Buffer overflow in WN-G300R3 firmware Ver.1.03 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

Devices with IP address setting tool "MagicalFinder" provided by I-O DATA DEVICE, INC. allow authenticated attackers to execute arbitrary OS commands via unspecified vectors.

TS-WPTCAM firmware version 1.18 and earlier, TS-WPTCAM2 firmware version 1.00, TS-WLCE firmware version 1.18 and earlier, TS-WLC2 firmware version 1.18 and earlier, TS-WRLC firmware version 1.17 and earlier, TS-PTCAM firmware version 1.18 and earlier, TS-PTCAM/POE firmware version 1.18 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

WN-G300R3 firmware 1.03 and earlier allows attackers with administrator rights to execute arbitrary OS commands via unspecified vectors.

WN-AX1167GR firmware version 3.00 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

WFS-SR03 v1.0.3 was discovered to contain a command injection vulnerability via the pro_stor_canceltrans_handler_part_19 function.

WFS-SR03 v1.0.3 was discovered to contain a command injection vulnerability via the sys_smb_pwdmod function.

I-O DATA DEVICE TS-WRLP firmware version 1.01.02 and earlier and TS-WRLA firmware version 1.01.02 and earlier allows an attacker with administrator rights to execute arbitrary OS commands via unspecified vectors.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in I-O DATA network attached hard disk 'HDL-T Series' firmware Ver.1.21 and earlier when 'Remote Link3 function' is enabled. If exploited, a remote unauthenticated attacker may execute an arbitrary OS command.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in UD-LT2 firmware Ver.1.00.008_SE and earlier. If an attacker logs in to the affected product with an administrative account and manipulates requests for a certain screen operation, an arbitrary OS command may be executed. This vulnerability was reported on a different screen operation from CVE-2025-20617.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in UD-LT2 firmware Ver.1.00.008_SE and earlier. If a user logs in to CLI of the affected product, an arbitrary OS command may be executed.

Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in UD-LT2 firmware Ver.1.00.008_SE and earlier. If an attacker logs in to the affected product with an administrative account and manipulates requests for a certain screen operation, an arbitrary OS command may be executed. This vulnerability was reported on a different screen operation from CVE-2025-26856.

UD-LT1 firmware Ver.2.1.9 and earlier and UD-LT1/EX firmware Ver.2.1.9 and earlier allow a remote authenticated attacker with an administrative account to execute arbitrary OS commands.

The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote attackers to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31640.

The CGI subsystem on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 allows remote attackers to execute arbitrary commands via a request to TCP port 443, related to a "command injection vulnerability," aka Bug ID CSCtf97221.

D-Link DIR-822 Rev.B 202KRb06, DIR-822 Rev.C 3.10B06, DIR-860L Rev.B 2.03.B03, DIR-868L Rev.B 2.05B02, DIR-880L Rev.A 1.20B01_01_i3se_BETA, and DIR-890L Rev.A 1.21B02_BETA devices mishandle IsAccessPoint in /HNAP1/SetAccessPointMode. In the SetAccessPointMode.php source code, the IsAccessPoint parameter is saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. A vulnerable /HNAP1/SetAccessPointMode XML message could have shell metacharacters in the IsAccessPoint element such as the `telnetd` string.

The Python CGI scripts in PWS in Imperva SecureSphere 13.0.10, 13.1.10, and 13.2.10 allow remote attackers to execute arbitrary OS commands because command-line arguments are mishandled.

An issue was discovered in ASUSWRT 3.0.0.4.384.20308. When processing the /start_apply.htm POST data, there is a command injection issue via shell metacharacters in the fb_email parameter. By using this issue, an attacker can control the router and get shell.

Remote Code execution vulnerability in Micro Focus Operation Bridge Reporter (OBR) product, affecting version 10.40. The vulnerability could be exploited to allow Remote Code Execution on the OBR server.

In the /HNAP1/SetWiFiVerifyAlpha message, the WPSPIN parameter is vulnerable, and the vulnerability affects D-Link DIR-822 B1 202KRb06 devices. In the SetWiFiVerifyAlpha.php source code, the WPSPIN parameter is saved in the $rphyinf1."/media/wps/enrollee/pin" and $rphyinf2."/media/wps/enrollee/pin" and $rphyinf3."/media/wps/enrollee/pin" internal configuration memory without any regex checking. And in the do_wps function of the wps.php source code, the data in $rphyinf3."/media/wps/enrollee/pin" is used with the wpatalk command without any regex checking. A vulnerable /HNAP1/SetWiFiVerifyAlpha XML message could have shell metacharacters in the WPSPIN element such as the `telnetd` string.

In the /HNAP1/SetRouterSettings message, the RemotePort parameter is vulnerable, and the vulnerability affects D-Link DIR-818LW Rev.A 2.05.B03 and DIR-822 B1 202KRb06 devices. In the SetRouterSettings.php source code, the RemotePort parameter is saved in the $path_inf_wan1."/web" internal configuration memory without any regex checking. And in the IPTWAN_build_command function of the iptwan.php source code, the data in $path_inf_wan1."/web" is used with the iptables command without any regex checking. A vulnerable /HNAP1/SetRouterSettings XML message could have shell metacharacters in the RemotePort element such as the `telnetd` string.

LibreNMS 1.46 allows remote attackers to execute arbitrary OS commands by using the $_POST['community'] parameter to html/pages/addhost.inc.php during creation of a new device, and then making a /ajax_output.php?id=capture&format=text&type=snmpwalk&hostname=localhost request that triggers html/includes/output/capture.inc.php command mishandling.

An issue was discovered on Teracue ENC-400 devices with firmware 2.56 and below. The login form passes user input directly to a shell command without any kind of escaping or validation in /usr/share/www/check.lp file. An attacker is able to perform command injection using the "password" parameter in the login form.

The web interface on FASTGate Fastweb devices with firmware through 0.00.47_FW_200_Askey 2017-05-17 (software through 1.0.1b) exposed a CGI binary that is vulnerable to a command injection vulnerability that can be exploited to achieve remote code execution with root privileges. No authentication is required in order to trigger the vulnerability.

On D-Link DIR-818LW Rev.A 2.05.B03 and DIR-860L Rev.B 2.03.B03 devices, unauthenticated remote OS command execution can occur in the soap.cgi service of the cgibin binary via an "&&" substring in the service parameter. NOTE: this issue exists because of an incomplete fix for CVE-2018-6530.

In the /HNAP1/SetQoSSettings message, the uplink parameter is vulnerable, and the vulnerability affects D-Link DIR-822 Rev.B 202KRb06 and DIR-822 Rev.C 3.10B06 devices. In the SetQoSSettings.php source code, the uplink parameter is saved in the /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth internal configuration memory without any regex checking. And in the bwc_tc_spq_start, bwc_tc_wfq_start, and bwc_tc_adb_start functions of the bwcsvcs.php source code, the data in /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth is used with the tc command without any regex checking. A vulnerable /HNAP1/SetQoSSettings XML message could have shell metacharacters in the uplink element such as the `telnetd` string.

The FXCLI_OraBR_Exec_Command function in FastBackServer.exe in the Server in IBM Tivoli Storage Manager (TSM) FastBack 5.5.0.0 through 5.5.6.0 and 6.1.0.0 through 6.1.0.1 uses values of packet fields to determine the content and length of data copied to memory, which allows remote attackers to execute arbitrary code via a crafted packet. NOTE: this might overlap CVE-2010-3059.

Format string vulnerability in the _Eventlog function in FastBackServer.exe in the Server in IBM Tivoli Storage Manager (TSM) FastBack 5.5.0.0 through 5.5.6.0 and 6.1.0.0 through 6.1.0.1 allows remote attackers to execute arbitrary code via format string specifiers located after a | (pipe) character in a string. NOTE: this might overlap CVE-2010-3059.

freeciv 2.2 before 2.2.1 and 2.3 before 2.3.0 allows attackers to read arbitrary files or execute arbitrary commands via a scenario that contains Lua functionality, related to the (1) os, (2) io, (3) package, (4) dofile, (5) loadfile, (6) loadlib, (7) module, and (8) require modules or functions.

The Web Console in Commvault Edge Server 10 R2 allows remote attackers to execute arbitrary OS commands via crafted serialized data in a cookie.

Unauthenticated remote code execution occurs in D-Link products such as DIR-655C, DIR-866L, DIR-652, and DHP-1565. The issue occurs when the attacker sends an arbitrary input to a "PingTest" device common gateway interface that could lead to common injection. An attacker who successfully triggers the command injection could achieve full system compromise. Later, it was independently found that these are also affected: DIR-855L, DAP-1533, DIR-862L, DIR-615, DIR-835, and DIR-825.

LPAR2RRD in 3.5 and earlier allows remote attackers to execute arbitrary commands due to insufficient input sanitization of the web GUI parameters.

The web interface in chumby one before 1.0.4 and chumby classic before 1.7.2 allows remote attackers to execute arbitrary commands via shell metacharacters in a request.

An unspecified CGI script in Cisco FX-OS before 1.1.2 on Firepower 9000 devices and Cisco Unified Computing System (UCS) Manager before 2.2(4b), 2.2(5) before 2.2(5a), and 3.0 before 3.0(2e) allows remote attackers to execute arbitrary shell commands via a crafted HTTP request, aka Bug ID CSCur90888.

In modules/HELPBOT_MODULE in Budabot 0.6 through 4.0, lax syntax validation allows remote attackers to perform a command injection attack against the PHP daemon with a crafted command, resulting in a denial of service or possibly unspecified other impact, as demonstrated by the "!calc 5 x 5" command. In versions before 3.0, modules/HELPBOT_MODULE/calc.php has the vulnerable code; in 3.0 and above, modules/HELPBOT_MODULE/HelpbotController.class.php has the vulnerable code.

TYPE-MOON Fate/stay night, Fate/hollow ataraxia, Witch on the Holy Night, and Fate/stay night + hollow ataraxia set allow remote attackers to execute arbitrary OS commands via crafted saved data.

An OS Command Injection vulnerability exists in the ping.php script functionality of Advantech R-SeeNet v 2.4.12 (20.10.2020). A specially crafted HTTP request can lead to arbitrary OS command execution. An attacker can send a crafted HTTP request to trigger this vulnerability.

The escapeshellarg function in ext/standard/exec.c in PHP before 5.4.42, 5.5.x before 5.5.26, and 5.6.x before 5.6.10 on Windows allows remote attackers to execute arbitrary OS commands via a crafted string to an application that accepts command-line arguments for a call to the PHP system function.

An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ONVIF devicemgmt SetDNS method allows remote attackers to execute arbitrary OS commands via the IPv4Address field.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/NTPSyncWithHost route. This could lead to command injection via shell metacharacters.

Argument injection vulnerability in the traceroute function in Traceroute.php in the Net_Traceroute package before 0.21.2 for PEAR allows remote attackers to execute arbitrary shell commands via the host parameter. NOTE: some of these details are obtained from third party information.

The Belkin Wemo Enabled Crock-Pot allows command injection in the Wemo UPnP API via the SmartDevURL argument to the SetSmartDevInfo action. A simple POST request to /upnp/control/basicevent1 can allow an attacker to execute commands without authentication.

Western Digital WD My Book Live and WD My Book Live Duo (all versions) have a root Remote Command Execution bug via shell metacharacters in the /api/1.0/rest/language_configuration language parameter. It can be triggered by anyone who knows the IP address of the affected device, as exploited in the wild in June 2021 for factory reset commands,

In Geutebrueck GmbH E2 Camera Series versions prior to 1.12.0.25 the DDNS configuration (in the Network Configuration panel) is vulnerable to an OS system command injection as root.

costview3/xmlrpc_server/xmlrpc.php in CostView in Caldera 9.20 allows remote attackers to execute arbitrary commands via shell metacharacters in a methodCall element in a PHP XMLRPC request.

Shell Metacharacter Injection in www/modules/save.php in FruityWifi (aka PatatasFritas/PatataWifi) through 2.4 allows remote attackers to execute arbitrary code with root privileges via a crafted mod_name parameter in a POST request. NOTE: unlike in CVE-2018-17317, the attacker does not need a valid session.

Pydio (formerly AjaXplorer) before 6.0.7 allows remote attackers to execute arbitrary commands via unspecified vectors, aka "Pydio OS Command Injection Vulnerabilities."

An issue was discovered on Tenda AC9 V15.03.05.19(6318)_CN, AC15 V15.03.05.19_CN, and AC18 V15.03.05.19(6318)_CN devices. They allow remote code execution via shell metacharacters in the usbName field to the __fastcall function with a POST request.

PaperThin CommonSpot before 7.0.2 and 8.x before 8.0.3 allows remote attackers to execute arbitrary code via shell metacharacters in an unspecified context.

Autodesk VRED Professional 2014 before SR1 SP8 allows remote attackers to execute arbitrary code via Python os library calls in Python API commands to the integrated web server.