vulnerability, an attacker would need to have valid administrative credentials.

Race condition in the Phone Proxy component in Cisco Adaptive Security Appliance (ASA) Software 9.1(.3) and earlier allows remote attackers to bypass sec_db authentication and provide certain pass-through services to untrusted devices via a crafted configuration-file TFTP request, aka Bug ID CSCuj66766.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

A vulnerability in the Border Gateway Protocol (BGP) Bidirectional Forwarding Detection (BFD) implementation of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to bypass the access control list (ACL) for specific TCP and UDP traffic. More Information: CSCvc68229. Known Affected Releases: 9.6(2). Known Fixed Releases: 99.1(20.1) 99.1(10.2) 98.1(12.7) 98.1(1.49) 97.1(6.58) 97.1(0.134) 96.2(0.109) 9.7(1.1) 9.6(2.99) 9.6(2.8).

The Disaster Recovery (DRA) feature on the Cisco ISB8320-E High-Definition IP-Only DVR allows remote attackers to bypass authentication by establishing a TELNET session during a recovery boot, aka Bug ID CSCup85422.

Cisco Video Surveillance Operations Manager (VSOM) does not require authentication for MySQL database connections, which allows remote attackers to obtain sensitive information, modify data, or cause a denial of service by leveraging network connectivity from a client system with a crafted host name, aka Bug ID CSCud10992.

A vulnerability in the login page of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to log in without credentials and access all roles without any restrictions. This vulnerability is due to exposed sensitive Security Assertion Markup Language (SAML) metadata. An attacker could exploit this vulnerability by using the exposed SAML metadata to bypass authentication to the user portal. A successful exploit could allow the attacker to access all roles without any restrictions.

A vulnerability in the external authentication functionality of Cisco Secure Email and Web Manager, formerly known as Cisco Security Management Appliance (SMA), and Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass authentication and log in to the web management interface of an affected device. This vulnerability is due to improper authentication checks when an affected device uses Lightweight Directory Access Protocol (LDAP) for external authentication. An attacker could exploit this vulnerability by entering a specific input on the login page of the affected device. A successful exploit could allow the attacker to gain unauthorized access to the web-based management interface of the affected device.

A vulnerability in the Simple Network Management Protocol (SNMP) access controls for Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module, Cisco Firepower Management Center (FMC) Software, and Cisco Next-Generation Intrusion Prevention System (NGIPS) Software could allow an unauthenticated, remote attacker to perform an SNMP GET request using a default credential. This vulnerability is due to the presence of a default credential for SNMP version 1 (SNMPv1) and SNMP version 2 (SNMPv2). An attacker could exploit this vulnerability by sending an SNMPv1 or SNMPv2 GET request to an affected device. A successful exploit could allow the attacker to retrieve sensitive information from the device using the default credential. This attack will only be successful if SNMP is configured, and the attacker can only perform SNMP GET requests; write access using SNMP is not allowed.

The VTY authentication implementation in Cisco IOS XE 03.02.xxSE and 03.03.xxSE incorrectly relies on the Linux-IOS internal-network configuration, which allows remote attackers to bypass authentication by leveraging access to a 192.168.x.2 source IP address, aka Bug ID CSCuj90227.

The play/modules component in Cisco WebEx Meetings Server allows remote attackers to obtain administrator access via crafted API requests, aka Bug ID CSCuj40421.

The remote-access VPN implementation in Cisco Adaptive Security Appliance (ASA) Software 7.x before 7.2(5.12), 8.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.6.x before 8.6(1.12), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.5), when an override-account-disable option is enabled, does not properly parse AAA LDAP responses, which allows remote attackers to bypass authentication via a VPN connection attempt, aka Bug ID CSCug83401.

Unspecified vulnerability in Cisco Unity 4.x before 4.2(1)ES161, 5.x before 5.0(1)ES53, and 7.x before 7.0(2)ES8, when using anonymous authentication (aka native Unity authentication), allows remote attackers to bypass authentication and read or modify system configuration parameters by going to a specific link more than once.

The Adaptive Security Device Management (ASDM) remote-management feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.6) does not properly implement the authentication-certificate option, which allows remote attackers to bypass authentication via a TCP session to an ASDM interface, aka Bug ID CSCuh44815.

The authentication manager process in the web framework in Cisco Intrusion Prevention System (IPS) does not properly handle user tokens, which allows remote attackers to cause a denial of service (intermittent MainApp hang) via a crafted management-interface connection request, aka Bug ID CSCuf20148.

Cisco Video Surveillance Manager (VSM) before 7.0.0 allows remote attackers to obtain sensitive configuration, archive, and log information via unspecified vectors, related to the Cisco_VSBWT (aka Broadware sample code) package, aka Bug ID CSCsv37288.

Cisco Video Surveillance Manager (VSM) before 7.0.0 does not require authentication for access to VSMC monitoring pages, which allows remote attackers to obtain sensitive configuration, archive, and log information via unspecified vectors, related to the Cisco_VSBWT (aka Broadware sample code) package, aka Bug ID CSCsv40169.

The EAP-FAST authentication module in Cisco Secure Access Control Server (ACS) 4.x before 4.2.1.15.11, when a RADIUS server configuration is enabled, does not properly parse user identities, which allows remote attackers to execute arbitrary commands via crafted EAP-FAST packets, aka Bug ID CSCui57636.

A vulnerability in the Cisco IOS XE Software REST API could allow an authenticated, remote attacker to bypass API authorization checks and use the API to perform privileged actions on an affected device. The vulnerability is due to insufficient authorization checks for requests that are sent to the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious request to an affected device via the REST API. A successful exploit could allow the attacker to selectively bypass authorization checks for the REST API of the affected software and use the API to perform privileged actions on an affected device. Cisco Bug IDs: CSCuz56428.

Cisco Linksys E4200 1.0.05 Build 7 devices contain a Security Bypass Vulnerability which could allow remote attackers to gain unauthorized access.

A vulnerability in the 802.1x multiple-authentication (multi-auth) feature of Cisco IOS Software could allow an unauthenticated, adjacent attacker to bypass the authentication phase on an 802.1x multi-auth port. The vulnerability is due to a logic change error introduced into the code. An attacker could exploit this vulnerability by trying to access an 802.1x multi-auth port after a successful supplicant has authenticated. An exploit could allow the attacker to bypass the 802.1x access controls and obtain access to the network. Cisco Bug IDs: CSCvg69701.

The ISM module in Cisco IOS on ISR G2 routers does not properly handle authentication-header packets, which allows remote authenticated users to cause a denial of service (module reload) via a series of malformed packets, aka Bug ID CSCub92025.

The Location Bandwidth Manager (LBM) Intracluster-communication feature in Cisco Unified Communications Manager (CUCM) 9.x before 9.1(1) does not require authentication from the remote LBM Hub node, which allows remote attackers to conduct cache-poisoning attacks against transaction records, and cause a denial of service (bandwidth-pool consumption and call outage), via unspecified vectors, aka Bug ID CSCub28920.

The Real-Time Information Server (RIS) Data Collector service in Cisco Unified Communications Manager (CUCM) 5.x before 5.1(3) and 6.x before 6.1(1) allows remote attackers to bypass authentication, and obtain cluster configuration information and statistics, via a direct TCP connection to the service port, aka Bug ID CSCsj90843.