An issue was discovered on KONE Group Controller (KGC) devices before 4.6.5. Unauthenticated Remote Code Execution is possible through the open HTTP interface by modifying autoexec.bat, aka KONE-01.

Teltonika RUT9XX routers with firmware before 00.04.233 are prone to multiple unauthenticated OS command injection vulnerabilities in autologin.cgi and hotspotlogin.cgi due to insufficient user input sanitization. This allows remote attackers to execute arbitrary commands with root privileges.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/NTPSyncWithHost route. This could lead to command injection via shell metacharacters.

The application login page in AKIPS Network Monitor 15.37 through 16.5 allows a remote unauthenticated attacker to execute arbitrary OS commands via shell metacharacters in the username parameter (a failed login attempt returns the command-injection output to a limited login failure field). This is fixed in 16.6.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

LogonTracer 1.2.0 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

The web interface on FASTGate Fastweb devices with firmware through 0.00.47_FW_200_Askey 2017-05-17 (software through 1.0.1b) exposed a CGI binary that is vulnerable to a command injection vulnerability that can be exploited to achieve remote code execution with root privileges. No authentication is required in order to trigger the vulnerability.

The test connection functionality in the NetAudit section of Opsview Monitor before 5.3.1 and 5.4.x before 5.4.2 is vulnerable to command injection due to improper sanitization of the rancid_password parameter.

RICOH Interactive Whiteboard D2200 V1.6 to V2.2, D5500 V1.6 to V2.2, D5510 V1.6 to V2.2, and the display versions with RICOH Interactive Whiteboard Controller Type1 V1.6 to V2.2 attached (D5520, D6500, D6510, D7500, D8400) allows remote attackers to execute arbitrary commands via unspecified vectors.

An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ONVIF devicemgmt SetDNS method allows remote attackers to execute arbitrary OS commands via the IPv4Address field.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

System command injection in the /DroboPix/api/drobopix/demo endpoint on Drobo 5N2 NAS version 4.0.5-13.28.96115 allows unauthenticated attackers to execute system commands via the payload in a POST request.

The Python CGI scripts in PWS in Imperva SecureSphere 13.0.10, 13.1.10, and 13.2.10 allow remote attackers to execute arbitrary OS commands because command-line arguments are mishandled.

Western Digital WD My Book Live and WD My Book Live Duo (all versions) have a root Remote Command Execution bug via shell metacharacters in the /api/1.0/rest/language_configuration language parameter. It can be triggered by anyone who knows the IP address of the affected device, as exploited in the wild in June 2021 for factory reset commands,

Shell Metacharacter Injection in www/modules/save.php in FruityWifi (aka PatatasFritas/PatataWifi) through 2.4 allows remote attackers to execute arbitrary code with root privileges via a crafted mod_name parameter in a POST request. NOTE: unlike in CVE-2018-17317, the attacker does not need a valid session.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/Diagnosis route. This could lead to command injection via shell metacharacters in the sendNum parameter.

An issue was discovered on Tenda AC7 devices with firmware through V15.03.06.44_CN(AC7), AC9 devices with firmware through V15.03.05.19(6318)_CN(AC9), and AC10 devices with firmware through V15.03.06.23_CN(AC10). A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted goform/setUsbUnload request. This occurs because the "formsetUsbUnload" function executes a dosystemCmd function with untrusted input.

An unvalidated REST API in the AppFormix Agent of Juniper Networks AppFormix allows an unauthenticated remote attacker to execute commands as root on the host running the AppFormix Agent, when certain preconditions are performed by the attacker, thus granting the attacker full control over the environment. This issue affects: Juniper Networks AppFormix 3 versions prior to 3.1.22, 3.2.14, 3.3.0.

upgrade_handle.php on NUUO NVRmini devices allows Remote Command Execution via shell metacharacters in the uploaddir parameter for a writeuploaddir command.

ELTEX NTP-RG-1402G 1v10 3.25.3.32 devices allow OS command injection via the PING field of the resource ping.cmd. The NTP-2 device is also affected.

System command injection in formAliasIp in TOTOLINK A3002RU version 1.0.8 allows attackers to execute system commands via the "subnet" POST parameter.

The Web Console in Commvault Edge Server 10 R2 allows remote attackers to execute arbitrary OS commands via crafted serialized data in a cookie.

Multiple ZyXEL network-attached storage (NAS) devices running firmware version 5.21 contain a pre-authentication command injection vulnerability, which may allow a remote, unauthenticated attacker to execute arbitrary code on a vulnerable device. ZyXEL NAS devices achieve authentication by using the weblogin.cgi CGI executable. This program fails to properly sanitize the username parameter that is passed to it. If the username parameter contains certain characters, it can allow command injection with the privileges of the web server that runs on the ZyXEL device. Although the web server does not run as the root user, ZyXEL devices include a setuid utility that can be leveraged to run any command with root privileges. As such, it should be assumed that exploitation of this vulnerability can lead to remote code execution with root privileges. By sending a specially-crafted HTTP POST or GET request to a vulnerable ZyXEL device, a remote, unauthenticated attacker may be able to execute arbitrary code on the device. This may happen by directly connecting to a device if it is directly exposed to an attacker. However, there are ways to trigger such crafted requests even if an attacker does not have direct connectivity to a vulnerable devices. For example, simply visiting a website can result in the compromise of any ZyXEL device that is reachable from the client system. Affected products include: NAS326 before firmware V5.21(AAZF.7)C0 NAS520 before firmware V5.21(AASZ.3)C0 NAS540 before firmware V5.21(AATB.4)C0 NAS542 before firmware V5.21(ABAG.4)C0 ZyXEL has made firmware updates available for NAS326, NAS520, NAS540, and NAS542 devices. Affected models that are end-of-support: NSA210, NSA220, NSA220+, NSA221, NSA310, NSA310S, NSA320, NSA320S, NSA325 and NSA325v2

Shell Metacharacter Injection in the SSH configuration interface on Grandstream GXP16xx VoIP 1.0.4.128 phones allows attackers to execute arbitrary system commands and gain a root shell.

ELTEX NTP-RG-1402G 1v10 3.25.3.32 devices allow OS command injection via the TRACE field of the resource ping.cmd. The NTP-2 device is also affected.

TimeTools SC7105 1.0.007, SC9205 1.0.007, SC9705 1.0.007, SR7110 1.0.007, SR9210 1.0.007, SR9750 1.0.007, SR9850 1.0.007, T100 1.0.003, T300 1.0.003, and T550 1.0.003 devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the t3.cgi srmodel or srtime parameter.

DrayTek Vigor2960 1.3.1_Beta, Vigor3900 1.4.4_Beta, and Vigor300B 1.3.3_Beta, 1.4.2.1_Beta, and 1.4.4_Beta devices allow remote code execution as root (without authentication) via shell metacharacters to the cgi-bin/mainfunction.cgi URI. This issue has been fixed in Vigor3900/2960/300B v1.5.1.

Post Oak AWAM Bluetooth Field Device 7400v2.08.21.2018, 7800SD.2015.1.16, 2011.3, 7400v2.02.01.2019, and 7800SD.2012.12.5 is vulnerable to injections of operating system commands through timeconfig.py via shell metacharacters in the htmlNtpServer parameter.

Iteris Vantage Velocity Field Unit 2.3.1, 2.4.2, and 3.0 devices allow the injection of OS commands into cgi-bin/timeconfig.py via shell metacharacters in the NTP Server field.

System command injection in formDlna in TOTOLINK A3002RU version 1.0.8 allows attackers to execute system commands via the "sambaUser" POST parameter.

A vulnerability exists that could allow the execution of operating system commands on systems running MiPlatform 2019.05.16 and earlier. An attacker could execute arbitrary remote command by sending parameters to WinExec function in ExtCommandApi.dll module of MiPlatform.

OS command injection in the AP mode settings feature in /cgi-bin/luci /api/misystem/set_router_wifiap on Xiaomi R3D before 2.26.4 devices allows an attacker to execute any command via crafted JSON data.

An issue was discovered on KT Slim egg IML500 (R7283, R8112, R8424) and IML520 (R8112, R8368, R8411) wifi device. This issue is a command injection allowing attackers to execute arbitrary OS commands.

Insufficient input validation in npm package `jison` <= 0.4.18 may lead to OS command injection attacks.

In BIG-IQ 6.0.0-7.0.0, a remote access vulnerability has been discovered that may allow a remote user to execute shell commands on affected systems using HTTP requests to the BIG-IQ user interface.

D-Link DCH-M225 1.05b01 and earlier devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the spotifyConnect.php userName parameter.

Schmid ZI 620 V400 VPN 090 routers allow an attacker to execute OS commands as root via shell metacharacters to an entry on the SSH subcommand menu, as demonstrated by ping.

SV3C L-SERIES HD CAMERA V2.3.4.2103-S50-NTD-B20170508B and V2.3.4.2103-S50-NTD-B20170823B devices allow OS Command Injection.

The Data Protection extension in the VMware GUI in IBM Tivoli Storage Manager for Virtual Environments: Data Protection for VMware (aka Spectrum Protect for Virtual Environments) 7.1 before 7.1.3.0 and Tivoli Storage FlashCopy Manager for VMware (aka Spectrum Protect Snapshot) 4.1 before 4.1.3.0 allows remote attackers to execute arbitrary OS commands via unspecified vectors.

VTech Storio Max before 56.D3JM6 allows remote command execution via shell metacharacters in an Android activity name. It exposes the storeintenttranslate.x service on port 1668 listening for requests on localhost. Requests submitted to this service are checked for a string of random characters followed by the name of an Android activity to start. Activities are started by inserting their name into a string that is executed in a shell command. By inserting metacharacters this can be exploited to run arbitrary commands as root. The requests also match those of the HTTP protocol and can be triggered on any web page rendered on the device by requesting resources stored at an http://127.0.0.1:1668/ URI, as demonstrated by the http://127.0.0.1:1668/dacdb70556479813fab2d92896596eef?';{ping,example.org}' URL.

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via HTTP. An authenticated remote attacker can bypass command injection mitigations and execute commands as the root user by sending a crafted HTTP POST to the UCM's "New" HTTPS API.

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via SSH. An authenticated remote attacker can execute commands as the root user by issuing a specially crafted "unset" command.

UNIVERGE SV9500 series from V1 to V7and SV8500 series from S6 to S8 allows an attacker to execute arbitrary OS commands or cause a denial-of-service (DoS) condition by sending a specially crafted request to a specific URL.

A command injection vulnerability in libnmapp package for versions <0.4.16 allows arbitrary commands to be executed via arguments to the range options.

A command injection vulnerability in the apex-publish-static-files npm module version <2.0.1 which allows arbitrary shell command execution through a maliciously crafted argument.

Keijiban Tsumiki v1.15 allows remote attackers to execute arbitrary OS commands via unspecified vectors.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. This vulnerability is due to an incomplete fix for CVE-2020-4211. IBM X-Force ID: 181724.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175022.