Multiple SSH2 servers and clients do not properly handle packets or data elements with incorrect length specifiers, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.

Multiple buffer overflows in the authentication functionality in the web-server module in Cisco CiscoWorks Common Services before 4.0 allow remote attackers to execute arbitrary code via a session on TCP port (1) 443 or (2) 1741, aka Bug ID CSCti41352.

Multiple stack-based buffer overflows in agent.exe in Setup Manager in Cisco Intelligent Contact Manager (ICM) before 7.0 allow remote attackers to execute arbitrary code via a long parameter in a (1) HandleUpgradeAll, (2) AgentUpgrade, (3) HandleQueryNodeInfoReq, or (4) HandleUpgradeTrace TCP packet, aka Bug IDs CSCti45698, CSCti45715, CSCti45726, and CSCti46164.

Buffer overflow in Cisco CiscoWorks Internetwork Performance Monitor (IPM) 2.6 and earlier on Windows, as distributed in CiscoWorks LAN Management Solution (LMS), allows remote attackers to execute arbitrary code via a malformed getProcessName CORBA General Inter-ORB Protocol (GIOP) request, related to a "third-party component," aka Bug ID CSCsv62350.

Buffer overflow on Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allows remote attackers to have an unspecified impact via long IKE attributes, aka Bug ID CSCsu43121.

Buffer overflow in Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SCCP and SIP firmware might allow remote attackers to execute arbitrary code via a crafted DNS response.

Multiple buffer overflows in securecgi-bin/CSuserCGI.exe in User-Changeable Password (UCP) before 4.2 in Cisco Secure Access Control Server (ACS) for Windows and ACS Solution Engine allow remote attackers to execute arbitrary code via a long argument located immediately after the Logout argument, and possibly unspecified other vectors.

The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device. Cisco has not released software updates that address this vulnerability.

Buffer overflow in the Centralized TFTP File Locator Service in Cisco Unified Communications Manager (CUCM, formerly CallManager) 5.1 before 5.1(3), and Unified CallManager 5.0, allows remote attackers to execute arbitrary code or cause a denial of service via unspecified vectors involving the processing of filenames, aka CSCsh47712.

Multiple vulnerabilities in the web management interface of Cisco Small Business 220 Series Smart Switches could allow an unauthenticated, remote attacker to overflow a buffer, which then allows the execution of arbitrary code with root privileges on the underlying operating system. The vulnerabilities are due to insufficient validation of user-supplied input and improper boundary checks when reading data into an internal buffer. An attacker could exploit these vulnerabilities by sending malicious requests to the web management interface of an affected device. Depending on the configuration of the affected switch, the malicious requests must be sent via HTTP or HTTPS.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user. RV110W Wireless-N VPN Firewall versions prior to 1.2.2.1 are affected. RV130W Wireless-N Multifunction VPN Router versions prior to 1.0.3.45 are affected. RV215W Wireless-N VPN Router versions prior to 1.3.1.1 are affected.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device.

Multiple vulnerabilities in the API subsystem of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to execute arbitrary code with root privileges. The vulnerabilities are due to improper boundary checks for certain user-supplied input. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the API subsystem of an affected system. When this request is processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the underlying operating system (OS).

A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to information that they are not authorized to access, make changes to the system that they are not authorized to make, and execute commands on an affected system with privileges of the root user.

Multiple vulnerabilities in Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker or an authenticated, local attacker to execute arbitrary code on an affected system or cause an affected system to crash and reload. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Cisco Meeting Server and Meeting App could allow an unauthenticated, remote attacker to execute arbitrary code on an affected system. This vulnerability affects the following products: Cisco Meeting Server releases prior to 2.0.1, Acano Server releases prior to 1.8.16 and prior to 1.9.3, Cisco Meeting App releases prior to 1.9.8, Acano Meeting Apps releases prior to 1.8.35. More Information: CSCva75942 CSCvb67878. Known Affected Releases: 1.81.92.0.

A vulnerability in the Session Description Protocol (SDP) parser of Cisco Meeting Server could allow an unauthenticated, remote attacker to execute arbitrary code on an affected system. This vulnerability affects the following products: Cisco Meeting Server releases prior to Release 2.0.3, Acano Server releases 1.9.x prior to Release 1.9.5, Acano Server releases 1.8.x prior to Release 1.8.17. More Information: CSCva76004. Known Affected Releases: 1.8.x 1.92.0.

A vulnerability in the Transaction Language 1 (TL1) code of Cisco ASR 900 Series routers could allow an unauthenticated, remote attacker to cause a reload of, or remotely execute code on, the affected system. This vulnerability affects Cisco ASR 900 Series Aggregation Services Routers (ASR902, ASR903, and ASR907) that are running the following releases of Cisco IOS XE Software: 3.17.0S 3.17.1S 3.17.2S 3.18.0S 3.18.1S. More Information: CSCuy15175. Known Affected Releases: 15.6(1)S 15.6(2)S. Known Fixed Releases: 15.6(1)S2.12 15.6(1.17)S0.41 15.6(1.17)SP 15.6(2)SP 16.4(0.183) 16.5(0.10).

A vulnerability in the web-based management interface of Cisco RV110W Wireless-N VPN Firewall and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input data by the web-based management interface. An attacker could exploit this vulnerability by sending crafted requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user.

Buffer overflow in the Overlay Transport Virtualization (OTV) GRE feature in Cisco NX-OS 5.0 through 7.3 on Nexus 7000 and 7700 devices allows remote attackers to execute arbitrary code via long parameters in a packet header, aka Bug ID CSCuy95701.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to craft a packet to the management interface on an affected system, causing a buffer overflow. The vulnerability is due to incorrect input validation in the authentication module of the NX-API subsystem. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS packet to the management interface of an affected system with the NX-API feature enabled. An exploit could allow the attacker to execute arbitrary code as root. Note: NX-API is disabled by default. This vulnerability affects: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd45804, CSCve02322, CSCve02412.

Buffer overflow in the web server on Cisco DPC2203 and EPC2203 devices with firmware r1_customer_image allows remote attackers to execute arbitrary code via a crafted HTTP request, aka Bug ID CSCuv05935.

Buffer overflow in the IKEv1 and IKEv2 implementations in Cisco ASA Software before 8.4(7.30), 8.7 before 8.7(1.18), 9.0 before 9.0(4.38), 9.1 before 9.1(7), 9.2 before 9.2(4.5), 9.3 before 9.3(3.7), 9.4 before 9.4(2.4), and 9.5 before 9.5(2.2) on ASA 5500 devices, ASA 5500-X devices, ASA Services Module for Cisco Catalyst 6500 and Cisco 7600 devices, ASA 1000V devices, Adaptive Security Virtual Appliance (aka ASAv), Firepower 9300 ASA Security Module, and ISA 3000 devices allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via crafted UDP packets, aka Bug IDs CSCux29978 and CSCux42019.

Heap-based buffer overflow in Cisco TelePresence TC Software 4.x through 6.x before 6.0.1 and TE Software 4.x and 6.0.x before 6.0.2 allows remote attackers to execute arbitrary code via crafted SIP packets, aka Bug ID CSCud81796.

Buffer overflow in the Intelligent Platform Management Interface (IPMI) functionality in the Manager component in Cisco Unified Computing System (UCS) 1.0 and 1.1 before 1.1(1j) and 1.2 before 1.2(1b) allows remote attackers to execute arbitrary code via malformed data in a UDP packet, aka Bug ID CSCtd32371.

A vulnerability in the Cisco Fabric Services (CFS) component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69943, CSCve02429, CSCve02433, CSCve02435, CSCve02445, CSCve04859.

Buffer overflow in the telnet server in Cisco Unified IP Phone 7906G, 7911G, 7941G, 7961G, 7970G, and 7971G running SCCP firmware might allow remote authenticated users to execute arbitrary code via a crafted command.

Buffer overflow in Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SIP firmware might allow remote attackers to execute arbitrary code via a SIP message with crafted MIME data.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code or cause a DoS condition on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69962, CSCve02808, CSCve02810, CSCve02812, CSCve02819, CSCve02822, CSCve02831, CSCve04859.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code or cause a DoS condition. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69954, CSCve02463, CSCve02785, CSCve02787, CSCve02804, CSCve04859.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Heap-based buffer overflow in the Certificate Trust List (CTL) Provider service (CTLProvider.exe) in Cisco Unified Communications Manager (CUCM) 4.2 before 4.2(3)SR3 and 4.3 before 4.3(1)SR1, and CallManager 4.0 and 4.1 before 4.1(3)SR5c, allows remote attackers to cause a denial of service or execute arbitrary code via a long request.

Buffer overflow in a certain driver in Cisco Security Agent 4.5.1 before 4.5.1.672, 5.0 before 5.0.0.225, 5.1 before 5.1.0.106, and 5.2 before 5.2.0.238 on Windows allows remote attackers to execute arbitrary code via a crafted SMB packet in a TCP session on port (1) 139 or (2) 445.

A vulnerability in the Data-in-Motion (DMo) process installed with the Cisco IOx application environment could allow an unauthenticated, remote attacker to cause a stack overflow that could allow remote code execution with root privileges in the virtual instance running on an affected device. The vulnerability is due to insufficient bounds checking in the DMo process. An attacker could exploit this vulnerability by sending crafted packets that are forwarded to the DMo process for evaluation. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. This vulnerability affects the following Cisco 800 Series Industrial Integrated Services Routers: Cisco IR809 and Cisco IR829. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52330.

A vulnerability in the quality of service (QoS) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges. The vulnerability is due to incorrect bounds checking of certain values in packets that are destined for UDP port 18999 of an affected device. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code on the affected device with elevated privileges. The attacker could also leverage this vulnerability to cause the device to reload, causing a temporary DoS condition while the device is reloading. The malicious packets must be destined to and processed by an affected device. Traffic transiting a device will not trigger the vulnerability. Cisco Bug IDs: CSCvf73881.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker or an authenticated, local attacker to execute arbitrary code on an affected system or cause an affected system to crash and reload. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco IOS 9.x, 10.x, 11.x, and 12.x and IOS XR 2.0.x, 3.0.x, and 3.2.x allows remote attackers to cause a denial of service or execute arbitrary code via a crafted IP option in the IP header in a (1) ICMP, (2) PIMv2, (3) PGM, or (4) URD packet.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to obtain root access to the Network Processor (NP) Linux system by enabling a TELNET daemon (through CVE-2017-9479 exploitation) and then establishing a TELNET session.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to execute arbitrary commands as root by leveraging local network access and connecting to the syseventd server, as demonstrated by copying configuration data into a readable filesystem.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows Network Processor (NP) Linux users to obtain root access to the Application Processor (AP) Linux system via shell metacharacters in commands.

Directory traversal vulnerability in processImageSave.jsp in DCNM-SAN Server in Cisco Prime Data Center Network Manager (DCNM) before 6.2(1) allows remote attackers to write arbitrary files via the chartid parameter, aka Bug IDs CSCue77035 and CSCue77036. NOTE: this can be leveraged to execute arbitrary commands by using the JBoss autodeploy functionality.

Cisco Clean Access (CCA) 3.6.x through 3.6.4.2 and 4.0.x through 4.0.3.2 does not properly configure or allow modification of a shared secret authentication key, which causes all devices to have the same shared sercet and allows remote attackers to gain unauthorized access.

A vulnerability in the web interface for Cisco Prime Collaboration Provisioning could allow an unauthenticated, remote attacker to bypass authentication and perform command injection with root privileges. The vulnerability is due to missing security constraints in certain HTTP request methods, which could allow access to files via the web interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the targeted application. This vulnerability affects Cisco Prime Collaboration Provisioning Software Releases prior to 12.1. Cisco Bug IDs: CSCvc98724.

A vulnerability in Cisco Prime Data Center Network Manager (DCNM) Software could allow an unauthenticated, remote attacker to log in to the administrative console of a DCNM server by using an account that has a default, static password. The account could be granted root- or system-level privileges. The vulnerability exists because the affected software has a default user account that has a default, static password. The user account is created automatically when the software is installed. An attacker could exploit this vulnerability by connecting remotely to an affected system and logging in to the affected software by using the credentials for this default user account. A successful exploit could allow the attacker to use this default user account to log in to the affected software and gain access to the administrative console of a DCNM server. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software releases prior to Release 10.2(1) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd95346.