A vulnerability in Cisco Webex Meetings for Android could allow an unauthenticated, local attacker to perform a cross-site scripting attack against the application. The vulnerability is due to insufficient validation of the application input parameters. An attacker could exploit this vulnerability by sending a malicious request to the Webex Meetings application through an intent. A successful exploit could allow the attacker to execute script code in the context of the Webex Meetings application. Versions prior to 11.7.0.236 are affected.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access hidden commands. The vulnerability is due to the presence of undocumented configuration commands. An attacker could exploit this vulnerability by performing specific steps that make the hidden commands accessible. A successful exploit could allow the attacker to make configuration changes to various sections of an affected device that should not be exposed to CLI access.

The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.8(1)S5 allows remote attackers to cause a denial of service (device crash) via a malformed header, aka Bug ID CSCsz13590.

The Cisco Optical Service Module (OSM) for the Catalyst 6500 and 7600 series running Cisco IOS 12.1(8)E through 12.1(13.4)E allows remote attackers to cause a denial of service (hang) via a malformed packet.

The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S11 and 9.7(3)P before 9.7(3)P11 allows remote attackers to cause a denial of service (device crash) via a long message, aka Bug ID CSCsk44115.

The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S9 and 9.7(3)P before 9.7(3)P9 allows remote attackers to cause a denial of service (device crash) via a malformed Contact header, aka Bug ID CSCsj98521.

The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S9 and 9.7(3)P before 9.7(3)P9 allows remote attackers to cause a denial of service (device crash) via a malformed header, aka Bug ID CSCsk04588.

Cisco TFTP Server 1.1 allows remote attackers to cause a denial of service (daemon crash) via a crafted (1) read (aka RRQ) or (2) write (aka WRQ) request, or other TFTP packet. NOTE: some of these details are obtained from third party information.

The Cisco Content Services Switch (CSS) 11500 with software before 8.20.4.02 and the Application Control Engine (ACE) 4710 with software before A2(3.0) do not properly handle use of LF, CR, and LFCR as alternatives to the standard CRLF sequence between HTTP headers, which allows remote attackers to bypass intended header insertions or conduct HTTP request smuggling attacks via crafted header data, as demonstrated by LF characters preceding ClientCert-Subject and ClientCert-Subject-CN headers, aka Bug ID CSCta04885.

The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.7(3)S11 allows remote attackers to cause a denial of service (device crash) via a malformed packet, aka Bug ID CSCsk32606.

Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allow remote attackers to cause a denial of service (IKE process hang) via malformed NAT-T packets, aka Bug ID CSCsr74439.

The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.7(3)S10 allows remote attackers to cause a denial of service (device crash) via a malformed session attribute, aka Bug ID CSCsk40030.

Cisco IOS before 15.0(1)XA does not properly handle IRC traffic during a specific time period after an initial reload, which allows remote attackers to cause a denial of service (device reload) via an attempted connection to a certain IRC server, related to a "corrupted magic value," aka Bug ID CSCso05336.

Multiple SSH2 servers and clients do not properly handle large packets or large fields, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code via buffer overflow attacks, as demonstrated by the SSHredder SSH protocol test suite.

Multiple SSH2 servers and clients do not properly handle strings with null characters in them when the string length is specified by a length field, which could allow remote attackers to cause a denial of service or possibly execute arbitrary code due to interactions with the use of null-terminated strings as implemented using languages such as C, as demonstrated by the SSHredder SSH protocol test suite.

The MGCP implementation on the Cisco PGW 2200 Softswitch with software before 9.7(3)S11 allows remote attackers to cause a denial of service (device crash) via a malformed packet, aka Bug ID CSCsl39126.

The Web Install ActiveX control (CSDWebInstaller) in Cisco Secure Desktop (CSD) before 3.5.841 does not properly verify the signatures of downloaded programs, which allows remote attackers to force the download and execution of arbitrary files via a crafted web page, aka Bug ID CSCta25876.

Multiple SSH2 servers and clients do not properly handle lists with empty elements or strings, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.

Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allow remote attackers to cause a denial of service (traceback) via malformed TCP packets, aka Bug ID CSCsm84110.

A vulnerability in the Layer 3 multicast feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed IPv4 multicast packets that are received on line cards where the interface has either an IPv4 access control list (ACL) or a QoS policy applied. An attacker could exploit this vulnerability by sending crafted IPv4 multicast packets through an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset. Traffic over that line card would be lost while the line card reloads.

A vulnerability in the IPv4 access control list (ACL) feature and quality of service (QoS) policy feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed IPv4 packets that are received on line cards where the interface has either an IPv4 ACL or QoS policy applied. An attacker could exploit this vulnerability by sending crafted IPv4 packets through an affected device. A successful exploit could allow the attacker to cause network processor errors, resulting in a reset or shutdown of the network process. Traffic over that line card would be lost while the line card reloads. Note: This vulnerability has predominantly been observed in Layer 2 VPN (L2VPN) environments where an IPv4 ACL or QoS policy has been applied to the bridge virtual interface. Layer 3 configurations where the interface has either an IPv4 ACL or QoS policy applied are also affected, though the vulnerability has not been observed.

A vulnerability in the SNORT detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a file policy that is configured to block the Server Message Block Version 2 (SMB2) protocol. The vulnerability is due to the incorrect detection of an SMB2 file when the detection is based on the length of the file. An attacker could exploit this vulnerability by sending a crafted SMB2 transfer request through the targeted device. A successful exploit could allow the attacker to bypass filters that are configured to block SMB2 traffic. Cisco Bug IDs: CSCve58398.

Cisco Prime Network Services Controller 3.0 allows local users to bypass intended access restrictions and execute arbitrary commands via additional parameters to an unspecified command, aka Bug ID CSCus99427.

A vulnerability in the Border Gateway Protocol (BGP) over an Ethernet Virtual Private Network (EVPN) for Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a denial of service (DoS) condition, or potentially corrupt the BGP routing table, which could result in network instability. The vulnerability exists due to changes in the implementation of the BGP MPLS-Based Ethernet VPN RFC (RFC 7432) draft between IOS XE software releases. When the BGP Inclusive Multicast Ethernet Tag Route or BGP EVPN MAC/IP Advertisement Route update packet is received, it could be possible that the IP address length field is miscalculated. An attacker could exploit this vulnerability by sending a crafted BGP packet to an affected device after the BGP session was established. An exploit could allow the attacker to cause the affected device to reload or corrupt the BGP routing table; either outcome would result in a DoS. The vulnerability may be triggered when the router receives a crafted BGP message from a peer on an existing BGP session. This vulnerability affects all releases of Cisco IOS XE Software prior to software release 16.3 that support BGP EVPN configurations. If the device is not configured for EVPN, it is not vulnerable. Cisco Bug IDs: CSCui67191, CSCvg52875.

A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of received IPv4 PIMv2 packets. An attacker could exploit this vulnerability by sending a crafted PIMv2 packet to a PIM-enabled interface on an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Note: This vulnerability can be exploited with either an IPv4 multicast or unicast packet.

A vulnerability in the web-based management interface of Cisco Secure Firewall Management Center (FMC) Software, formerly Firepower Management Center Software, could allow an authenticated, remote attacker to inject arbitrary HTML content into a device-generated document. This vulnerability is due to improper validation of user-supplied data. An attacker could exploit this vulnerability by submitting malicious content to an affected device and using the device to generate a document that contains sensitive information. A successful exploit could allow the attacker to alter the standard layout of the device-generated documents, access arbitrary files from the underlying operating system, and conduct server-side request forgery (SSRF) attacks. To successfully exploit this vulnerability, an attacker would need valid credentials for a user account with policy-editing permissions, such as Network Admin, Intrusion Admin, or any custom user role with the same capabilities.

A vulnerability in the Remote Access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to improper validation of client key data after the TLS session is established. An attacker could exploit this vulnerability by sending a crafted key value to an affected system over the secure TLS session. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the External Agent Assignment Service (EAAS) feature of Cisco Enterprise Chat and Email (ECE) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of Media Routing Peripheral Interface Manager (MR PIM) traffic that is received by an affected device. An attacker could exploit this vulnerability by sending crafted MR PIM traffic to an affected device. A successful exploit could allow the attacker to trigger a failure on the MR PIM connection between Cisco ECE and Cisco Unified Contact Center Enterprise (CCE), leading to a DoS condition on EAAS that would prevent customers from starting chat, callback, or delayed callback sessions. Note: When the attack traffic stops, the EAAS process must be manually restarted to restore normal operation. To restart the process in the System Console, choose Shared Resources > Services > Unified CCE > EAAS, then click Start.

Cisco VPN 3000 series concentrators before 2.5.2(F) allow remote attackers to cause a denial of service via a flood of invalid login requests to (1) the SSL service, or (2) the telnet service, which do not properly disconnect the user after several failed login attempts.

A vulnerability in the PPP over Ethernet (PPPoE) termination feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, adjacent attacker to crash the ppp_ma process, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of malformed PPPoE packets that are received on a router that is running Broadband Network Gateway (BNG) functionality with PPPoE termination on a Lightspeed-based or Lightspeed-Plus-based line card. An attacker could exploit this vulnerability by sending a crafted PPPoE packet to an affected line card interface that does not terminate PPPoE. A successful exploit could allow the attacker to crash the ppp_ma process, resulting in a DoS condition for PPPoE traffic across the router.

Cisco IOS XR 3.4.0 through 3.8.1 allows remote attackers to cause a denial of service (session reset) via a BGP UPDATE message with an invalid attribute, as demonstrated in the wild on 17 August 2009.

A vulnerability in the IP packet processing of Cisco Access Point (AP) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of certain IPv4 packets. An attacker could exploit this vulnerability by sending a crafted IPv4 packet either to or through an affected device. A successful exploit could allow the attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To successfully exploit this vulnerability, the attacker does not need to be associated with the affected AP. This vulnerability cannot be exploited by sending IPv6 packets.

A vulnerability in the web-based management interface of Cisco Finesse could allow an unauthenticated, remote attacker to conduct a stored XSS attack by exploiting an RFI vulnerability. This vulnerability is due to insufficient validation of user-supplied input for specific HTTP requests that are sent to an affected device. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive information on the affected device.

The Internet Access Point Protocol (IAPP) module on Cisco Wireless LAN Controller (WLC) devices with software 8.1(104.37) allows remote attackers to trigger incorrect traffic forwarding via crafted IPv6 packets, aka Bug ID CSCuv40033.

A vulnerability in the web-based management interface of Cisco TelePresence Management Suite (TMS) could allow a low-privileged, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface. This vulnerability is due to insufficient input validation by the web-based management interface. An attacker could exploit this vulnerability by inserting malicious data in a specific data field in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.

Cisco NX-OS 7.1(1)N1(1) on Nexus 5500, 5600, and 6000 devices does not properly validate PDUs in SNMP packets, which allows remote attackers to cause a denial of service (SNMP application restart) via a crafted packet, aka Bug ID CSCut84645.

CRLF injection vulnerability in +webvpn+/index.html in WebVPN on Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allows remote attackers to inject arbitrary HTTP headers as demonstrated by a redirect attack involving a %0d%0aLocation%3a sequence in a URI, or conduct HTTP response splitting attacks via unspecified vectors, aka Bug ID CSCsr09163.

The Certificate Authority Proxy Function (CAPF) service in Cisco Unified Communications Manager 5.x before 5.1(3e) and 6.x before 6.1(3) allows remote attackers to cause a denial of service (voice service outage) by sending malformed input over a TCP session in which the "client terminates prematurely."

The Cisco Wireless LAN Controller (WLC), Cisco Catalyst 6500 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.x before 4.2.176.0 and 5.2.x before 5.2.157.0 allow remote attackers to cause a denial of service (device reload) via a web authentication (aka WebAuth) session that includes a malformed POST request to login.html.

Cisco Catalyst 2900XL switch allows a remote attacker to create a denial of service via an empty UDP packet sent to port 161 (SNMP) when SNMP is disabled.

The publish-event event-manager feature in Cisco IOS 15.5(2)S and 15.5(3)S on Cloud Services Router 1000V devices allows local users to execute arbitrary commands with root privileges by leveraging administrative access to enter crafted environment variables, aka Bug ID CSCux14943.

The IOS HTTP service in Cisco routers and switches running IOS 11.1 through 12.1 allows remote attackers to cause a denial of service by requesting a URL that contains a %% string.

Cisco Secure Access Control Server (ACS) Solution Engine 5.7(0.15) allows remote authenticated users to cause a denial of service (SSH screen process crash) via crafted (1) CLI or (2) GUI commands, aka Bug ID CSCuw24694.

The Cisco Unified Communications Manager (CUCM) may be vulnerable to data that can be displayed inside an iframe within a web page, which in turn could lead to a clickjacking attack. More Information: CSCuz64683 CSCuz64698. Known Affected Releases: 11.0(1.10000.10), 11.5(1.10000.6), 11.5(0.99838.4). Known Fixed Releases: 11.0(1.22048.1), 11.5(0.98000.1070), 11.5(0.98000.284)11.5(0.98000.346), 11.5(0.98000.768), 11.5(1.10000.3), 11.5(1.10000.6), 11.5(2.10000.2).

Cisco ASR 5500 System Architecture Evolution (SAE) Gateway devices with software 19.1.0.61559 and 19.2.0 allow remote attackers to cause a denial of service (BGP process restart) via a crafted header in a BGP packet, aka Bug ID CSCuw65781.

Cisco Firepower Management Center before 6.1 and FireSIGHT System Software before 6.1, when certain malware blocking options are enabled, allow remote attackers to bypass malware detection via crafted fields in HTTP headers, aka Bug ID CSCuz44482.

Cisco Unified Communications Manager 4.1 before 4.1(3)SR7, 4.2 before 4.2(3)SR4, 4.3 before 4.3(2), 5.x before 5.1(3), and 6.x before 6.1(1) does not properly validate SIP URLs, which allows remote attackers to cause a denial of service (service interruption) via a SIP INVITE message, aka Bug ID CSCsl22355.

The HTTP server in Cisco Adaptive Security Appliance (ASA) 5500 devices 8.0 before 8.0(3)15 and 8.1 before 8.1(1)5, when configured as a clientless SSL VPN endpoint, does not properly process URIs, which allows remote attackers to cause a denial of service (device reload) via a URI in a crafted SSL or HTTP packet, aka Bug ID CSCsq19369.

The Computer Telephony Integration (CTI) Manager service in Cisco Unified Communications Manager (CUCM) 5.x before 5.1(3c) and 6.x before 6.1(2) allows remote attackers to cause a denial of service (TSP crash) via malformed network traffic to TCP port 2748.