MCollective 2.7.0 and 2.8.x before 2.8.9, as used in Puppet Enterprise, allows remote attackers to execute arbitrary code via vectors related to the mco ping command.

Versions of MCollective prior to 2.10.4 deserialized YAML from agents without calling safe_load, allowing the potential for arbitrary code execution on the server. The fix for this is to call YAML.safe_load on input. This has been tested in all Puppet-supplied MCollective plugins, but there is a chance that third-party plugins could rely on this insecure behavior.

A flaw was discovered in Puppet Agent and Puppet Server that may result in a leak of HTTP credentials when following HTTP redirects to a different host. This is similar to CVE-2018-1000007

Versions of Puppet Agent prior to 1.6.0 included a version of the Puppet Execution Protocol (PXP) agent that passed environment variables through to Puppet runs. This could allow unauthorized code to be loaded. This bug was first introduced in Puppet Agent 1.3.0.

The pxp-agent component in Puppet Enterprise 2015.3.x before 2015.3.3 and Puppet Agent 1.3.x before 1.3.6 does not properly validate server certificates, which might allow remote attackers to spoof brokers and execute arbitrary commands via a crafted certificate.

mcollective has a default password set at install

puppetlabs-mysql 3.1.0 through 3.6.0 allow remote attackers to bypass authentication by leveraging creation of a database account without a password when a 'mysql_user' user parameter contains a host with a netmask.

A privilege escalation allowing remote code execution was discovered in the orchestration service.

Puppet 2.7.x before 2.7.22 and 3.2.x before 3.2.2, and Puppet Enterprise before 2.8.2, deserializes untrusted YAML, which allows remote attackers to instantiate arbitrary Ruby classes and execute arbitrary code via a crafted REST API call.

Puppet 2.7.x before 2.7.21 and 3.1.x before 3.1.1, when running Ruby 1.9.3 or later, allows remote attackers to execute arbitrary code via vectors related to "serialized attributes."

Command injection is possible in the puppetlabs-apt module prior to version 9.0.0. A malicious actor is able to exploit this vulnerability only if they are able to provide unsanitized input to the module. This condition is rare in most deployments of Puppet and Puppet Enterprise.

In certain situations it is possible for an unmanaged rule to exist on the target system that has the same comment as the rule specified in the manifest. This could allow for unmanaged rules to exist on the target system and leave the system in an unsafe state.

Versions of Puppet Enterprise prior to 2021.7.6 and 2023.5 contain a flaw which results in broken session management for SAML implementations.

In Puppet Bolt versions prior to 3.27.4, a path to escalate privileges was identified.

The express install, which is the suggested way to install Puppet Enterprise, gives the user a URL at the end of the install to set the admin password. If they do not use that URL, there is an overlooked default password for the admin user. This was resolved in Puppet Enterprise 2019.0.3 and 2018.1.9.

The previous version of Puppet Enterprise 2018.1 is vulnerable to unsafe code execution when upgrading pe-razor-server. Affected releases are Puppet Enterprise: 2018.1.x versions prior to 2018.1.1 and razor-server and pe-razor-server prior to 1.9.0.0.

Previously, Puppet Discovery was shipped with a default generated TLS certificate in the nginx container. In version 1.4.0, a unique certificate will be generated on installation or the user will be able to provide their own TLS certificate for ingress.

Puppet Enterprise 2015.3.3 and 2016.x before 2016.4.0, and Puppet Agent 1.3.6 through 1.7.0 allow remote attackers to bypass a host whitelist protection mechanism and execute arbitrary code on Puppet nodes via vectors related to command validation, aka "Puppet Execution Protocol (PXP) Command Whitelist Validation Vulnerability."

The Puppet Communications Protocol in Puppet Enterprise 2015.3.x before 2015.3.3 does not properly validate certificates for the broker node, which allows remote non-whitelisted hosts to prevent runs from triggering via unspecified vectors.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability, which was classified as critical, has been found in zzskzy Warehouse Refinement Management System 1.3. Affected by this issue is the function UploadCrash of the file /crash/log/SaveCrash.ashx. The manipulation of the argument file leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in LoveCards LoveCardsV2 up to 2.3.2 and classified as critical. This vulnerability affects unknown code of the file /api/system/other of the component Setting Handler. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in LoveCards LoveCardsV2 up to 2.3.2 and classified as critical. This issue affects some unknown processing of the file /api/upload/image. The manipulation of the argument file leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

OpenClaude is an open-source coding-agent command line interface for cloud and local model providers. Prior to version 0.5.1, the dangerouslyDisableSandbox parameter is exposed as part of the BashTool input schema, meaning the LLM (an untrusted principal per the project's own threat model) can set it to true in any tool_use response. Combined with the default allowUnsandboxedCommands: true setting, a prompt-injected model can escape the sandbox for any arbitrary command, achieving full host-level code execution. This issue has been patched in version 0.5.1.

Nginx UI is a web user interface for the Nginx web server. In version 2.3.5, an unauthenticated bootstrap takeover exists in nginx-ui during the initial installation window exposed by POST /api/install. At time of publication no public patches are available.

NetIQ eDirectory before 9.0 SP4 did not enforce login restrictions when "ebaclient" was used, allowing unpermitted access to eDirectory services.

Systems using the Marel Food Processing Systems Pluto platform do not restrict remote access. Marel has created an update for Pluto-based applications. This update will restrict remote access by implementing SSH authentication.

A vulnerability was determined in JeecgBoot up to 3.9.1. The affected element is the function LoginController.selectDepart of the file /sys/selectDepart. This manipulation causes improper access controls. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. Upgrading to version 3.9.2 is sufficient to fix this issue. It is suggested to upgrade the affected component.

The server permits communication without any authentication procedure, allowing the attacker to initiate a session with the server without providing any form of authentication.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

Hanwha Techwin SRN-4000, SRN-4000 firmware versions prior to SRN4000_v2.16_170401, A specially crafted http request and response could allow an attacker to gain access to the device management page with admin privileges without proper authentication.

An Improper Access Control issue was discovered in Schweitzer Engineering Laboratories (SEL) SEL-3620 and SEL-3622 Security Gateway Versions R202 and, R203, R203-V1, R203-V2 and, R204, R204-V1. The device does not properly enforce access control while configured for NAT port forwarding, which may allow for unauthorized communications to downstream devices.

A weakness has been identified in glowxq glowxq-oj up to 6f7c723090472057252040fd2bbbdaa1b5ed2393. This vulnerability affects the function Upload of the file business/business-system/src/main/java/com/glowxq/system/admin/controller/SysFileController.java. Executing a manipulation can lead to unrestricted upload. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The vendor was contacted early about this disclosure but did not respond in any way.

An authentication bypass vulnerability exists in the OAS Engine functionality of Open Automation Software OAS Platform v18.00.0072. A specially-crafted series of network requests can lead to arbitrary authentication. An attacker can send a sequence of requests to trigger this vulnerability.

Open-Xchange GmbH OX App Suite 7.8.3 and earlier is affected by: Incorrect Access Control.

Open-Xchange GmbH OX App Suite 7.8.3 is affected by: Incorrect Access Control.

A flaw has been found in JawherKl node-api-postgres up to 2.5. Affected is the function path.extname of the file index.js of the component Profile Picture Handler. This manipulation causes unrestricted upload. The attack is possible to be carried out remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Unauthenticated Arbitrary Options Update vulnerability leading to full website compromise discovered in Image Hover Effects Ultimate (versions <= 9.6.1) WordPress plugin.

A vulnerability, which was classified as critical, was found in zzskzy Warehouse Refinement Management System 3.1. Affected is the function ProcessRequest of the file /AcceptZip.ashx. The manipulation of the argument file leads to unrestricted upload. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The invite-anyone plugin before 1.3.16 for WordPress has incorrect access control for email-based invitations.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability classified as critical was found in hzmanyun Education and Training System 3.1.1. This vulnerability affects the function saveImage. The manipulation of the argument file leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in SourceCodester Best Church Management Software 1.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /admin/app/asset_crud.php. The manipulation of the argument photo1 leads to unrestricted upload. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Lumsoft ERP 8. Affected by this issue is some unknown functionality of the file /Api/TinyMce/UploadAjaxAPI.ashx of the component ASPX File Handler. The manipulation of the argument file leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in zj1983 zz up to 2024-8. This issue affects some unknown processing of the file src/main/java/com/futvan/z/system/zfile/ZfileAction.upload. The manipulation of the argument file leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in zj1983 zz up to 2024-8. This affects an unknown part of the file /resolve. The manipulation of the argument file leads to unrestricted upload. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in shishuocms 1.1 and classified as critical. This vulnerability affects the function handleRequest of the file src/main/java/com/shishuo/cms/action/manage/ManageUpLoadAction.java. The manipulation of the argument file leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A flaw was found in the CloudForms account configuration when using VMware. By default, a shared account is used that has privileged access to VMRC (VMWare Remote Console) functions that may not be appropriate for users of CloudForms (and thus this account). An attacker could use this vulnerability to view and make changes to settings in the VMRC and virtual machines controlled by it that they should not have access to.

A vulnerability was found in s-a-zhd Ecommerce-Website-using-PHP 1.0 and classified as critical. Affected by this issue is some unknown functionality of the file /customer_register.php. The manipulation of the argument name leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.