A vulnerability in Cisco WebEx Meetings Server could allow an authenticated, remote attacker to execute predetermined shell commands on other hosts. More Information: CSCuz03353. Known Affected Releases: 2.6.

The web framework in Cisco Identity Services Engine (ISE) 1.0 and 1.1.0 before 1.1.0.665-5, 1.1.1 before 1.1.1.268-7, 1.1.2 before 1.1.2.145-10, 1.1.3 before 1.1.3.124-7, 1.1.4 before 1.1.4.218-7, and 1.2 before 1.2.0.899-2 allows remote authenticated users to execute arbitrary commands via a crafted session on TCP port 443, aka Bug ID CSCuh81511.

The web framework in Cisco WAAS Software before 4.x and 5.x before 5.0.3e, 5.1.x before 5.1.1c, and 5.2.x before 5.2.1; Cisco ACNS Software 4.x and 5.x before 5.5.29.2; Cisco ECDS Software 2.x before 2.5.6; Cisco CDS-IS Software 2.x before 2.6.3.b50 and 3.1.x before 3.1.2b54; Cisco VDS-IS Software 3.2.x before 3.2.1.b9; Cisco VDS-SB Software 1.x before 1.1.0-b96; Cisco VDS-OE Software 1.x before 1.0.1; and Cisco VDS-OS Software 1.x in central-management mode allows remote authenticated users to execute arbitrary commands by appending crafted strings to values in GUI fields, aka Bug IDs CSCug40609, CSCug48855, CSCug48921, CSCug48872, CSCuh21103, CSCuh21020, and CSCug56790.

A vulnerability in the Redfish protocol of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by sending crafted authenticated commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary commands on an affected device with root privileges.

The administrative web interface on Cisco TelePresence Immersive Endpoint Devices before 1.7.4 allows remote authenticated users to execute arbitrary commands via a malformed request on TCP port 443, aka Bug ID CSCtn99724.

A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.

The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote authenticated users to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31685.

The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote authenticated users to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31659.

The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.6.x allows remote authenticated users to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCth24671.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure and Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system (OS) with the permissions of a special non-root user. In this way, an attacker could take control of the affected system, which would allow them to obtain and alter sensitive data. The attacker could also affect the devices that are managed by the affected system by pushing arbitrary configuration files, retrieving device credentials and confidential information, and ultimately undermining the stability of the devices, causing a denial of service (DoS) condition.

A vulnerability in the configuration dashboard of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to execute arbitrary code. This vulnerability is due to insufficient sanitization of configuration entries. An attacker could exploit this vulnerability by logging in as a super admin and entering crafted input to configuration options on the CSPC configuration dashboard. A successful exploit could allow the attacker to execute remote code as root.

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Command Runner tool of Cisco DNA Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation by the Command Runner tool. An attacker could exploit this vulnerability by providing crafted input during command execution or via a crafted command runner API call. A successful exploit could allow the attacker to execute arbitrary CLI commands on devices managed by Cisco DNA Center.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by invoking an interface monitoring mechanism with a crafted argument on the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands and obtain root privileges. The vulnerability is due to insufficient validation of user-supplied input in the Certificate Signing Request (CSR) function of the web-based management interface. An attacker could exploit this vulnerability by submitting a crafted CSR in the web-based management interface. A successful exploit could allow an attacker with administrator privileges to execute arbitrary commands on the device with full root privileges.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. The vulnerability is due to insufficient validation of command input by the affected software. An attacker could exploit this vulnerability by sending malicious commands to the web-based management interface of the affected software. A successful exploit could allow the attacker, with read-only privileges, to inject and execute arbitrary, system-level commands with root privileges on an affected device.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on an affected device. An attacker would need to have valid administrator credentials on the device. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker with elevated privileges could exploit this vulnerability by sending crafted commands to the administrative web management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.

A vulnerability in the update service of Cisco Webex Meetings Desktop App and Cisco Webex Productivity Tools for Windows could allow an authenticated, local attacker to execute arbitrary commands as a privileged user. The vulnerability is due to insufficient validation of user-supplied parameters. An attacker could exploit this vulnerability by invoking the update service command with a crafted argument. An exploit could allow the attacker to run arbitrary commands with SYSTEM user privileges. While the CVSS Attack Vector metric denotes the requirement for an attacker to have local access, administrators should be aware that in Active Directory deployments, the vulnerability could be exploited remotely by leveraging the operating system remote management tools. This vulnerability is fixed in Cisco Webex Meetings Desktop App Release 33.6.6 and 33.9.1 releases. This vulnerability is fixed in Cisco Webex Productivity Tools Release 33.0.7.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to incorrect input validation of user-supplied data by the NX-API subsystem. An attacker could exploit this vulnerability by sending malicious HTTP or HTTPS packets to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to perform a command-injection attack and execute arbitrary commands with root privileges. Note: NX-API is disabled by default. MDS 9000 Series Multilayer Switches are affected running software versions prior to 8.1(1b) and 8.2(3). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 7.0(3)I7(4). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected running software versions prior to 7.3(4)N1(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 7000 and 7700 Series Switches are affected running software versions prior to 7.3(3)D1(1) and 8.2(3).

A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the save command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the save command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user.

Multiple vulnerabilities in the REST and SOAP API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with administrative privileges on the DCNM application to inject arbitrary commands on the underlying operating system (OS). For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.

Multiple vulnerabilities in the REST and SOAP API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with administrative privileges on the DCNM application to inject arbitrary commands on the underlying operating system (OS). For more information about these vulnerabilities, see the Details section of this advisory. Note: The severity of these vulnerabilities is aggravated by the vulnerabilities described in the Cisco Data Center Network Manager Authentication Bypass Vulnerabilities advisory, published simultaneously with this one.

A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the WebUI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Intelligent Platform Management Interface (IPMI) of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of user-supplied commands. An attacker who has administrator privileges and access to the network where the IPMI resides could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to gain root privileges on the affected device.

Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with the privileges of the root user of the underlying operating system. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input in the web UI. A successful exploit could allow an attacker to execute arbitrary commands on the device with full root privileges.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to inject IOS commands to an affected device. The injected commands should require a higher privilege level in order to be executed. The vulnerability is due to insufficient input validation of specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific web UI endpoint on an affected device. A successful exploit could allow the attacker to inject IOS commands to the affected device, which could allow the attacker to alter the configuration of the device or cause a denial of service (DoS) condition.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Series Routers could allow an authenticated, remote attacker to inject arbitrary shell commands that are executed by an affected device. The vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary shell commands or scripts with root privileges on the affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device. The vulnerability is due to improper input sanitization. An attacker who has valid administrative access to an affected device could exploit this vulnerability by supplying a crafted input parameter on a form in the web UI and then submitting that form. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device, which could lead to complete system compromise.

The Device Manager GUI in Cisco Application Control Engine (ACE) 4710 A5 before A5(3.1) allows remote authenticated users to bypass intended RBAC restrictions and execute arbitrary CLI commands with admin privileges via an unspecified parameter in a POST request, aka Bug ID CSCul84801.

A vulnerability in the web management GUI of the Cisco D9800 Network Transport Receiver could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of GUI command arguments. An attacker could exploit this vulnerability by injecting crafted arguments into a vulnerable GUI command. An exploit could allow the attacker to execute commands on the underlying BusyBox operating system. These commands are run at the privilege level of the authenticated user. The attacker needs valid device credentials for this attack. Cisco Bug IDs: CSCvg74691.

A vulnerability in the error reporting feature of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to gain elevated privileges on an affected device. The vulnerability is due to a failure to properly validate certain parameters included within the error reporting application configuration. An attacker could exploit this vulnerability by sending a crafted command to the error reporting feature. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device.

A vulnerability in the CLI parser of Cisco Network Services Orchestrator (NSO) could allow an authenticated, remote attacker to execute arbitrary shell commands with the privileges of the root user. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting malicious arguments into vulnerable commands. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected system. This vulnerability affects the following releases of Cisco Network Services Orchestrator (NSO): 4.1 through 4.1.6.0, 4.2 through 4.2.4.0, 4.3 through 4.3.3.0, 4.4 through 4.4.2.0. Cisco Bug IDs: CSCvf99982.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 and RV345 Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device.

A vulnerability in the Secure Copy Protocol (SCP) server of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to access the shell of the underlying Linux operating system on the affected device. The vulnerability is due to improper input validation of command arguments. An attacker could exploit this vulnerability by using crafted arguments when opening a connection to the affected device. An exploit could allow the attacker to gain shell access with a non-root user account to the underlying Linux operating system on the affected device. Due to the system design, access to the Linux shell could allow execution of additional attacks that may have a significant impact on the affected system. This vulnerability affects Cisco devices that are running release 3.7.1, 3.6.3, or earlier releases of Cisco Enterprise NFV Infrastructure Software (NFVIS) when access to the SCP server is allowed on the affected device. Cisco NFVIS Releases 3.5.x and 3.6.x do allow access to the SCP server by default, while Cisco NFVIS Release 3.7.1 does not. Cisco Bug IDs: CSCvh25026.

A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866.

A vulnerability in the CronJob scheduler API of Cisco Digital Network Architecture (DNA) Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to incorrect input validation of user-supplied data. An attacker could exploit this vulnerability by sending a malicious packet. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Cisco Bug IDs: CSCvi42263.