The Dynamic Host Configuration Protocol (DHCP) relay subsystem of Cisco IOS and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system.
Apply updates per vendor instructions.
Multiple SSH2 servers and clients do not properly handle lists with empty elements or strings, which may allow remote attackers to cause a denial of service or possibly execute arbitrary code, as demonstrated by the SSHredder SSH protocol test suite.
Cisco UCS Central Software before 1.3(1a) allows remote attackers to execute arbitrary commands via a crafted HTTP request, aka Bug ID CSCut46961.
The web server on Cisco DPC3010, DPC3212, DPC3825, DPC3925, DPQ3925, EPC3010, EPC3212, EPC3825, and EPC3925 Wireless Residential Gateway products allows remote attackers to execute arbitrary code via a crafted HTTP request, aka Bug ID CSCup40808.
Heap-based buffer overflow in Cisco TelePresence TC Software 4.x through 6.x before 6.0.1 and TE Software 4.x and 6.0.x before 6.0.2 allows remote attackers to execute arbitrary code via crafted SIP packets, aka Bug ID CSCud81796.
The web interface in Cisco Secure Access Control System (ACS) 5.x before 5.4 Patch 3 allows remote attackers to execute arbitrary operating-system commands via a request to this interface, aka Bug ID CSCue65962.
A vulnerability in Cisco Security Manager could allow an unauthenticated, remote attacker to access sensitive information on an affected system. The vulnerability is due to insufficient protection of static credentials in the affected software. An attacker could exploit this vulnerability by viewing source code. A successful exploit could allow the attacker to view static credentials, which the attacker could use to carry out further attacks.
Buffer overflow in the Intelligent Platform Management Interface (IPMI) functionality in the Manager component in Cisco Unified Computing System (UCS) 1.0 and 1.1 before 1.1(1j) and 1.2 before 1.2(1b) allows remote attackers to execute arbitrary code via malformed data in a UDP packet, aka Bug ID CSCtd32371.
Buffer overflow in the telnet server in Cisco Unified IP Phone 7906G, 7911G, 7941G, 7961G, 7970G, and 7971G running SCCP firmware might allow remote authenticated users to execute arbitrary code via a crafted command.
Buffer overflow in Cisco Unified IP Phone 7940, 7940G, 7960, and 7960G running SIP firmware might allow remote attackers to execute arbitrary code via a SIP message with crafted MIME data.
A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to read sensitive memory content, create a denial of service (DoS) condition, or execute arbitrary code as root. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow or buffer overread condition in the Cisco Fabric Services component, which could allow the attacker to read sensitive memory content, create a DoS condition, or execute arbitrary code as root. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69951, CSCve02459, CSCve02461, CSCve02463, CSCve02474, CSCve04859.
Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the authentication, authorization, and accounting (AAA) security services of Cisco IOS XE Software could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device or cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect memory operations that the affected software performs when the software parses a username during login authentication. An attacker could exploit this vulnerability by attempting to authenticate to an affected device. A successful exploit could allow the attacker to execute arbitrary code on the affected device or cause the affected device to reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are running Cisco IOS XE Software Release Fuji 16.7.1 or Fuji 16.8.1 and are configured to use AAA for login authentication. Cisco Bug IDs: CSCvi25380.
Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
Heap-based buffer overflow in the Certificate Trust List (CTL) Provider service (CTLProvider.exe) in Cisco Unified Communications Manager (CUCM) 4.2 before 4.2(3)SR3 and 4.3 before 4.3(1)SR1, and CallManager 4.0 and 4.1 before 4.1(3)SR5c, allows remote attackers to cause a denial of service or execute arbitrary code via a long request.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Buffer overflow in a certain driver in Cisco Security Agent 4.5.1 before 4.5.1.672, 5.0 before 5.0.0.225, 5.1 before 5.1.0.106, and 5.2 before 5.2.0.238 on Windows allows remote attackers to execute arbitrary code via a crafted SMB packet in a TCP session on port (1) 139 or (2) 445.
A vulnerability in the Data-in-Motion (DMo) process installed with the Cisco IOx application environment could allow an unauthenticated, remote attacker to cause a stack overflow that could allow remote code execution with root privileges in the virtual instance running on an affected device. The vulnerability is due to insufficient bounds checking in the DMo process. An attacker could exploit this vulnerability by sending crafted packets that are forwarded to the DMo process for evaluation. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. This vulnerability affects the following Cisco 800 Series Industrial Integrated Services Routers: Cisco IR809 and Cisco IR829. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52330.
A vulnerability in the Secure Sockets Layer (SSL) VPN feature of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device or cause the device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because HTTP requests are not properly validated. An attacker could exploit this vulnerability by sending a crafted HTTP request over an SSL connection to an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device or cause the device to reload, resulting in a DoS condition.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the quality of service (QoS) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges. The vulnerability is due to incorrect bounds checking of certain values in packets that are destined for UDP port 18999 of an affected device. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code on the affected device with elevated privileges. The attacker could also leverage this vulnerability to cause the device to reload, causing a temporary DoS condition while the device is reloading. The malicious packets must be destined to and processed by an affected device. Traffic transiting a device will not trigger the vulnerability. Cisco Bug IDs: CSCvf73881.
A vulnerability in the ACS Report component of Cisco Secure Access Control System (ACS) could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected system. Commands executed by the attacker are processed at the targeted user's privilege level. The vulnerability is due to insufficient validation of the Action Message Format (AMF) protocol. An attacker could exploit this vulnerability by sending a crafted AMF message that contains malicious code to a targeted user. A successful exploit could allow the attacker to execute arbitrary commands on the ACS device. This vulnerability affects all releases of Cisco Secure ACS prior to Release 5.8 Patch 7. Cisco Bug IDs: CSCve69037.
Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient user input validation. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device using root-level privileges. Due to the nature of the vulnerability, only commands without parameters can be executed.
Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Easy Virtual Switching System (VSS) feature of Cisco IOS XE Software for Cisco Catalyst 4500 Series Switches and Cisco Catalyst 4500-X Series Switches could allow an unauthenticated, remote attacker to execute arbitrary code on the underlying Linux operating system of an affected device. The vulnerability is due to incorrect boundary checks of certain values in Easy VSS protocol packets that are destined for an affected device. An attacker could exploit this vulnerability by sending crafted Easy VSS protocol packets to UDP port 5500 while the affected device is in a specific state. When the crafted packet is processed, a buffer overflow condition may occur. A successful exploit could allow the attacker to trigger a denial of service (DoS) condition or execute arbitrary code with root privileges on the underlying Linux operating system of the affected device.
Multiple vulnerabilities in Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker or an authenticated, local attacker to execute arbitrary code on an affected system or cause an affected system to crash and reload. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the web server for Cisco IP Phones could allow an unauthenticated, remote attacker to execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web server of a targeted device. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a DoS condition.
A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the request admin-tech command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the request admin-tech command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69852, CSCvi69856.
Cisco IOS 9.x, 10.x, 11.x, and 12.x and IOS XR 2.0.x, 3.0.x, and 3.2.x allows remote attackers to cause a denial of service or execute arbitrary code via a crafted IP option in the IP header in a (1) ICMP, (2) PIMv2, (3) PGM, or (4) URD packet.
The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices allows remote attackers to execute arbitrary code via a specific (but unstated) exposed service. NOTE: the scope of this CVE does NOT include the concept of "Unnecessary Services" in general; the scope is only a single service that is unnecessarily exposed, leading to remote code execution. The details of that service might be disclosed at a later date.
The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to obtain root access to the Network Processor (NP) Linux system by enabling a TELNET daemon (through CVE-2017-9479 exploitation) and then establishing a TELNET session.
The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to execute arbitrary commands as root by leveraging local network access and connecting to the syseventd server, as demonstrated by copying configuration data into a readable filesystem.
The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows Network Processor (NP) Linux users to obtain root access to the Application Processor (AP) Linux system via shell metacharacters in commands.
Directory traversal vulnerability in processImageSave.jsp in DCNM-SAN Server in Cisco Prime Data Center Network Manager (DCNM) before 6.2(1) allows remote attackers to write arbitrary files via the chartid parameter, aka Bug IDs CSCue77035 and CSCue77036. NOTE: this can be leveraged to execute arbitrary commands by using the JBoss autodeploy functionality.
Cisco Clean Access (CCA) 3.6.x through 3.6.4.2 and 4.0.x through 4.0.3.2 does not properly configure or allow modification of a shared secret authentication key, which causes all devices to have the same shared sercet and allows remote attackers to gain unauthorized access.
A vulnerability in the web interface for Cisco Prime Collaboration Provisioning could allow an unauthenticated, remote attacker to bypass authentication and perform command injection with root privileges. The vulnerability is due to missing security constraints in certain HTTP request methods, which could allow access to files via the web interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the targeted application. This vulnerability affects Cisco Prime Collaboration Provisioning Software Releases prior to 12.1. Cisco Bug IDs: CSCvc98724.
A vulnerability in Cisco Prime Data Center Network Manager (DCNM) Software could allow an unauthenticated, remote attacker to log in to the administrative console of a DCNM server by using an account that has a default, static password. The account could be granted root- or system-level privileges. The vulnerability exists because the affected software has a default user account that has a default, static password. The user account is created automatically when the software is installed. An attacker could exploit this vulnerability by connecting remotely to an affected system and logging in to the affected software by using the credentials for this default user account. A successful exploit could allow the attacker to use this default user account to log in to the affected software and gain access to the administrative console of a DCNM server. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software releases prior to Release 10.2(1) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd95346.
The WIL-A module in Cisco TelePresence VX Clinical Assistant 1.2 before 1.21 changes the admin password to an empty password upon a reboot, which makes it easier for remote attackers to obtain access via the administrative interface, aka Bug ID CSCuj17238.
A vulnerability in the role-based access control (RBAC) functionality of Cisco Prime Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to access sensitive information or execute arbitrary code with root privileges on an affected system. The vulnerability is due to the lack of authentication and authorization mechanisms for a debugging tool that was inadvertently enabled in the affected software. An attacker could exploit this vulnerability by remotely connecting to the debugging tool via TCP. A successful exploit could allow the attacker to access sensitive information about the affected software or execute arbitrary code with root privileges on the affected system. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software Releases 10.1(1) and 10.1(2) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd09961.
The Adaptive Security Device Management (ASDM) remote-management feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.6) does not properly implement the authentication-certificate option, which allows remote attackers to bypass authentication via a TCP session to an ASDM interface, aka Bug ID CSCuh44815.
The SSL implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0 before 9.0(2.6) and 9.1 before 9.1(2) allows remote attackers to bypass authentication, and obtain VPN access or administrative access, via a crafted X.509 client certificate, aka Bug ID CSCuf52468.
A vulnerability in the web-based GUI of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication and execute actions with administrator privileges. The vulnerability is due to a processing error in the role-based access control (RBAC) of URLs. An attacker could exploit this vulnerability by sending API commands via HTTP to a particular URL without prior authentication. An exploit could allow the attacker to perform any actions in Cisco Prime Home with administrator privileges. This vulnerability affects Cisco Prime Home versions from 6.3.0.0 to the first fixed release 6.5.0.1. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCvb49837.
A vulnerability in Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points running Cisco Mobility Express Software could allow an unauthenticated, remote attacker to take complete control of an affected device. The vulnerability is due to the existence of default credentials for an affected device that is running Cisco Mobility Express Software, regardless of whether the device is configured as a master, subordinate, or standalone access point. An attacker who has layer 3 connectivity to an affected device could use Secure Shell (SSH) to log in to the device with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points that are running an 8.2.x release of Cisco Mobility Express Software prior to Release 8.2.111.0, regardless of whether the device is configured as a master, subordinate, or standalone access point. Release 8.2 was the first release of Cisco Mobility Express Software for next generation Cisco Aironet Access Points. Cisco Bug IDs: CSCva50691.