An issue was discovered in Zulip Server before 3.4. A bug in the implementation of replies to messages sent by outgoing webhooks to private streams meant that an outgoing webhook bot could be used to send messages to private streams that the user was not intended to be able to send messages to.

An issue was discovered in Zulip Server before 3.4. A bug in the implementation of the can_forge_sender permission (previously is_api_super_user) resulted in users with this permission being able to send messages appearing as if sent by a system bot, including to other organizations hosted by the same Zulip installation.

In the topic moving API in Zulip Server 3.x before 3.4, organization administrators were able to move messages to streams in other organizations hosted by the same Zulip installation.

Zulip is an open-source team collaboration tool. A vulnerability in version 8.0 is similar to CVE-2023-32677, but applies to multi-use invitations, not single-use invitation links as in the prior CVE. Specifically, it applies when the installation has configured non-admins to be able to invite users and create multi-use invitations, and has also configured only admins to be able to invite users to streams. As in CVE-2023-32677, this does not let users invite new users to arbitrary streams, only to streams that the inviter can already see. Version 8.1 fixes this issue. As a workaround, administrators can limit sending of invitations down to users who also have the permission to add users to streams.

Zulip is an open-source team collaboration tool with unique topic-based threading. Zulip administrators can configure Zulip to limit who can add users to streams, and separately to limit who can invite users to the organization. In Zulip Server 6.1 and below, the UI which allows a user to invite a new user also allows them to set the streams that the new user is invited to -- even if the inviting user would not have permissions to add an existing user to streams. While such a configuration is likely rare in practice, the behavior does violate security-related controls. This does not let a user invite new users to streams they cannot see, or would not be able to add users to if they had that general permission. This issue has been addressed in version 6.2. Users are advised to upgrade. Users unable to upgrade may limit sending of invitations down to users who also have the permission to add users to streams.

Zulip is an open-source team collaboration tool with unique topic-based threading. In the event that 1: `ZulipLDAPAuthBackend` and an external authentication backend (any aside of `ZulipLDAPAuthBackend` and `EmailAuthBackend`) are the only ones enabled in `AUTHENTICATION_BACKENDS` in `/etc/zulip/settings.py` and 2: The organization permissions don't require invitations to join. An attacker can create a new account in the organization with an arbitrary email address in their control that's not in the organization's LDAP directory. The impact is limited to installations which have this specific combination of authentication backends as described above in addition to having `Invitations are required for joining this organization` organization permission disabled. This issue has been addressed in version 6.2. Users are advised to upgrade. Users unable to upgrade may enable the `Invitations are required for joining this organization` organization permission to prevent this issue.

Zulip is an open source team chat tool. Due to an incorrect authorization check in Zulip Server 5.4 and earlier, a member of an organization could craft an API call that grants organization administrator privileges to one of their bots. The vulnerability is fixed in Zulip Server 5.5. Members who don’t own any bots, and lack permission to create them, can’t exploit the vulnerability. As a workaround for the vulnerability, an organization administrator can restrict the `Who can create bots` permission to administrators only, and change the ownership of existing bots.

Zulip Desktop before 5.0.0 allows attackers to perform recording via the webcam and microphone due to a missing permission request handler.

Zulip is an open-source team collaboration tool with topic-based threading that combines email and chat. Users who used to be subscribed to a private stream and have been removed from it since retain the ability to edit messages/topics, move messages to other streams, and delete messages that they used to have access to, if other relevant organization permissions allow these actions. For example, a user may be able to edit or delete their old messages they posted in such a private stream. An administrator will be able to delete old messages (that they had access to) from the private stream. This issue was fixed in Zulip Server version 7.3.

An issue was discovered in MediaWiki before 1.35.5, 1.36.x before 1.36.3, and 1.37.x before 1.37.1. It is possible to use action=mcrundo followed by action=mcrrestore to replace the content of any arbitrary page (that the user doesn't have edit rights for). This applies to any public wiki, or a private wiki that has at least one page set in $wgWhitelistRead.

A vulnerability in the web interface of Cisco Prime Collaboration Provisioning Software (prior to Release 12.1) could allow an authenticated, remote attacker to delete any file from an affected system. The vulnerability exists because the affected software does not perform proper input validation of HTTP requests and fails to apply role-based access controls (RBACs) to requested HTTP URLs. An attacker could exploit this vulnerability by sending a crafted HTTP request that uses directory traversal techniques to submit a path to a desired file location on an affected system. A successful exploit could allow the attacker to delete any file from the system. Cisco Bug IDs: CSCvc99597.

A vulnerability was found in Campcodes Online Laundry Management System 1.0. It has been classified as problematic. Affected is an unknown function of the file admin_class.php. The manipulation of the argument type with the input 1 leads to improper authorization. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263940.

Techno - Portfolio Management Panel through 2017-11-16 does not check authorization for panel/portfolio.php?action=delete requests that remove feedback.

Affected versions of Atlassian Jira Server and Data Center allow authenticated yet non-administrator remote attackers to edit the File Replication settings via a Broken Access Control vulnerability in the `ReplicationSettings!default.jspa` endpoint. The affected versions are before version 8.6.0, from version 8.7.0 before 8.13.12, and from version 8.14.0 before 8.20.1.

The controller of the Open Build Service API prior to version 2.4.4 is missing a write permission check, allowing an authenticated attacker to add or remove user roles from packages and/or project meta data.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to make unauthorized changes to the system configuration. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow a user with read-only privileges to change critical system configurations using administrator privileges.

The Stripe for WooCommerce WordPress plugin is missing a capability check on the save() function found in the ~/includes/admin/class-wc-stripe-admin-user-edit.php file that makes it possible for attackers to configure their account to use other site users unique STRIPE identifier and make purchases with their payment accounts. This affects versions 3.0.0 - 3.3.9.

The Ninja Forms WordPress plugin is vulnerable to arbitrary email sending via the trigger_email_action function found in the ~/includes/Routes/Submissions.php file, in versions up to and including 3.5.7. This allows authenticated attackers to send arbitrary emails from the affected server via the /ninja-forms-submissions/email-action REST API which can be used to socially engineer victims.

Nextcloud Richdocuments in an open source self hosted online office. Nextcloud uses the WOPI ("Web Application Open Platform Interface") protocol to communicate with the Collabora Editor, the communication between these two services was not protected by a credentials or IP check. Whilst this does not result in gaining access to data that the user has not yet access to, it can result in a bypass of any enforced watermark on documents as described on the [Nextcloud Virtual Data Room](https://nextcloud.com/virtual-data-room/) website and [our documentation](https://portal.nextcloud.com/article/nextcloud-and-virtual-data-room-configuration-59.html). The Nextcloud Richdocuments releases 3.8.3 and 4.2.0 add an additional admin settings for an allowlist of IP addresses that can access the WOPI API. We recommend upgrading and configuring the allowlist to a list of Collabora servers. There is no known workaround. Note that this primarily results a bypass of any configured watermark or download protection using File Access Control. If you do not require or rely on these as a security feature no immediate action is required on your end.

XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. In versions prior to 11.10.13, 12.6.7, and 12.10.2, a user disabled on a wiki using email verification for registration canouldre-activate themself by using the activation link provided for his registration. The problem has been patched in the following versions of XWiki: 11.10.13, 12.6.7, 12.10.2, 13.0. It is possible to workaround the issue by resetting the `validkey` property of the disabled XWiki users. This can be done by editing the user profile with object editor.

An issue was discovered in MediaWiki before 1.31.12 and 1.32.x through 1.35.x before 1.35.2. ContentModelChange does not check if a user has correct permissions to create and set the content model of a nonexistent page.

SAP Focused RUN versions 200, 300, does not perform necessary authorization checks for an authenticated user, which allows a user to call the oData service and manipulate the activation for the SAP EarlyWatch Alert service data collection and sending to SAP without the intended authorization.

The Enqueue Anything WordPress plugin through 1.0.1 does not have authorisation and CSRF checks in the remove_asset AJAX action, and does not ensure that the item to be deleted is actually an asset. As a result, low privilege users such as subscriber could delete arbitrary assets, as well as put arbitrary posts in the trash.

The Contact Form Advanced Database WordPress plugin through 1.0.8 does not have any authorisation as well as CSRF checks in its delete_cf7_data and export_cf7_data AJAX actions, available to any authenticated users, which could allow users with a role as low as subscriber to call them. The delete_cf7_data would lead to arbitrary metadata deletion, as well as PHP Object Injection if a suitable gadget chain is present in another plugin, as user data is passed to the maybe_unserialize() function without being first validated.

The Logo Showcase with Slick Slider WordPress plugin before 1.2.5 does not have CSRF and authorisation checks in the lswss_save_attachment_data AJAX action, allowing any authenticated users, such as Subscriber, to change title, description, alt text, and URL of arbitrary uploaded media.

The EventCalendar WordPress plugin before 1.1.51 does not have proper authorisation and CSRF checks in the add_calendar_event AJAX actions, allowing users with a role as low as subscriber to create events

Improper Authorization vulnerability in Gallagher Command Centre Server allows macro overrides to be performed by an unprivileged Command Centre Operator. This issue affects: Gallagher Command Centre 8.40 versions prior to 8.40.1888 (MR3); 8.30 versions prior to 8.30.1359 (MR3); 8.20 versions prior to 8.20.1259 (MR5); version 8.10 and prior versions.

An improper access control vulnerability was identified in GitHub Enterprise Server that allowed authenticated users of the instance to gain write access to unauthorized repositories via specifically crafted pull requests and REST API requests. An attacker would need to be able to fork the targeted repository, a setting that is disabled by default for organization owned private repositories. Branch protections such as required pull request reviews or status checks would prevent unauthorized commits from being merged without further review or validation. This vulnerability affected all versions of GitHub Enterprise Server since 2.4.21 and was fixed in versions 2.20.24, 2.21.15, 2.22.7 and 3.0.1. This vulnerability was reported via the GitHub Bug Bounty program.

Missing Authorization vulnerability in Micro Focus Application Automation Tools Plugin - Jenkins plugin. The vulnerability affects version 6.7 and earlier versions. The vulnerability could allow access without permission checks.

The RegistrationMagic plugin through 4.6.0.3 for WordPress allows remote authenticated users (with minimal privileges) to send arbitrary emails on behalf of the site via class_rm_user_services.php send_email_user_view.

A vulnerability classified as problematic has been found in SourceCodester Hospital Management System 1.0. This affects an unknown part of the file /vm/patient/delete-account.php. The manipulation of the argument id leads to improper authorization. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

ajax/profile-picture-upload.php in Bludit 3.10.0 allows authenticated users to change other users' profile pictures.

SAP NetWeaver AS ABAP (Banking Services), versions - 710, 711, 740, 750, 751, 752, 75A, 75B, 75C, 75D, 75E, does not perform necessary authorization checks for an authenticated user due to Missing Authorization Check, allowing wrong and unexpected change of individual conditions by a malicious user leading to wrong prices.

A vulnerability in the External RESTful Services (ERS) API of the Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to generate arbitrary certificates signed by the Internal Certificate Authority (CA) Services on ISE. This vulnerability is due to an incorrect implementation of role-based access control (RBAC). An attacker could exploit this vulnerability by crafting a specific HTTP request with administrative credentials. A successful exploit could allow the attacker to generate a certificate that is signed and trusted by the ISE CA with arbitrary attributes. The attacker could use this certificate to access other networks or assets that are protected by certificate authentication.

The insert-or-embed-articulate-content-into-wordpress plugin before 4.29991 for WordPress has insufficient restrictions on deleting or renaming by a Subscriber.

A missing permission check in Jenkins RapidDeploy Plugin 4.1 and earlier allows attackers with Overall/Read permission to connect to an attacker-specified web server.

The LoginPress plugin before 1.1.4 for WordPress has no capability check for updates to settings.

core/api/user.go in Harbor 1.7.0 through 1.8.2 allows non-admin users to create admin accounts via the POST /api/users API, when Harbor is setup with DB as authentication backend and allow user to do self-registration. Fixed version: v1.7.6 v1.8.3. v.1.9.0. Workaround without applying the fix: configure Harbor to use non-DB authentication backend such as LDAP.

The Rank Math SEO plugin 1.0.27 for WordPress allows non-admin users to reset the settings via the wp-admin/admin-post.php reset-cmb parameter.

The WorkflowResource class removeStatus method in Jira before version 7.13.12, from version 8.0.0 before version 8.4.3, and from version 8.5.0 before version 8.5.2 allows authenticated remote attackers who do not have project administration access to remove a configured issue status from a project via a missing authorisation check.

A vulnerability was found in Moodle affecting 3.7 to 3.7.1, 3.6 to 3.6.5, 3.5 to 3.5.7 and earlier unsupported versions, where users with the capability to create courses were assigned as a teacher in those courses, regardless of whether they had the capability to be automatically assigned that role.

Jenkins Proxmox Plugin 0.7.0 and earlier does not perform a permission check in several HTTP endpoints, allowing attackers with Overall/Read permission to connect to an attacker-specified host using attacker-specified username and password (perform a connection test), disable SSL/TLS validation for the entire Jenkins controller JVM as part of the connection test (see CVE-2022-28142), and test a rollback with attacker-specified parameters.

Gitlab Community Edition version 10.3 is vulnerable to an improper authorization issue in the deployment keys component resulting in unauthorized use of deployment keys by guest users.

Jenkins Multijob plugin version 1.25 and earlier did not check permissions in the Resume Build action, allowing anyone with Job/Read permission to resume the build.

Jenkins Favorite Plugin 2.1.4 and older does not perform permission checks when changing favorite status, allowing any user to set any other user's favorites

A vulnerability was found in jerryshensjf JPACookieShop 蛋糕商城JPA版 1.0 and classified as critical. This issue affects the function updateGoods of the file GoodsController.java. The manipulation leads to authorization bypass. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A missing permission check in Jenkins Rundeck Plugin allows attackers with Overall/Read permission to connect to an attacker-specified URL using attacker-specified credentials.

A missing permission check in Jenkins Netsparker Cloud Scan Plugin 1.1.5 and older in the NCScanBuilder.DescriptorImpl#doValidateAPI form validation method allowed attackers with Overall/Read permission to initiate a connection to an attacker-specified server.

A missing permission check in Jenkins Oracle Cloud Infrastructure Compute Classic Plugin allows attackers with Overall/Read permission to connect to an attacker-specified URL using attacker-specified credentials.

A missing permission check in Jenkins Audit to Database Plugin in the DbAuditPublisherDescriptorImpl#doTestJdbcConnection form validation method allows attackers with Overall/Read permission to initiate a connection to an attacker-specified server.