A vulnerability has been identified in CP 1604 (All versions), CP 1616 (All versions). An attacker with network access to port 23/tcp could extract internal communication data or cause a Denial-of-Service condition. Successful exploitation requires network access to a vulnerable device. At the time of advisory publication no public exploitation of this vulnerability was known.

A buffer over-read vulnerability exists in Wibu-Systems CodeMeter versions < 7.21a. An unauthenticated remote attacker can exploit this issue to disclose heap memory contents or crash the CodeMeter Runtime Server.

An issue was discovered in uIP 1.0, as used in Contiki 3.0 and other products. When the Urgent flag is set in a TCP packet, and the stack is configured to ignore the urgent data, the stack attempts to use the value of the Urgent pointer bytes to separate the Urgent data from the normal data, by calculating the offset at which the normal data should be present in the global buffer. However, the length of this offset is not checked; therefore, for large values of the Urgent pointer bytes, the data pointer can point to memory that is way beyond the data buffer in uip_process in uip.c.

The monitor barrier of the affected products insufficiently blocks data from being forwarded over the mirror port into the mirrored network. An attacker could use this behavior to transmit malicious packets to systems in the mirrored network, possibly influencing their configuration and runtime behavior.

A vulnerability has been identified in Capital Embedded AR Classic 431-422 (All versions), Capital Embedded AR Classic R20-11 (All versions < V2303), PLUSCONTROL 1st Gen (All versions), SIMOTICS CONNECT 400 (All versions < V0.5.0.0), SIMOTICS CONNECT 400 (All versions < V1.0.0.0). The total length of an ICMP payload (set in the IP header) is unchecked. This may lead to various side effects, including Information Leak and Denial-of-Service conditions, depending on the network buffer organization in memory. (FSMD-2021-0007)

A vulnerability has been identified in Capital Embedded AR Classic 431-422 (All versions), Capital Embedded AR Classic R20-11 (All versions < V2303), PLUSCONTROL 1st Gen (All versions), SIMOTICS CONNECT 400 (All versions < V0.5.0.0), SIMOTICS CONNECT 400 (All versions < V1.0.0.0). The total length of an TCP payload (set in the IP header) is unchecked. This may lead to various side effects, including Information Leak and Denial-of-Service conditions, depending on the network buffer organization in memory. (FSMD-2021-0017)

A vulnerability has been identified in Capital Embedded AR Classic 431-422 (All versions), Capital Embedded AR Classic R20-11 (All versions < V2303), PLUSCONTROL 1st Gen (All versions). The total length of an UDP payload (set in the IP header) is unchecked. This may lead to various side effects, including Information Leak and Denial-of-Service conditions, depending on a user-defined applications that runs on top of the UDP protocol. (FSMD-2021-0006)

A vulnerability has been identified in Capital Embedded AR Classic 431-422 (All versions), Capital Embedded AR Classic R20-11 (All versions < V2303), PLUSCONTROL 1st Gen (All versions), SIMOTICS CONNECT 400 (All versions < V0.5.0.0). Malformed TCP packets with a corrupted SACK option leads to Information Leaks and Denial-of-Service conditions. (FSMD-2021-0015)

A vulnerability has been identified in Opcenter Execution Discrete (All versions < V3.2), Opcenter Execution Foundation (All versions < V3.2), Opcenter Execution Process (All versions < V3.2), Opcenter Intelligence (All versions < V3.3), Opcenter Quality (All versions < V11.3), Opcenter RD&L (V8.0), SIMATIC IT LMS (All versions < V2.6), SIMATIC IT Production Suite (All versions < V8.0), SIMATIC Notifier Server for Windows (All versions), SIMATIC PCS neo (All versions < V3.0 SP1), SIMATIC STEP 7 (TIA Portal) V15 (All versions < V15.1 Update 5), SIMATIC STEP 7 (TIA Portal) V16 (All versions < V16 Update 2), SIMOCODE ES V15.1 (All versions < V15.1 Update 4), SIMOCODE ES V16 (All versions < V16 Update 1), Soft Starter ES V15.1 (All versions < V15.1 Update 3), Soft Starter ES V16 (All versions < V16 Update 1). Sending multiple specially crafted packets to the affected service could cause a partial remote denial-of-service, that would cause the service to restart itself. On some cases the vulnerability could leak random information from the remote service.

A vulnerability has been identified in Solid Edge SE2021 (All Versions < SE2021MP7). An XML external entity injection vulnerability in the underlying XML parser could cause the affected application to disclose arbitrary files to remote attackers by loading a specially crafted xml file.

When opening a specially crafted 3DXML file, the application containing Datakit Software libraries CatiaV5_3dRead, CatiaV6_3dRead, Step3dRead, Ug3dReadPsr, Jt3dReadPsr modules in KeyShot Versions v10.1 and prior could disclose arbitrary files to remote attackers. This is because of the passing of specially crafted content to the underlying XML parser without taking proper restrictions such as prohibiting an external DTD.

A vulnerability has been identified in Polarion ALM (All versions < V22R2). The application contains a XML External Entity Injection (XXE) vulnerability. This could allow an attacker to view files on the application server filesystem.

A vulnerability has been identified in Teamcenter V12.4 (All versions < V12.4.0.13), Teamcenter V13.0 (All versions < V13.0.0.9). The application contains a XML External Entity Injection (XXE) vulnerability. This could allow an attacker to view files on the application server filesystem.

A vulnerability has been identified in Siemens OPC UA Modelling Editor (SiOME) (All versions < V2.8). Affected products suffer from a XML external entity (XXE) injection vulnerability. This vulnerability could allow an attacker to interfere with an application's processing of XML data and read arbitrary files in the system.

A vulnerability has been identified in Teamcenter V12.4 (All versions < V12.4.0.8), Teamcenter V13.0 (All versions < V13.0.0.7), Teamcenter V13.1 (All versions < V13.1.0.5), Teamcenter V13.2 (All versions < 13.2.0.2). The application contains a XML External Entity Injection (XXE) vulnerability. This could allow an attacker to view files on the application server filesystem.

A vulnerability has been identified in Solid Edge SE2020 (All Versions < SE2020MP13), Solid Edge SE2021 (All Versions < SE2021MP3). When opening a specially crafted SEECTCXML file, the application could disclose arbitrary files to remote attackers. This is because of the passing of specially crafted content to the underlying XML parser without taking proper restrictions such as prohibiting an external dtd. (ZDI-CAN-11923)

A vulnerability has been identified in JT2Go (All versions < V13.1.0), Teamcenter Visualization (All versions < V13.1.0). When opening a specially crafted xml file, the application could disclose arbitrary files to remote attackers. This is because of the passing of specially crafted content to the underlying XML parser without taking proper restrictions such as prohibiting an external dtd. (ZDI-CAN-11890)

An improper restriction of XML external entity reference vulnerability in the parser of XML responses of FortiPortal before 6.0.6 may allow an attacker who controls the producer of XML reports consumed by FortiPortal to trigger a denial of service or read arbitrary files from the underlying file system by means of specifically crafted XML documents.

XML external entity (XXE) vulnerability in the Configuration Wizard in SAP NetWeaver Java AS 7.1 through 7.5 allows remote attackers to cause a denial of service, conduct SMB Relay attacks, or access arbitrary files via a crafted XML request to _tc~monitoring~webservice~web/ServerNodesWSService, aka SAP Security Note 2235994.

An XXE vulnerability within WireMock before 2.16.0 allows a remote unauthenticated attacker to access local files and internal resources and potentially cause a Denial of Service.

IBM Single Sign On for Bluemix could allow a remote attacker to obtain sensitive information, caused by a XML external entity (XXE) error when processing XML data by the XML parser. A remote attacker could exploit this vulnerability to read arbitrary files on the system or cause a denial of service.

XXE in GE Proficy Cimplicity GDS versions 9.0 R2, 9.5, 10.0

OCS Inventory 2.4.1 lacks a proper XML parsing configuration, allowing the use of external entities. This issue can be exploited by an attacker sending a crafted HTTP request in order to exfiltrate information or cause a Denial of Service.

" Security vulnerability in HCL Commerce Management Center allowing XML external entity (XXE) injection"

IBM Content Navigator 2.0 and 3.0 is vulnerable to a XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 137449.

A External Entity Reference ('XXE') vulnerability in SUSE Linux SMT allows remote attackers to read data from the server or cause DoS by referencing blocking elements. Affected releases are SUSE Linux SMT: versions prior to 3.0.37.

An XXE vulnerability in the OPC UA Java and .NET Legacy Stack can allow remote attackers to trigger a denial of service.

IBM Operational Decision Management 8.5, 8.6, 8.7, 8.8, and 8.9 is vulnerable to a XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 150170.

IBM InfoSphere Information Server 9.1, 11.3, 11.5, and 11.7 is vulnerable to a XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 147630.

A remote XML external entity (XXE) vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.9, 6.7.14-HF1. Aruba has released patches for Aruba ClearPass Policy Manager that address this security vulnerability.

XML External Entity (XXE) vulnerability in the web service in Dialogic PowerMedia XMS before 3.5 SU2 allows remote attackers to read arbitrary files or cause a denial of service (resource consumption).

Accusoft PrizmDoc HTML5 Document Viewer before 13.5 contains an XML external entity (XXE) vulnerability, allowing an attacker to read arbitrary files or cause a denial of service (resource consumption).

Osmand through 2.0.0 allow XXE because of binary/BinaryMapIndexReader.java.

Multiple XML external entity (XXE) vulnerabilities in the (1) CCRC WAN Server / CM Server, (2) Perl CC/CQ integration trigger scripts, (3) CMAPI Java interface, (4) ClearCase remote client, and (5) CMI and OSLC-based ClearQuest integrations components in IBM Rational ClearCase 7.1.0.x, 7.1.1.x, 7.1.2 through 7.1.2.13, 8.0 through 8.0.0.10, and 8.0.1 through 8.0.1.3 allow remote attackers to cause a denial of service or access other servers via crafted XML data. IBM X-Force ID: 92263.

SRS Policy Manager 6.X is affected by an XML External Entity Injection (XXE) vulnerability due to a misconfigured XML parser that processes user-supplied DTD input without sufficient validation. A remote unauthenticated attacker can potentially exploit this vulnerability to read system files as a non-root user and may be able to temporarily disrupt the ESRS service.

IBM WebSphere Application Server 8.0, 8.5, 9.0, and Liberty Java Batch is vulnerable to an XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 197793.

IBM WebSphere Application Server 8.0, 8.5, and 9.0 is vulnerable to a XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 196648.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 is vulnerable to a XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 196649.

OpenPNE 3 versions 3.8.7, 3.6.11, 3.4.21.1, 3.2.7.6, 3.0.8.5 has an External Entity Injection Vulnerability

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 is vulnerable to an XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 194882.

IBM Qradar SIEM 7.3.0 to 7.3.3 Patch 8 and 7.4.0 to 7.4.3 GA is vulnerable to an XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 196073.

The NetIQ Identity Manager Plugins before 4.6.1 contained various XML External XML Entity (XXE) handling flaws that could be used by attackers to leak information or cause denial of service attacks.

XXE vulnerability exists in the Metasys family of product Web Services which has the potential to facilitate DoS attacks or harvesting of ASCII server files. This affects Johnson Controls' Metasys Application and Data Server (ADS, ADS-Lite) versions 10.1 and prior; Metasys Extended Application and Data Server (ADX) versions 10.1 and prior; Metasys Open Data Server (ODS) versions 10.1 and prior; Metasys Open Application Server (OAS) version 10.1; Metasys Network Automation Engine (NAE55 only) versions 9.0.1, 9.0.2, 9.0.3, 9.0.5, 9.0.6; Metasys Network Integration Engine (NIE55/NIE59) versions 9.0.1, 9.0.2, 9.0.3, 9.0.5, 9.0.6; Metasys NAE85 and NIE85 versions 10.1 and prior; Metasys LonWorks Control Server (LCS) versions 10.1 and prior; Metasys System Configuration Tool (SCT) versions 13.2 and prior; Metasys Smoke Control Network Automation Engine (NAE55, UL 864 UUKL/ORD-C100-13 UUKLC 10th Edition Listed) version 8.1.

IBM Cognos Controller 10.4.0, 10.4.1, and 10.4.2 is vulnerable to an XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 190838.

An XXE vulnerability in JnlpSupport in Yet Another Java Service Wrapper (YAJSW) 12.14, as used in NSA Ghidra and other products, allows attackers to exfiltrate data from remote hosts and potentially cause denial-of-service.

SAP Commerce, versions - 6.6, 6.7, 1808, 1811, 1905, does not process XML input securely in the Rest API from Servlet xyformsweb, leading to Missing XML Validation. This affects confidentiality and availability (partially) of SAP Commerce.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 is vulnerable to an XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 192025.

IBM Cognos Controller 10.4.0, 10.4.1, and 10.4.2 is vulnerable to an XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 190839.

IBM Sterling External Authentication Server 6.0.1, 6.0.0, 2.4.3.2, and 2.4.2 and IBM Sterling Secure Proxy 6.0.1, 6.0.0, 3.4.3, and 3.4.2 are vulnerable to an XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 181482.

IBM Maximo Asset Management 7.6.0.1 and 7.6.0.2 is vulnerable to an XML External Entity Injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources. IBM X-Force ID: 181484.