Multiple unspecified API endpoints in Jenkins before 1.650 and LTS before 1.642.2 allow remote authenticated users to execute arbitrary code via serialized data in an XML file, related to XStream and groovy.util.Expando.

Redis is an open source, in-memory database that persists on disk. In affected versions specially crafted Lua scripts executing in Redis can cause the heap-based Lua stack to be overflowed, due to incomplete checks for this condition. This can result with heap corruption and potentially remote code execution. This problem exists in all versions of Redis with Lua scripting support, starting from 2.6. The problem is fixed in versions 6.2.6, 6.0.16 and 5.0.14. For users unable to update an additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from executing Lua scripts. This can be done using ACL to restrict EVAL and EVALSHA commands.

A flaw was found in PolicyKit (aka polkit) 0.115 that allows a user with a uid greater than INT_MAX to successfully execute any systemctl command.

An issue was discovered in Linaro LAVA before 2018.5.post1. Because of use of yaml.load() instead of yaml.safe_load() when parsing user data, remote code execution can occur.

Multiple stack-based buffer overflows in the File Transfer feature in rfbserver.c in LibVNCServer 0.9.9 and earlier allow remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a (1) long file or (2) directory name or the (3) FileTime attribute in a rfbFileTransferOffer message.

The SProcXFixesSelectSelectionInput function in the XFixes extension in X.Org X Window System (aka X11 or X) X11R6.8.0 and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length value.

The SProcXCMiscGetXIDList function in the XC-MISC extension in X.Org X Window System (aka X11 or X) X11R6.0 and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value.

The XInput extension in X.Org X Window System (aka X11 or X) X11R4 and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) SProcXChangeDeviceControl, (2) ProcXChangeDeviceControl, (3) ProcXChangeFeedbackControl, (4) ProcXSendExtensionEvent, (5) SProcXIAllowEvents, (6) SProcXIChangeCursor, (7) ProcXIChangeHierarchy, (8) SProcXIGetClientPointer, (9) SProcXIGrabDevice, (10) SProcXIUngrabDevice, (11) ProcXIUngrabDevice, (12) SProcXIPassiveGrabDevice, (13) ProcXIPassiveGrabDevice, (14) SProcXIPassiveUngrabDevice, (15) ProcXIPassiveUngrabDevice, (16) SProcXListDeviceProperties, (17) SProcXDeleteDeviceProperty, (18) SProcXIListProperties, (19) SProcXIDeleteProperty, (20) SProcXIGetProperty, (21) SProcXIQueryDevice, (22) SProcXIQueryPointer, (23) SProcXISelectEvents, (24) SProcXISetClientPointer, (25) SProcXISetFocus, (26) SProcXIGetFocus, or (27) SProcXIWarpPointer function.

The GLX extension in XFree86 4.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) __glXDisp_Render, (2) __glXDisp_RenderLarge, (3) __glXDispSwap_VendorPrivate, (4) __glXDispSwap_VendorPrivateWithReply, (5) set_client_info, (6) __glXDispSwap_SetClientInfoARB, (7) DoSwapInterval, (8) DoGetProgramString, (9) DoGetString, (10) __glXDispSwap_RenderMode, (11) __glXDisp_GetCompressedTexImage, (12) __glXDispSwap_GetCompressedTexImage, (13) __glXDisp_FeedbackBuffer, (14) __glXDispSwap_FeedbackBuffer, (15) __glXDisp_SelectBuffer, (16) __glXDispSwap_SelectBuffer, (17) __glXDisp_Flush, (18) __glXDispSwap_Flush, (19) __glXDisp_Finish, (20) __glXDispSwap_Finish, (21) __glXDisp_ReadPixels, (22) __glXDispSwap_ReadPixels, (23) __glXDisp_GetTexImage, (24) __glXDispSwap_GetTexImage, (25) __glXDisp_GetPolygonStipple, (26) __glXDispSwap_GetPolygonStipple, (27) __glXDisp_GetSeparableFilter, (28) __glXDisp_GetSeparableFilterEXT, (29) __glXDisp_GetConvolutionFilter, (30) __glXDisp_GetConvolutionFilterEXT, (31) __glXDisp_GetHistogram, (32) __glXDisp_GetHistogramEXT, (33) __glXDisp_GetMinmax, (34) __glXDisp_GetMinmaxEXT, (35) __glXDisp_GetColorTable, (36) __glXDisp_GetColorTableSGI, (37) GetSeparableFilter, (38) GetConvolutionFilter, (39) GetHistogram, (40) GetMinmax, or (41) GetColorTable function.

Ansible Tower through version 3.2.3 has a vulnerability that allows users only with access to define variables for a job template to execute arbitrary code on the Tower server.

A heap-buffer overflow was found in the way samba clients processed extra long filename in a directory listing. A malicious samba server could use this flaw to cause arbitrary code execution on a samba client. Samba versions before 4.6.16, 4.7.9 and 4.8.4 are vulnerable.

A vulnerability was discovered in SPICE before version 0.14.1 where the generated code used for demarshalling messages lacked sufficient bounds checks. A malicious client or server, after authentication, could send specially crafted messages to its peer which would result in a crash or, potentially, other impacts.

source-to-image component of Openshift Container Platform before versions atomic-openshift 3.7.53, atomic-openshift 3.9.31 is vulnerable to a privilege escalation which allows the assemble script to run as the root user in a non-privileged container. An attacker can use this flaw to open network connections, and possibly other actions, on the host which are normally only available to a root user.

A flaw was found in RPC request using gfs2_create_req in glusterfs server. An authenticated attacker could use this flaw to create arbitrary files and execute arbitrary code on glusterfs server nodes.

A flaw was found in the way Postgresql allowed a user to modify the behavior of a query for other users. An attacker with a user account could use this flaw to execute code with the permissions of superuser in the database. Versions 9.3 through 10 are affected.

A flaw was found in source-to-image function as shipped with Openshift Enterprise 3.x. An improper path validation of tar files in ExtractTarStreamFromTarReader in tar/tar.go leads to privilege escalation.

The Gluster file system through versions 4.1.4 and 3.12 is vulnerable to a heap-based buffer overflow in the '__server_getspec' function via the 'gf_getspec_req' RPC message. A remote authenticated attacker could exploit this to cause a denial of service or other potential unspecified impact.

The oVirt Engine backend module, as used in Red Hat Enterprise Virtualization Manager before 3.4.2, uses an "insecure DocumentBuilderFactory," which allows remote attackers to read arbitrary files or possibly have other unspecified impact via a crafted XML/RSDL document, related to an XML External Entity (XXE) issue.

A flaw was found in RPC request using gfs3_mknod_req supported by glusterfs server. An authenticated attacker could use this flaw to write files to an arbitrary location via path traversal and execute arbitrary code on a glusterfs server node.

Multiple integer overflow and buffer overflow issues were discovered in spice-client's handling of LZ compressed frames. A malicious server could cause the client to crash or, potentially, execute arbitrary code.

spice versions though 0.13 are vulnerable to out-of-bounds memory access when processing specially crafted messages from authenticated attacker to the spice server resulting into crash and/or server memory leak.

The users controller in Katello 1.5.0-14 and earlier, and Red Hat Satellite, does not check authorization for the update_roles action, which allows remote authenticated users to gain privileges by setting a user account to an administrator account.

The user module in ansible before 1.6.6 allows remote authenticated users to execute arbitrary commands.

Use of Out-of-range Pointer Offset in GitHub repository vim/vim prior to 8.2.4440.

Heap buffer overflow in Clickhouse's LZ4 compression codec when parsing a malicious query. There is no verification that the copy operations in the LZ4::decompressImpl loop and especially the arbitrary copy operation wildCopy<copy_amount>(op, ip, copy_end), don’t exceed the destination buffer’s limits. This issue is very similar to CVE-2021-43304, but the vulnerable copy operation is in a different wildCopy call.

Buffer overflow in the ParseCommand function in hpgl-input.c in the hpgltops program for CUPS 1.1.22 allows remote attackers to execute arbitrary code via a crafted HPGL file.

Heap buffer overflow in Clickhouse's LZ4 compression codec when parsing a malicious query. There is no verification that the copy operations in the LZ4::decompressImpl loop and especially the arbitrary copy operation wildCopy<copy_amount>(op, ip, copy_end), don’t exceed the destination buffer’s limits.

A flaw was found in Keycloak before version 11.0.0, where the code base contains usages of ObjectInputStream without type checks. This flaw allows an attacker to inject arbitrarily serialized Java Objects, which would then get deserialized in a privileged context and potentially lead to remote code execution.

A security-check flaw was found in the way the Heketi 5 server API handled user requests. An authenticated Heketi user could send specially crafted requests to the Heketi server, resulting in remote command execution as the user running Heketi server and possibly privilege escalation.

It was found that sssd's sysdb_search_user_by_upn_res() function before 1.16.0 did not sanitize requests when querying its local cache and was vulnerable to injection. In a centralized login environment, if a password hash was locally cached for a given user, an authenticated attacker could use this flaw to retrieve it.

SPIP 3.1 before 3.1.10 and 3.2 before 3.2.4 allows authenticated visitors to execute arbitrary code on the host server because var_memotri is mishandled.

The Kubernetes kube-apiserver mistakenly allows access to a cluster-scoped custom resource if the request is made as if the resource were namespaced. Authorizations for the resource accessed in this manner are enforced using roles and role bindings within the namespace, meaning that a user with access only to a resource in one namespace could create, view update or delete the cluster-scoped resource (according to their namespace role privileges). Kubernetes affected versions include versions prior to 1.13.9, versions prior to 1.14.5, versions prior to 1.15.2, and versions 1.7, 1.8, 1.9, 1.10, 1.11, 1.12.

A heap-buffer overflow vulnerability was found in the Redis hyperloglog data structure versions 3.x before 3.2.13, 4.x before 4.0.14 and 5.x before 5.0.4. By carefully corrupting a hyperloglog using the SETRANGE command, an attacker could trick Redis interpretation of dense HLL encoding to write up to 3 bytes beyond the end of a heap-allocated buffer.

Heap-based buffer overflow in chrony before 1.31.1 allows remote authenticated users to cause a denial of service (chronyd crash) or possibly execute arbitrary code by configuring the (1) NTP or (2) cmdmon access with a subnet size that is indivisible by four and an address with a nonzero bit in the subnet remainder.

Smarty is a template engine for PHP, facilitating the separation of presentation (HTML/CSS) from application logic. Prior to versions 3.1.43 and 4.0.3, template authors could run restricted static php methods. Users should upgrade to version 3.1.43 or 4.0.3 to receive a patch.

A code injection flaw was found in the way capacity and utilization imported control files are processed. A remote, authenticated attacker with access to the capacity and utilization feature could use this flaw to execute arbitrary code as the user CFME runs as.

A directory traversal flaw in SquirrelMail 1.4.22 allows an authenticated attacker to exfiltrate (or potentially delete) files from the hosting server, related to ../ in the att_local_name field in Deliver.class.php.

ManageIQ in CloudForms before 4.1 allows remote authenticated users to execute arbitrary code.

In ConsoleKit before 0.4.2, an intended security policy restriction bypass was found. This flaw allows an authenticated system user to escalate their privileges by initiating a remote VNC session.

An authorization flaw was found in Foreman Ansible. An authenticated attacker with certain permissions to create and run Ansible jobs can access hosts through job templates. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

Red Hat OpenShift Enterprise 3.2 and OpenShift Origin allow remote authenticated users to execute commands with root privileges by changing the root password in an sti builder image.

The x86 emulator in KVM 83 does not use the Current Privilege Level (CPL) and I/O Privilege Level (IOPL) in determining the memory access available to CPL3 code, which allows guest OS users to cause a denial of service (guest OS crash) or gain privileges on the guest OS by leveraging access to a (1) IO port or (2) MMIO region, a related issue to CVE-2010-0306.

xymond in Xymon 4.1.x, 4.2.x, and 4.3.x before 4.3.25 allow remote authenticated users to execute arbitrary commands via shell metacharacters in the adduser_name argument in (1) web/useradm.c or (2) web/chpasswd.c.

The Quagga BGP daemon (bgpd) prior to version 1.2.3 can double-free memory when processing certain forms of UPDATE message, containing cluster-list and/or unknown attributes. A successful attack could cause a denial of service or potentially allow an attacker to execute arbitrary code.

MIT krb5 1.6 or later allows an authenticated kadmin with permission to add principals to an LDAP Kerberos database to cause a denial of service (NULL pointer dereference) or bypass a DN container check by supplying tagged data that is internal to the database module.

Condor 6.5.4 through 7.2.4, 7.3.x, and 7.4.0, as used in MRG, Grid for MRG, and Grid Execute Node for MRG, allows remote authenticated users to queue jobs as an arbitrary user, and thereby gain privileges, by using a Condor command-line tool to modify an unspecified job attribute.

The oarsh script in OAR before 2.5.7 allows remote authenticated users of a cluster to obtain sensitive information and possibly gain privileges via vectors related to OpenSSH options.

The setGlobalContext method in org/apache/naming/factory/ResourceLinkFactory.java in Apache Tomcat 7.x before 7.0.68, 8.x before 8.0.31, and 9.x before 9.0.0.M3 does not consider whether ResourceLinkFactory.setGlobalContext callers are authorized, which allows remote authenticated users to bypass intended SecurityManager restrictions and read or write to arbitrary application data, or cause a denial of service (application disruption), via a web application that sets a crafted global context.