Cisco Cloud Services Platform (CSP) 2100 2.0 allows remote attackers to execute arbitrary code via a crafted dnslookup command in an HTTP request, aka Bug ID CSCuz89093.
The web server on Cisco DPC3010, DPC3212, DPC3825, DPC3925, DPQ3925, EPC3010, EPC3212, EPC3825, and EPC3925 Wireless Residential Gateway products allows remote attackers to execute arbitrary code via a crafted HTTP request, aka Bug ID CSCup40808.
The Cisco Unified SIP Phone 3905 with firmware before 9.4(1) allows remote attackers to obtain root access via a session on the test interface on TCP port 7870, aka Bug ID CSCuh75574.
The web interface in Cisco Secure Access Control System (ACS) 5.x before 5.4 Patch 3 allows remote attackers to execute arbitrary operating-system commands via a request to this interface, aka Bug ID CSCue65962.
The web management interface on the Cisco RV110W firewall with firmware 1.2.0.9 and earlier, RV215W router with firmware 1.1.0.5 and earlier, and CVR100W router with firmware 1.0.1.19 and earlier does not prevent replaying of modified authentication requests, which allows remote attackers to obtain administrative access by leveraging the ability to intercept requests, aka Bug IDs CSCul94527, CSCum86264, and CSCum86275.
Buffer overflow in CiscoSecure ACS Server 2.4(2) and earlier allows remote attackers to cause a denial of service and possibly execute arbitrary commands via a large TACACS+ packet.
Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access
Directory traversal vulnerability in processImageSave.jsp in DCNM-SAN Server in Cisco Prime Data Center Network Manager (DCNM) before 6.2(1) allows remote attackers to write arbitrary files via the chartid parameter, aka Bug IDs CSCue77035 and CSCue77036. NOTE: this can be leveraged to execute arbitrary commands by using the JBoss autodeploy functionality.
Cisco Unified Communications Domain Manager (CDM) in Unified CDM Platform Software before 4.4.2 has a hardcoded SSH private key, which makes it easier for remote attackers to obtain access to the support and root accounts by extracting this key from a binary file found in a different installation of the product, aka Bug ID CSCud41130.
Cisco Wireless LAN Controller (WLC) devices 7.4 before 7.4.110.0 distribute Aironet IOS software with a race condition in the status of the administrative HTTP server, which allows remote attackers to bypass intended access restrictions by connecting to an Aironet access point on which this server had been disabled ineffectively, aka Bug ID CSCuf66202.
The Cisco WAP4410N access point with firmware through 2.0.6.1, WRVS4400N router with firmware 1.x through 1.1.13 and 2.x through 2.0.2.1, and RVS4000 router with firmware through 2.0.3.2 allow remote attackers to read credential and configuration data, and execute arbitrary commands, via requests to the test interface on TCP port 32764, aka Bug IDs CSCum37566, CSCum43693, CSCum43700, and CSCum43685.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Virtual Network Computing (VNC) console implementation of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to access the VNC console session of an administrative user on an affected device. The vulnerability is due to an insufficient authentication mechanism used to establish a VNC session. An attacker could exploit this vulnerability by intercepting an administrator VNC session request prior to login. A successful exploit could allow the attacker to watch the administrator console session or interact with it, allowing admin access to the affected device.
The Adaptive Security Device Management (ASDM) remote-management feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.6) does not properly implement the authentication-certificate option, which allows remote attackers to bypass authentication via a TCP session to an ASDM interface, aka Bug ID CSCuh44815.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
The SSL implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0 before 9.0(2.6) and 9.1 before 9.1(2) allows remote attackers to bypass authentication, and obtain VPN access or administrative access, via a crafted X.509 client certificate, aka Bug ID CSCuf52468.
A vulnerability in the web-based management interface of Cisco UCS Director and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper authentication request handling. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow an unprivileged attacker to access and execute arbitrary actions through certain APIs.
The WIL-A module in Cisco TelePresence VX Clinical Assistant 1.2 before 1.21 changes the admin password to an empty password upon a reboot, which makes it easier for remote attackers to obtain access via the administrative interface, aka Bug ID CSCuj17238.
Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
Cisco TelePresence System Software 1.10.1 and earlier on 500, 13X0, 1X00, 30X0, and 3X00 devices, and 6.0.3 and earlier on TX 9X00 devices, has a default password for the pwrecovery account, which makes it easier for remote attackers to modify the configuration or perform arbitrary actions via HTTPS requests, aka Bug ID CSCui43128.
Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco Application Services Engine could allow an unauthenticated, remote attacker to gain privileged access to host-level operations or to learn device-specific information, create diagnostic files, and make limited configuration changes. For more information about these vulnerabilities, see the Details section of this advisory.
The web service framework in Cisco WAAS Software 4.x and 5.x before 5.0.3e, 5.1.x before 5.1.1c, and 5.2.x before 5.2.1 in a Central Manager (CM) configuration allows remote attackers to execute arbitrary code via a crafted POST request, aka Bug ID CSCuh26626.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.
Cisco Linksys E4200 1.0.05 Build 7 devices contain a Security Bypass Vulnerability which could allow remote attackers to gain unauthorized access.
Cisco Secure Access Control Server for Windows (ACS Windows) and Cisco Secure Access Control Server Solution Engine (ACS Solution Engine) 3.3.1, when the EAP-TLS protocol is enabled, does not properly handle expired or untrusted certificates, which allows remote attackers to bypass authentication and gain unauthorized access via a "cryptographically correct" certificate with valid fields such as the username.
Cisco Mediator Framework 1.5.1 before 1.5.1.build.14-eng, 2.2 before 2.2.1.dev.1, and 3.0 before 3.0.9.release.1 on the Cisco Network Building Mediator NBM-2400 and NBM-4800 and the Richards-Zeta Mediator 2500 does not properly restrict network access to an unspecified configuration file, which allows remote attackers to read passwords and unspecified other account details via a (1) XML RPC or (2) XML RPC over HTTPS session, aka Bug ID CSCtb83512.
A vulnerability in the upgrade mechanism of Cisco collaboration products based on the Cisco Voice Operating System software platform could allow an unauthenticated, remote attacker to gain unauthorized, elevated access to an affected device. The vulnerability occurs when a refresh upgrade (RU) or Prime Collaboration Deployment (PCD) migration is performed on an affected device. When a refresh upgrade or PCD migration is completed successfully, an engineering flag remains enabled and could allow root access to the device with a known password. If the vulnerable device is subsequently upgraded using the standard upgrade method to an Engineering Special Release, service update, or a new major release of the affected product, this vulnerability is remediated by that action. Note: Engineering Special Releases that are installed as COP files, as opposed to the standard upgrade method, do not remediate this vulnerability. An attacker who can access an affected device over SFTP while it is in a vulnerable state could gain root access to the device. This access could allow the attacker to compromise the affected system completely. Cisco Bug IDs: CSCvg22923, CSCvg55112, CSCvg55128, CSCvg55145, CSCvg58619, CSCvg64453, CSCvg64456, CSCvg64464, CSCvg64475, CSCvg68797.
Unknown vulnerability in Cisco ONS 15327 before 4.1(3), ONS 15454 before 4.6(1), ONS 15454 SD before 4.1(3), and Cisco ONS15600 before 1.3(0) allows a superuser whose account is locked out, disabled, or suspended to gain unauthorized access via a Telnet connection to the VxWorks shell.
Cisco Wireless LAN Solution Engine (WLSE) 2.0 through 2.5 and Hosting Solution Engine (HSE) 1.7 through 1.7.3 have a hardcoded username and password, which allows remote attackers to add new users, modify existing users, and change configuration.
The Management Console (webagent.exe) in Cisco Security Agent 5.1, 5.2, and 6.0 before 6.0.2.145 allows remote attackers to create arbitrary files and execute arbitrary code via unspecified parameters in a crafted st_upload request.
The Java Servlet framework on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 and Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug IDs CSCtf42005 and CSCtf42008.
Cisco Prime Data Center Network Manager (DCNM) before 6.1(1) does not properly restrict access to certain JBoss MainDeployer functionality, which allows remote attackers to execute arbitrary commands via JBoss Application Server Remote Method Invocation (RMI) services, aka Bug ID CSCtz44924.
A vulnerability in the Cisco Small Business Switches software could allow an unauthenticated, remote attacker to bypass the user authentication mechanism of an affected device. The vulnerability exists because under specific circumstances, the affected software enables a privileged user account without notifying administrators of the system. An attacker could exploit this vulnerability by using this account to log in to an affected device and execute commands with full admin rights. Cisco has not released software updates that address this vulnerability. This advisory will be updated with fixed software information once fixed software becomes available. There is a workaround to address this vulnerability.
The Cisco LEAP challenge/response authentication mechanism uses passwords in a way that is susceptible to dictionary attacks, which makes it easier for remote attackers to gain privileges via brute force password guessing attacks.
CiscoWorks Common Management Foundation (CMF) 2.1 and earlier allows the guest user to gain administrative privileges via a certain POST request to com.cisco.nm.cmf.servlet.CsAuthServlet, possibly involving the "cmd" parameter with a modifyUser value and a modified "priviledges" parameter.
CiscoWorks Common Management Foundation (CMF) 2.1 and earlier allows the guest user to obtain restricted information and possibly gain administrative privileges by changing the "guest" user to the Admin user on the Modify or delete users pages.
Multiple SSH2 servers and clients do not properly handle large packets or large fields, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code via buffer overflow attacks, as demonstrated by the SSHredder SSH protocol test suite.
Multiple SSH2 servers and clients do not properly handle strings with null characters in them when the string length is specified by a length field, which could allow remote attackers to cause a denial of service or possibly execute arbitrary code due to interactions with the use of null-terminated strings as implemented using languages such as C, as demonstrated by the SSHredder SSH protocol test suite.
A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.
A vulnerability in the web-based management interface of Cisco DNA Spaces Connector could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underling operating system with privileges of the web-based management application, which is running as a restricted user. This could result in changes being made to pages served by the web-based management application impacting the integrity or availability of the web-based management application.
Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the REST API of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability exists because different installations share a static encryption key. An attacker could exploit this vulnerability by using the static key to craft a valid session token. A successful exploit could allow the attacker to perform arbitrary actions through the REST API with administrative privileges.
A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.
A vulnerability in the Secure Sockets Layer (SSL) VPN feature of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device or cause the device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because HTTP requests are not properly validated. An attacker could exploit this vulnerability by sending a crafted HTTP request over an SSL connection to an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device or cause the device to reload, resulting in a DoS condition.
Multiple vulnerabilities in Cisco Firepower Management Center (FMC) Software and Cisco Firepower User Agent Software could allow an attacker to access a sensitive part of an affected system with a high-privileged account. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Java Remote Management Interface of Cisco Unified Contact Center Express (Unified CCX) could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit this vulnerability by sending a malicious serialized Java object to a specific listener on an affected system. A successful exploit could allow the attacker to execute arbitrary code as the root user on an affected device.