A security vulnerability has been detected in D-Link DI-8100 16.07.26A1. Affected by this vulnerability is the function url_rule_asp of the file /url_rule.asp of the component POST Parameter Handler. Such manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

A weakness has been identified in D-Link DI-8100 16.07.26A1. Affected is the function sprintf of the file /auto_reboot.asp of the component HTTP Handler. This manipulation of the argument enable/time causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability was found in D-Link DI-8100 16.07.26A1. This affects the function tgfile_htm of the file tgfile.htm of the component CGI Endpoint. The manipulation of the argument fn results in buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

A vulnerability was detected in D-Link DIR-816 1.10CNB05. Affected by this vulnerability is an unknown functionality of the file /goform/form2Wl5BasicSetup.cgi of the component goahead. Performing a manipulation of the argument pskValue results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A weakness has been identified in D-Link DIR-816 1.10CNB05. This impacts an unknown function of the file /goform/form2Wl5RepeaterStep2.cgi of the component goahead. This manipulation of the argument key1/key2/key3/key4/pskValue causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in D-Link DIR-816 1.10CNB05. This affects an unknown function of the file /goform/form2RepeaterStep2.cgi of the component goahead. The manipulation of the argument key1/key2/key3/key4/pskValue results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

Buffer overflow in the SSH server functionality on the D-Link DES-3800 with firmware before 4.50B052, DWL-2100AP with firmware before 2.50RC548, and DWL-3200AP with firmware before 2.55RC549 allows remote attackers to execute arbitrary code or cause a denial of service via unspecified vectors.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary performs a memcpy operation at address 0x00011E34 with the value sent in the "Authorization: Basic" RTSP header and stores it on the stack. The number of bytes to be copied are calculated based on the length of the string sent in the RTSP header by the client. As a result, memcpy copies more data then it can hold on stack and this results in corrupting the registers for the caller function sub_F6CC which results in memory corruption. The severity of this attack is enlarged by the fact that the same value is then copied on the stack in the function 0x00011378 and this allows to overflow the buffer allocated and thus control the PC register which will result in arbitrary code execution on the device.

D-Link EyeOn Baby Monitor (DCS-825L) 1.08.1 has a remote code execution vulnerability. A UDP "Discover" service, which provides multiple functions such as changing the passwords and getting basic information, was installed on the device. A remote attacker can send a crafted UDP request to finderd to perform stack overflow and execute arbitrary code with root privilege on the device.

Buffer overflow in D-Link DAP-2310 2.06 and earlier, DAP-2330 1.06 and earlier, DAP-2360 2.06 and earlier, DAP-2553 H/W ver. B1 3.05 and earlier, DAP-2660 1.11 and earlier, DAP-2690 3.15 and earlier, DAP-2695 1.16 and earlier, DAP-3320 1.00 and earlier, and DAP-3662 1.01 and earlier allows remote attackers to have unspecified impact via a crafted 'dlink_uid' cookie.

A security vulnerability has been detected in D-Link DIR-816 1.10CNB05. Affected is an unknown function of the file /goform/form2WlanBasicSetup.cgi of the component goahead. Such manipulation of the argument pskValue leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Stack-based buffer overflow in the DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary code via a long string in a GetDeviceSettings action to the HNAP interface.

Stack-based buffer overflow in login_mgr.cgi in D-Link firmware DNR-320L and DNS-320LW before 1.04b08, DNR-322L before 2.10 build 03, DNR-326 before 2.10 build 03, and DNS-327L before 1.04b01 allows remote attackers to execute arbitrary code by crafting malformed "Host" and "Referer" header values.

Stack-based buffer overflow in the do_hnap function in www/my_cgi.cgi in D-Link DSP-W215 (Rev. A1) with firmware 1.01b06 and earlier, DIR-505 with firmware before 1.08b10, and DIR-505L with firmware 1.01 and earlier allows remote attackers to execute arbitrary code via a long Content-Length header in a GetDeviceSettings action in an HNAP request.

A vulnerability, which was classified as critical, has been found in D-Link DIR-825 2.10. This issue affects the function sub_410DDC of the file switch_language.cgi of the component httpd. The manipulation of the argument Language leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-632 FW103B08. Affected by this issue is the function get_pure_content of the component HTTP POST Request Handler. The manipulation of the argument Content-Length leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on D-Link DIR-825 R1 devices through 3.0.1 before 2020-11-20. A buffer overflow in the web interface allows attackers to achieve pre-authentication remote code execution.

authentication.cgi on D-Link DIR-868L devices with Singapore StarHub firmware before v1.21SHCb03 allows remote attackers to execute arbitrary code.

A vulnerability was found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this issue is the function wirelessApcli_5g of the file /goform/wirelessApcli_5g. The manipulation of the argument apcli_mode_5g/apcli_enc_5g/apcli_default_key_5g leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. This vulnerability affects unknown code of the file /goform/form2lansetup.cgi. The manipulation of the argument ip leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-816 1.10CNB05. It has been declared as critical. This vulnerability affects the function QoSPortSetup of the file /goform/QoSPortSetup. The manipulation of the argument port0_group/port0_remarker/ssid0_group/ssid0_remarker leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-816 1.10CNB05. It has been classified as critical. This affects the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DAP-1620 1.03. Affected by this issue is the function set_ws_action of the file /dws/api/ of the component Path Handler. The manipulation leads to heap-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in D-Link DAP-1620 1.03. This affects the function check_dws_cookie of the file /storage of the component Cookie Handler. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DAP-1620 1.03 and classified as critical. This issue affects the function check_dws_cookie of the file /storage. The manipulation of the argument uid leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DAP-1620 1.03 and classified as critical. This vulnerability affects the function mod_graph_auth_uri_handler of the file /storage of the component Authentication Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-600 up to 2.15WWb02. Affected by this vulnerability is an unknown functionality of the file hedwig.cgi of the component HTTP Header Handler. The manipulation of the argument Cookie results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in D-Link DIR-816L 2_06_b09_beta. Affected by this vulnerability is the function authenticationcgi_main of the file /authentication.cgi. Performing manipulation of the argument Password results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link DCS-960L v1.07.102. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HNAP service, which listens on TCP port 80 by default. When parsing the SOAPAction request header, the process does not properly validate the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-8458.

In the /HNAP1/SetRouterSettings message, the RemotePort parameter is vulnerable, and the vulnerability affects D-Link DIR-818LW Rev.A 2.05.B03 and DIR-822 B1 202KRb06 devices. In the SetRouterSettings.php source code, the RemotePort parameter is saved in the $path_inf_wan1."/web" internal configuration memory without any regex checking. And in the IPTWAN_build_command function of the iptwan.php source code, the data in $path_inf_wan1."/web" is used with the iptables command without any regex checking. A vulnerable /HNAP1/SetRouterSettings XML message could have shell metacharacters in the RemotePort element such as the `telnetd` string.

The D-Link DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary commands via a GetDeviceSettings action to the HNAP interface.

OS command injection vulnerability in soap.cgi (soapcgi_main in cgibin) in D-Link DIR-880L DIR-880L_REVA_FIRMWARE_PATCH_1.08B04 and previous versions, DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-65L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to execute arbitrary OS commands via the service parameter.

D-Link DIR-620 devices, with a certain Rostelekom variant of firmware 1.0.37, have a hardcoded rostel account, which makes it easier for remote attackers to obtain access via a TELNET session.

In the web server on D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, there is a hardcoded password of anonymous for the admin account.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the urladd parameter in /goform/websURLFilterAddDel.

A flaw has been found in D-Link DIR-868L 110b03. This affects the function sub_1BF84 of the component SSDP Service. This manipulation of the argument ST causes os command injection. It is possible to initiate the attack remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link COVR-2600R and COVR-3902 Kit before 1.01b05Beta01 use hardcoded credentials for telnet connection, which allows unauthenticated attackers to gain privileged access to the router, and to extract sensitive data or modify the configuration.

D-Link DIR-816 A2 1.10 B05 devices allow arbitrary remote code execution without authentication via the newpass parameter. In the /goform/form2userconfig.cgi handler function, a long password may lead to a stack-based buffer overflow and overwrite a return address.

D-Link DIR-822 Rev.B 202KRb06, DIR-822 Rev.C 3.10B06, DIR-860L Rev.B 2.03.B03, DIR-868L Rev.B 2.05B02, DIR-880L Rev.A 1.20B01_01_i3se_BETA, and DIR-890L Rev.A 1.21B02_BETA devices mishandle IsAccessPoint in /HNAP1/SetAccessPointMode. In the SetAccessPointMode.php source code, the IsAccessPoint parameter is saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. A vulnerable /HNAP1/SetAccessPointMode XML message could have shell metacharacters in the IsAccessPoint element such as the `telnetd` string.

D-Link DCM-604 DCM604_C1_ViaCabo_1.04_20130606 and DCM-704 EU_DCM-704_1.10 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

In the /HNAP1/SetWiFiVerifyAlpha message, the WPSPIN parameter is vulnerable, and the vulnerability affects D-Link DIR-822 B1 202KRb06 devices. In the SetWiFiVerifyAlpha.php source code, the WPSPIN parameter is saved in the $rphyinf1."/media/wps/enrollee/pin" and $rphyinf2."/media/wps/enrollee/pin" and $rphyinf3."/media/wps/enrollee/pin" internal configuration memory without any regex checking. And in the do_wps function of the wps.php source code, the data in $rphyinf3."/media/wps/enrollee/pin" is used with the wpatalk command without any regex checking. A vulnerable /HNAP1/SetWiFiVerifyAlpha XML message could have shell metacharacters in the WPSPIN element such as the `telnetd` string.

An issue was discovered in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 and DIR-605L Rev.B 2.12B1 devices. There is a stack-based buffer overflow allowing remote attackers to execute arbitrary code without authentication via the goform/formLanguageChange currTime parameter.

In the /HNAP1/SetQoSSettings message, the uplink parameter is vulnerable, and the vulnerability affects D-Link DIR-822 Rev.B 202KRb06 and DIR-822 Rev.C 3.10B06 devices. In the SetQoSSettings.php source code, the uplink parameter is saved in the /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth internal configuration memory without any regex checking. And in the bwc_tc_spq_start, bwc_tc_wfq_start, and bwc_tc_adb_start functions of the bwcsvcs.php source code, the data in /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth is used with the tc command without any regex checking. A vulnerable /HNAP1/SetQoSSettings XML message could have shell metacharacters in the uplink element such as the `telnetd` string.

On D-Link DAP-1530 (A1) before firmware version 1.06b01, DAP-1610 (A1) before firmware version 1.06b01, DWR-111 (A1) before firmware version 1.02v02, DWR-116 (A1) before firmware version 1.06b03, DWR-512 (B1) before firmware version 2.02b01, DWR-711 (A1) through firmware version 1.11, DWR-712 (B1) before firmware version 2.04b01, DWR-921 (A1) before firmware version 1.02b01, and DWR-921 (B1) before firmware version 2.03b01, there exists an EXCU_SHELL file in the web directory. By sending a GET request with specially crafted headers to the /EXCU_SHELL URI, an attacker could execute arbitrary shell commands in the root context on the affected device. Other devices might be affected as well.

spaces.htm on multiple D-Link devices (DSL, DIR, DWR) allows remote unauthenticated attackers to discover admin credentials.

An issue was discovered on D-Link Central WiFi Manager before v 1.03r0100-Beta1. They expose an FTP server that serves by default on port 9000 and has hardcoded credentials (admin, admin). Taking advantage of this, a remote unauthenticated attacker could execute arbitrary PHP code by uploading any file in the web root directory and then accessing it via a request.