The Label Distribution Protocol (LDP) functionality in Cisco NX-OS allows remote attackers to cause a denial of service (temporary LDP session outage) via LDP discovery traffic containing malformed Hello messages, aka Bug ID CSCul88851.

A vulnerability in the HTTP 2.0 request handling code of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the Event Management Service daemon (emsd) to crash, resulting in a denial of service (DoS) condition. More Information: CSCvb14425. Known Affected Releases: 6.1.1.BASE. Known Fixed Releases: 6.1.2.6i.MGBL 6.1.22.9i.MGBL 6.2.1.14i.MGBL.

Unspecified vulnerability in the HTTP compression functionality in Cisco CSS 11500 Series Content Services switches allows remote attackers to cause a denial of service (device reload) via (1) "valid, but obsolete" or (2) "specially crafted" HTTP requests.

The log4jinit web application in Cisco Unified Communications Manager (UCM) does not properly validate authentication, which allows remote attackers to cause a denial of service (performance degradation) via unspecified use of this application, aka Bug ID CSCum05347.

A vulnerability in the packet processing functionality of Cisco Embedded Wireless Controller (EWC) Software for Catalyst Access Points (APs) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected AP. This vulnerability is due to insufficient buffer allocation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to exhaust available resources and cause a DoS condition on an affected AP, as well as a DoS condition for client traffic traversing the AP.

Cisco WebEx Meetings Server 2.6 allows remote attackers to cause a denial of service (CPU consumption) by repeatedly accessing the account-validation component of an unspecified service, aka Bug ID CSCuy92704.

A vulnerability in the web application for Cisco IP Phones could allow an unauthenticated, remote attacker to execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software fails to check the bounds of input data. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web server of a targeted device. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a DoS condition.

The packet-processing microcode in Cisco IOS 15.2(2)EA, 15.2(2)EA1, 15.2(2)EA2, and 15.2(4)EA on Industrial Ethernet 4000 devices and 15.2(2)EB and 15.2(2)EB1 on Industrial Ethernet 5000 devices allows remote attackers to cause a denial of service (packet data corruption) via crafted IPv4 ICMP packets, aka Bug ID CSCuy13431.

Cisco Prime Network Analysis Module (NAM) before 6.2(1-b) miscalculates IPv6 payload lengths, which allows remote attackers to cause a denial of service (mond process crash and monitoring outage) via crafted IPv6 packets, aka Bug ID CSCuy37324.

The DHCPv6 relay implementation in Cisco Adaptive Security Appliance (ASA) Software 9.4.1 allows remote attackers to cause a denial of service (device reload) via crafted DHCPv6 packets, aka Bug ID CSCus23248.

The TCP implementation in Cisco Videoscape Distribution Suite for Internet Streaming (VDS-IS) 3.3(0), 3.3(1), 4.0(0), and 4.1(0) does not properly initiate new TCP sessions when a previous session is in a FIN wait state, which allows remote attackers to cause a denial of service (TCP outage) via vectors involving FIN packets, aka Bug ID CSCuy45136.

The tNetTaskLimit process on the Transport Node Controller (TNC) on Cisco ONS 15454 devices with software 9.6 and earlier does not properly prioritize health pings, which allows remote attackers to cause a denial of service (watchdog timeout and TNC reset) via a flood of network traffic, aka Bug ID CSCud97155.

A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause process crashes, which can result in a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of TCP packets when processed by the Cisco Fabric Services over IP (CFSoIP) feature. An attacker could exploit this vulnerability by sending a malicious Cisco Fabric Services TCP packet to an affected device. A successful exploit could allow the attacker to cause process crashes, resulting in a device reload and a DoS condition. Note: There are three distribution methods that can be configured for Cisco Fabric Services. This vulnerability affects only distribution method CFSoIP, which is disabled by default. See the Details section for more information.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) and Cisco Content Security Management Appliance (SMA) could allow an unauthenticated, remote attacker to cause repeated crashes in some internal processes that are running on the affected devices, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation of email attachments. An attacker could exploit this vulnerability by sending an email message with a crafted attachment through an affected device. A successful exploit could allow the attacker to cause specific processes to crash repeatedly, resulting in the complete unavailability of both the Cisco Advanced Malware Protection (AMP) and message tracking features and in severe performance degradation while processing email. After the affected processes restart, the software resumes filtering for the same attachment, causing the affected processes to crash and restart again. A successful exploit could also allow the attacker to cause a repeated DoS condition. Manual intervention may be required to recover from this situation.

A vulnerability in the IPv6 traffic processing of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an unexpected restart of the netstack process on an affected device. The vulnerability is due to improper validation of IPv6 traffic sent through an affected device. An attacker could exploit this vulnerability by sending a malformed IPv6 packet through an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition while the netstack process restarts. A sustained attack could lead to a reboot of the device.

A vulnerability in the DHCPv6 input packet processor of Cisco Prime Network Registrar could allow an unauthenticated, remote attacker to restart the server and cause a denial of service (DoS) condition on the affected system. The vulnerability is due to incomplete user-supplied input validation when a custom extension attempts to change a DHCPv6 packet received by the application. An attacker could exploit this vulnerability by sending malformed DHCPv6 packets to the application. An exploit could allow the attacker to trigger a restart of the service which, if exploited repeatedly, might lead to a DoS condition. This vulnerability can only be exploited if the administrator of the server has previously installed custom extensions that attempt to modify the packet details before the packet has been processed. Note: Although the CVSS score matches a High SIR, this has been lowered to Medium because this condition will only affect an application that has customer-developed extensions that will attempt to modify packet parameters before the packet has been completely sanitized. If packet modification in a custom extension happens after the packet has been sanitized, the application will not be affected by this vulnerability. Software versions prior to 8.3(7) and 9.1(2) are affected.

A vulnerability in the authentication service of the Cisco Unified Communications Manager IM and Presence (Unified CM IM&P) Service, Cisco TelePresence Video Communication Server (VCS), and Cisco Expressway Series could allow an unauthenticated, remote attacker to cause a service outage for users attempting to authenticate, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient controls for specific memory operations. An attacker could exploit this vulnerability by sending a malformed Extensible Messaging and Presence Protocol (XMPP) authentication request to an affected system. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing users from successfully authenticating. Exploitation of this vulnerability does not impact users who were authenticated prior to an attack.

A vulnerability in the Session Initiation Protocol (SIP) protocol implementation of Cisco Unified Communications Manager could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of input SIP traffic. An attacker could exploit this vulnerability by sending a malformed SIP packet to an affected Cisco Unified Communications Manager. A successful exploit could allow the attacker to trigger a new registration process on all connected phones, temporarily disrupting service.

A vulnerability in the web server of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to cause the web server process to crash, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient validation of user-supplied input on the web interface. An attacker could exploit this vulnerability by submitting a crafted HTTP request to certain endpoints of the affected software. A successful exploit could allow an attacker to cause the web server to crash. Physical access to the device may be required for a restart.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the SNMP application to leak system memory, which could cause an affected device to restart unexpectedly. The vulnerability is due to improper error handling when processing inbound SNMP packets. An attacker could exploit this vulnerability by sending multiple crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the SNMP application to leak system memory because of an improperly handled error condition during packet processing. Over time, this memory leak could cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

A vulnerability in the web interface of Cisco Small Business 200, 300, and 500 Series Managed Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of requests sent to the web interface. An attacker could exploit this vulnerability by sending a malicious request to the web interface of an affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a DoS condition.

A vulnerability in the web-based management interface of Cisco RV110W, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to disconnect clients that are connected to the guest network on an affected router. The vulnerability is due to improper authorization of an HTTP request. An attacker could exploit this vulnerability by accessing the URL for device disconnection and providing the connected device information. A successful exploit could allow the attacker to deny service to specific clients that are connected to the guest network.

The Control and Provisioning of Wireless Access Points (CAPWAP) protocol implementation on Cisco Wireless LAN Controller (WLC) devices allows remote attackers to cause a denial of service via a crafted CAPWAP packet that triggers a buffer over-read, aka Bug ID CSCuh81880.

A vulnerability in the implementation of the Short Message Service (SMS) handling functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to improper processing of SMS protocol data units (PDUs) that are encoded with a special character set. An attacker could exploit this vulnerability by sending a malicious SMS message to an affected device. A successful exploit could allow the attacker to cause the wireless WAN (WWAN) cellular interface module on an affected device to crash, resulting in a DoS condition that would require manual intervention to restore normal operating conditions.

The SNMP module in Cisco IOS XR allows remote attackers to cause a denial of service (process reload) via a request for an unspecified MIB, aka Bug ID CSCuh43144.

A vulnerability in the User Data Services (UDS) API of Cisco Unified Communications Manager (Unified CM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the management GUI. The vulnerability is due to improper validation of input parameters in the UDS API requests. An attacker could exploit this vulnerability by sending a crafted request to the UDS API of an affected device. A successful exploit could allow the attacker to make the A Cisco DB service quit unexpectedly, preventing admin access to the Unified CM management GUI. Manual intervention may be required to restore normal operation. Software versions 10.5, 11.5, 12.0, 12.5 are affected.

A vulnerability in the Network Address Translation 64 (NAT64) functions of Cisco IOS Software could allow an unauthenticated, remote attacker to cause either an interface queue wedge or a device reload. The vulnerability is due to the incorrect handling of certain IPv4 packet streams that are sent through the device. An attacker could exploit this vulnerability by sending specific IPv4 packet streams through the device. An exploit could allow the attacker to either cause an interface queue wedge or a device reload, resulting in a denial of service (DoS) condition.

A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software does not restrict the maximum size of certain files that can be written to disk. An attacker who has valid administrator credentials for an affected system could exploit this vulnerability by sending a crafted, remote connection request to an affected system. A successful exploit could allow the attacker to write a file that consumes most of the available disk space on the system, causing application functions to operate abnormally and leading to a DoS condition. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 12.5(1)SR1.

A vulnerability in the interactions between the DHCP and TFTP features for Cisco Small Business 300 Series (Sx300) Managed Switches could allow an unauthenticated, remote attacker to cause the device to become low on system memory, which in turn could lead to an unexpected reload of the device and result in a denial of service (DoS) condition on an affected device. The vulnerability is due to a failure to free system memory when an unexpected DHCP request is received. An attacker could exploit this vulnerability by sending a crafted DHCP packet to the targeted device. A successful exploit could allow the attacker to cause an unexpected reload of the device.

The DHCPv4 server in Cisco IOS XR 5.2.2 on ASR 9000 devices allows remote attackers to cause a denial of service (service outage) via a flood of crafted DHCP packets, aka Bug ID CSCup67822.

A vulnerability in the call-handling functionality of Session Initiation Protocol (SIP) Software for Cisco IP Phone 7800 Series and 8800 Series could allow an unauthenticated, remote attacker to cause an affected phone to reload unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability is due to incomplete error handling when XML data within a SIP packet is parsed. An attacker could exploit this vulnerability by sending a SIP packet that contains a malicious XML payload to an affected phone. A successful exploit could allow the attacker to cause the affected phone to reload unexpectedly, resulting in a temporary DoS condition.

telnetd in Cisco IOS XR 5.0.1 on Network Convergence System 6000 devices allows remote attackers to cause a denial of service (device reload) via a malformed TELNET packet, aka Bug ID CSCuq31566.

Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.

A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the PIM process to restart, resulting in a denial of service condition on an affected device. The vulnerability is due to the incorrect processing of crafted AutoRP packets. An attacker could exploit this vulnerability by sending crafted packets to port UDP 496 on a reachable IP address on the device. A successful exploit could allow the attacker to cause the PIM process to restart. Software versions prior to 6.2.3, 6.3.2, 6.4.0, and 6.5.1 are affected.

A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 7800 Series and Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code. The vulnerability exists because the software improperly validates user-supplied input during user authentication. An attacker could exploit this vulnerability by connecting to an affected device using HTTP and supplying malicious user credentials. A successful exploit could allow the attacker to trigger a reload of an affected device, resulting in a DoS condition, or to execute arbitrary code with the privileges of the app user. Cisco fixed this vulnerability in the following SIP Software releases: 10.3(1)SR5 and later for Cisco Unified IP Conference Phone 8831; 11.0(4)SR3 and later for Cisco Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 and later for the rest of the Cisco IP Phone 7800 Series and 8800 Series.

A vulnerability in the data acquisition (DAQ) component of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured access control policies or cause a denial of service (DoS) condition. The vulnerability exists because the affected software improperly manages system memory resources when inspecting traffic. An attacker could exploit this vulnerability by generating specific traffic patterns for the software to inspect. A successful exploit could allow the attacker to exhaust system memory resources used for traffic inspection. Depending on the configuration, the FTD Software could fail open and cease to inspect traffic or fail closed and result in a DoS condition. This vulnerability may require manual intervention to restore the software.

A vulnerability in the detection engine of Cisco Firepower Threat Defense Software could allow an unauthenticated, remote attacker to cause the unexpected restart of the SNORT detection engine, resulting in a denial of service (DoS) condition. The vulnerability is due to the incomplete error handling of the SSL or TLS packet header during the connection establishment. An attacker could exploit this vulnerability by sending a crafted SSL or TLS packet during the connection handshake. An exploit could allow the attacker to cause the SNORT detection engine to unexpectedly restart, resulting in a partial DoS condition while the detection engine restarts. Versions prior to 6.2.3.4 are affected.

Multiple vulnerabilities in the Server Message Block (SMB) Protocol preprocessor detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent or remote attacker to cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.

A vulnerability in the default configuration of the Cisco Aironet Active Sensor could allow an unauthenticated, remote attacker to restart the sensor. The vulnerability is due to a default local account with a static password. The account has privileges only to reboot the device. An attacker could exploit this vulnerability by guessing the account name and password to access the CLI. A successful exploit could allow the attacker to reboot the device repeatedly, creating a denial of service (DoS) condition. It is not possible to change the configuration or view sensitive data with this account. Versions prior to DNAC1.2.8 are affected.

The WebApplications Identity Management subsystem in Cisco Unified Communications Manager 10.5(0.98000.88) allows remote attackers to cause a denial of service (subsystem outage) via invalid session tokens, aka Bug ID CSCul83786.

Cisco NX-OS 5.0 and earlier on MDS 9000 devices allows remote attackers to cause a denial of service (supervisor CPU consumption) via Authentication Header (AH) authentication in a Virtual Router Redundancy Protocol (VRRP) frame, aka Bug ID CSCte27874.

The Java process in the Impact server in Cisco Prime Central for Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (process crash) via a flood of TCP packets, aka Bug ID CSCug57345.

A vulnerability in the Session Initiation Protocol (SIP) call processing of Cisco Meeting Server (CMS) software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of the Cisco Meeting Server. The vulnerability is due to insufficient validation of Session Description Protocol (SDP) messages. An attacker could exploit this vulnerability by sending a crafted SDP message to the CMS call bridge. An exploit could allow the attacker to cause the CMS to reload, causing a DoS condition for all connected clients. Versions prior to 2.3.9 are affected.