The Photo Sharing Plus component on Sony Bravia TV through 8.587 devices allows Shell Metacharacter Injection.

Sony PCS-XG100, PCS-XG100S, PCS-XG100C, PCS-XG77, PCS-XG77S, PCS-XG77C devices with firmware versions prior to Ver.1.51 and PCS-XC1 devices with firmware version prior to Ver.1.22 allow an attacker on the same network segment to bypass authentication to perform administrative operations via unspecified vectors.

Sony XAV-AX8500 Bluetooth SDP Protocol Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Sony XAV-AX8500 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of the Bluetooth SDP protocol. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-26288.

The WNM Sleep Mode code in wpa_supplicant 2.x before 2.6 does not properly ignore key data in response frames when management frame protection (MFP) was not negotiated, which allows remote attackers to inject arbitrary broadcast or multicast packets or cause a denial of service (ignored packets) via a WNM Sleep Mode response.

bootp in Apple iOS before 8.4.1 and OS X before 10.10.5 allows remote attackers to obtain potentially sensitive information about MAC addresses seen in previous Wi-Fi sessions by sniffing an 802.11 network for DNAv4 broadcast traffic.

Samsung SBeam allows remote attackers to read arbitrary images by leveraging an NFC connection to access the HTTP server on port 15000.

A vulnerability in the TCL Android Smart TV series V8-R851T02-LF1 V295 and below and V8-T658T01-LF1 V373 and below by TCL Technology Group Corporation allows an attacker on the adjacent network to arbitrarily browse and download sensitive files over an insecure web server running on port 7989 that lists all files & directories. An unprivileged remote attacker on the adjacent network, can download most system files, leading to serious critical information disclosure. Also, some TV models and/or FW versions may expose the webserver with the entire filesystem accessible on another port. For example, nmap scan for all ports run directly from the TV model U43P6046 (Android 8.0) showed port 7983 not mentioned in the original CVE description, but containing the same directory listing of the entire filesystem. This webserver is bound (at least) to localhost interface and accessible freely to all unprivileged installed apps on the Android such as a regular web browser. Any app can therefore read any files of any other apps including Android system settings including sensitive data such as saved passwords, private keys etc.

In Vecna VGo Robot versions prior to 3.0.3.52164, an attacker may be able to capture firmware updates through the adjacent network.

All versions up to V1.1.10P3T18 of ZTE ZXHN F670 product are impacted by information exposure vulnerability, which may allow an unauthenticated attacker to get the GPON SN information via appviahttp service.

Schneider Electric InduSoft Web Studio before 7.1.3.4 SP3 Patch 4 and InTouch Machine Edition 2014 before 7.1.3.4 SP3 Patch 4 transmit cleartext credentials, which allows remote attackers to obtain sensitive information by sniffing the network.

Insufficient input validation in the Intel Driver & Support Assistant before 3.6.0.4 may allow an unauthenticated user to potentially enable information disclosure via adjacent access.

A vulnerability in the multicast DNS (mDNS) protocol configuration of Cisco Webex Meetings Client for MacOS could allow an unauthenticated adjacent attacker to obtain sensitive information about the device on which the Webex client is running. The vulnerability exists because sensitive information is included in the mDNS reply. An attacker could exploit this vulnerability by doing an mDNS query for a particular service against an affected device. A successful exploit could allow the attacker to gain access to sensitive information.

A potential remote code execution and information disclosure vulnerability exists in Micro Focus Operations Bridge containerized suite versions 2017.11, 2018.02, 2018.05, 2018.08. This vulnerability could allow for information disclosure.

Cisco-Meraki MS, MR, and MX devices with firmware before 2014-09-24 allow remote attackers to obtain sensitive credential information by leveraging unspecified HTTP handler access on the local network, aka Cisco-Meraki defect ID 00302012.

A vulnerability has been found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /currentsetting.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys WRT54GL 4.30.18. It has been declared as problematic. This vulnerability affects unknown code of the file /SysInfo1.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. VDB-253330 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A CWE-200: Exposure of Sensitive Information to an Unauthorized Actor vulnerability exists in Modicon M221 (all references, all versions) that could allow non sensitive information disclosure when the attacker has captured the traffic between EcoStruxure Machine - Basic software and Modicon M221 controller.

A information disclosure vulnerability in the Android system (bluetooth). Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-67058064.

A vulnerability was found in Hikvision Intercom Broadcasting System 3.0.3_20201113_RELEASE(HIK). It has been classified as problematic. This affects an unknown part of the file access/html/system.html of the component Log File Handler. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. Upgrading to version 4.1.0 is able to address this issue. It is recommended to upgrade the affected component. The identifier VDB-248253 was assigned to this vulnerability.

Symantec Messaging Gateway (SMG) before 10.0 allows remote attackers to obtain potentially sensitive information about component versions via unspecified vectors.

The TrackR Bravo mobile app stores the account password used to authenticate to the cloud API in cleartext in the cache.db file. Updated apps, version 5.1.6 for iOS and 2.2.5 for Android, have been released by the vendor to address the vulnerabilities in CVE-2016-6538, CVE-2016-6539, CVE-2016-6540 and CVE-2016-6541.

On Fitbit activity-tracker devices, certain addresses never change. According to the popets-2019-0036.pdf document, this leads to "permanent trackability" and "considerable privacy concerns" without a user-accessible anonymization feature. The devices, such as Charge 2, transmit Bluetooth Low Energy (BLE) advertising packets with a TxAdd flag indicating random addresses, but the addresses remain constant. If devices come within BLE range at one or more locations where an adversary has set up passive sniffing, the adversary can determine whether the same device has entered one of these locations.

Unauthenticated access to the cloud-based service maintained by TrackR Bravo is allowed for querying or sending GPS data for any Trackr device by using the tracker ID number which can be discovered as described in CVE-2016-6539. Updated apps, version 5.1.6 for iOS and 2.2.5 for Android, have been released by the vendor to address the vulnerabilities in CVE-2016-6538, CVE-2016-6539, CVE-2016-6540 and CVE-2016-6541.

Juniper Networks ScreenOS devices do not pad Ethernet packets with zeros, and thus some packets can contain fragments of system memory or data from previous packets. This issue is often detected as CVE-2003-0001. The issue affects all versions of Juniper Networks ScreenOS prior to 6.3.0r25.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST) and DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to discover the CM MAC address by connecting to the device's xfinitywifi hotspot.

The image build process for the overcloud images in Red Hat OpenStack Platform 8.0 (Liberty) director and Red Hat Enterprise Linux OpenStack Platform 7.0 (Kilo) director (aka overcloud-full) use a default root password of ROOTPW, which allows attackers to gain access via unspecified vectors.

A vulnerability was found in Rebuild up to 3.5.5 and classified as problematic. This issue affects the function QiniuCloud.getStorageFile of the file /filex/proxy-download. The manipulation of the argument url leads to information disclosure. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252455.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D7800 before 1.0.1.28, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.48, and WNDR4500v3 before 1.0.0.48.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D7800 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.48, and WNDR4500v3 before 1.0.0.48.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects EX3700 before 1.0.0.64, EX3800 before 1.0.0.64, EX6120 before 1.0.0.32, EX6130 before 1.0.0.16, R6300v2 before 1.0.4.12, R6700 before 1.0.1.26, R6900 before 1.0.1.22, R7000 before 1.0.9.6, R7300DST before 1.0.0.52, R7900 before 1.0.1.12, R8000 before 1.0.3.24, and R8500 before 1.0.2.94.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects DST6501 before 1.1.0.6 and WNR2000v2 before 1.2.0.8.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D6220 before 1.0.0.32, D6400 before 1.0.0.60, D8500 before 1.0.3.29, R6250 before 1.0.4.16, R6300v2 before 1.0.4.18, R6400 before 1.01.32, R6400v2 before 1.0.2.44, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7000 before 1.0.9.14, R7000P before 1.3.0.8, R6900P before 1.3.0.8, R7100LG before 1.0.0.34, R7300DST before 1.0.0.56, R7900 before 1.0.1.26, R8000 before 1.0.4.4, R8500 before 1.0.2.106, R8300 before 1.0.2.106, and WNDR3400v3 before 1.0.1.16.

Syska Smart Bulb devices through 2017-08-06 receive RGB parameters over cleartext Bluetooth Low Energy (BLE), leading to sniffing, reverse engineering, and replay attacks.

The API service on Google Home and Chromecast devices before mid-July 2018 does not prevent DNS rebinding attacks from reading the scan_results JSON data, which allows remote attackers to determine the physical location of most web browsers by leveraging the presence of one of these devices on its local network, extracting the scan_results bssid fields, and sending these fields in a geolocation/v1/geolocate Google Maps Geolocation API request.

A information disclosure vulnerability in the Android system (bluetooth). Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-68818034.

Huawei B315s-22 products with software of 21.318.01.00.26 have an information leak vulnerability. Unauthenticated adjacent attackers may exploit this vulnerability to obtain device information.

A information disclosure vulnerability in the Broadcom wi-fi driver. Product: Android. Versions: Android kernel. Android ID: A-37305578. References: B-V2017052301.

A information disclosure vulnerability in the Android system (bluetooth). Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0. Android ID: A-63146698.

An issue was discovered in WiZ Colors A60 1.14.0. The device sends unnecessary information to the cloud controller server. Although this information is sent encrypted and has low risk in isolation, it decreases the privacy of the end user. The information sent includes the local IP address being used and the SSID of the Wi-Fi network the device is connected to. (Various resources such as wigle.net can be use for mapping of SSIDs to physical locations.)

A vulnerability in the packet processing code of Cisco IOS Software for Cisco Aironet Access Points could allow an unauthenticated, adjacent attacker to retrieve content from memory on an affected device, which could lead to the disclosure of confidential information. The vulnerability is due to insufficient condition checks that are performed by the affected device when the device adds padding to egress packets. An attacker could exploit this vulnerability by sending a crafted IP packet to an affected device. A successful exploit could allow the attacker to retrieve content from memory on the affected device, which could lead to the disclosure of confidential information. Cisco Bug IDs: CSCvc21581.

The Bluetooth Low Energy (BLE) subsystem on Tapplock devices before 2018-06-12 relies on Key1 and SerialNo for unlock operations; however, these are derived from the MAC address, which is broadcasted by the device.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

All versions of the SDP server in BlueZ 5.46 and earlier are vulnerable to an information disclosure vulnerability which allows remote attackers to obtain sensitive information from the bluetoothd process memory. This vulnerability lies in the processing of SDP search attribute requests.

Centreon before 19.10.7 exposes Session IDs in server responses.

Aterm WF1200CR and Aterm WG1200CR (Aterm WF1200CR firmware Ver1.1.1 and earlier, Aterm WG1200CR firmware Ver1.0.1 and earlier) allow an attacker on the same network segment to obtain information registered on the device via unspecified vectors.