A vulnerability in the statistics collection service of Cisco HyperFlex Software could allow an unauthenticated, remote attacker to inject arbitrary values on an affected device. The vulnerability is due to insufficient authentication for the statistics collection service. An attacker could exploit this vulnerability by sending properly formatted data values to the statistics collection service of an affected device. A successful exploit could allow the attacker to cause the web interface statistics view to present invalid data to users.

A vulnerability in the Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to conduct a HTTP response splitting attack. The vulnerability is due to the failure of the application or its environment to properly sanitize input values. An attacker could exploit this vulnerability by injecting malicious HTTP headers, controlling the response body, or splitting the response into multiple responses. An exploit could allow the attacker to perform cross-site scripting attacks, cross-user defacement, web cache poisoning, and similar exploits. Cisco Bug IDs: CSCvf16705.

A vulnerability in the SNORT detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a file policy that is configured to block the Server Message Block Version 2 (SMB2) protocol. The vulnerability is due to the incorrect detection of an SMB2 file when the detection is based on the length of the file. An attacker could exploit this vulnerability by sending a crafted SMB2 transfer request through the targeted device. A successful exploit could allow the attacker to bypass filters that are configured to block SMB2 traffic. Cisco Bug IDs: CSCve58398.

A vulnerability in the FTP inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass FTP inspection. The vulnerability is due to ineffective flow tracking of FTP traffic. An attacker could exploit this vulnerability by sending crafted FTP traffic through an affected device. A successful exploit could allow the attacker to bypass FTP inspection and successfully complete FTP connections.

Cisco Firepower Management Center before 6.1 and FireSIGHT System Software before 6.1, when certain malware blocking options are enabled, allow remote attackers to bypass malware detection via crafted fields in HTTP headers, aka Bug ID CSCuz44482.

Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured File Policy for HTTP. The vulnerability is due to incorrect detection of modified HTTP packets used in chunked responses. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass a configured File Policy for HTTP packets and deliver a malicious payload.

Duo Network Gateway 1.2.9 and earlier may incorrectly utilize the results of XML DOM traversal and canonicalization APIs in such a way that an attacker may be able to manipulate the SAML data without invalidating the cryptographic signature, allowing the attack to potentially bypass authentication to SAML service providers.

Cisco FireSIGHT Management Center allows remote attackers to bypass the HTTP attack detection feature and avoid triggering Snort IDS rules via an SSL session that is mishandled after decryption, aka Bug ID CSCux53437.

The anti-spam scanner on Cisco Email Security Appliance (ESA) devices 3.3.1-09, 7.5.1-gpl-022, and 8.5.6-074 allows remote attackers to bypass intended e-mail restrictions via a malformed DNS SPF record, aka Bug IDs CSCuu35853 and CSCuu37733.

Cisco IOS XR 5.1.3 allows remote attackers to cause a denial of service (process reload) via crafted MPLS Label Distribution Protocol (LDP) packets, aka Bug ID CSCuu77478.

The Autonomic Networking Infrastructure (ANI) implementation in Cisco IOS allows remote attackers to trigger self-referential adjacencies via a crafted Autonomic Networking (AN) message, aka Bug ID CSCup62157.

Cisco Cloud Web Security before 3.0.1.7 allows remote attackers to bypass intended filtering protection mechanisms by leveraging improper handling of HTTP methods, aka Bug ID CSCut69743.

Cisco ASR 9000 devices with software 5.3.0.BASE do not recognize that certain ACL entries have a single-host constraint, which allows remote attackers to bypass intended network-resource access restrictions by using an address that was not supposed to have been allowed, aka Bug ID CSCur28806.

CRLF injection vulnerability in Cisco TelePresence TC 6.x before 6.3.4 and 7.x before 7.3.3 on Integrator C SX20 devices allows remote attackers to inject arbitrary HTTP headers and conduct HTTP response splitting attacks via a crafted URL, aka Bug ID CSCut79341.

The outlookpa component in Cisco WebEx Meetings Server does not properly validate API input, which allows remote attackers to modify a meeting's invite list via a crafted URL, aka Bug ID CSCuj40254.

The Cisco Media Gateway Controller (MGC) in (1) SC2200 7.4 and earlier, (2) VSC3000 9.1 and earlier, (3) PGW 2200 9.1 and earlier, (4) Billing and Management Server (BAMS) and (5) Voice Services Provisioning Tool (VSPT) runs on default installations of Solaris 2.6 with unnecessary services and without the latest security patches, which allows attackers to exploit known vulnerabilities.

A vulnerability in the antispam protection mechanisms of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass the URL reputation filters on an affected device. This vulnerability is due to improper processing of URLs. An attacker could exploit this vulnerability by crafting a URL in a particular way. A successful exploit could allow the attacker to bypass the URL reputation filters that are configured for an affected device, which could allow malicious URLs to pass through the device.

Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured file policy for HTTP. The vulnerability is due to incorrect handling of specific HTTP header parameters. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass a configured file policy for HTTP packets and deliver a malicious payload.

Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured file policy for HTTP. The vulnerability is due to incorrect handling of an HTTP range header. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass configured file policy for HTTP packets and deliver a malicious payload.

A vulnerability in the malicious file detection and blocking features of Cisco Firepower Management Center and Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass malware detection mechanisms on an affected system. Affected Products: Cisco Firepower Management Center and FireSIGHT System Software are affected when they are configured to use a file policy that has the Block Malware action. More Information: CSCvb27494. Known Affected Releases: 6.0.1.1 6.1.0.

A vulnerability in the out of band (OOB) management interface IP table rule programming for Cisco Application Policy Infrastructure Controller (APIC) could allow an unauthenticated, remote attacker to bypass configured deny entries for specific IP ports. These IP ports would be permitted to the OOB management interface when, in fact, the packets should be dropped. The vulnerability is due to the configuration of specific IP table entries for which there is a programming logic error that results in the IP port being permitted. An attacker could exploit this vulnerability by sending traffic to the OOB management interface on the targeted device. A successful exploit could allow the attacker to bypass configured IP table rules to drop specific IP port traffic. The attacker has no control over the configuration of the device itself. This vulnerability affects Cisco APIC releases prior to the first fixed software Release 4.2(3j).

A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface.

A vulnerability in the Decrypt for End-User Notification configuration parameter of Cisco AsyncOS Software for Cisco Web Security Appliances could allow an unauthenticated, remote attacker to connect to a secure website over Secure Sockets Layer (SSL) or Transport Layer Security (TLS), even if the WSA is configured to block connections to the website. Affected Products: This vulnerability affects Cisco Web Security Appliances if the HTTPS decryption options are enabled and configured for the device to block connections to certain websites. More Information: CSCvb49012. Known Affected Releases: 9.0.1-162 9.1.1-074.

A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass file policies that are configured to block files transmitted to an affected device via the BitTorrent protocol. The vulnerability exists because the affected software does not detect BitTorrent handshake messages correctly. An attacker could exploit this vulnerability by sending a crafted BitTorrent connection request to an affected device. A successful exploit could allow the attacker to bypass file policies that are configured to block files transmitted to the affected device via the BitTorrent protocol. Cisco Bug IDs: CSCve26946.

A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to access sensitive data that could be used to elevate their privileges to administrator. The vulnerability is due to improper implementation of filesystem permissions. An attacker could exploit this vulnerability by logging in to the CLI of an affected device, accessing a specific file, and leveraging this information to authenticate to the NX-API server. A successful exploit could allow an attacker to make configuration changes as administrator. Note: NX-API is disabled by default. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

A vulnerability in the web-based interface of Cisco Unified Communications Manager and Cisco Unified Communications Manager Session Management Edition (SME) could allow an unauthenticated, remote attacker to bypass security restrictions. The vulnerability is due to improper handling of malformed HTTP methods. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected system. A successful exploit could allow the attacker to gain unauthorized access to the system.

The default configuration of Cisco ASA 5500 Series Adaptive Security Appliance (Cisco ASA) 7.0, 7.1, 7.2, 8.0, 8.1, and 8.2 allows portal traffic to access arbitrary backend servers, which might allow remote authenticated users to bypass intended access restrictions and access unauthorized web sites via a crafted URL obfuscated with ROT13 and a certain encoding. NOTE: this issue was originally reported as a vulnerability related to lack of restrictions to URLs listed in the Cisco WebVPN bookmark component, but the vendor states that "The bookmark feature is not a security feature."

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a missing authentication check in an API call. An attacker who can send a request to an affected system could cause all currently authenticated users to be logged off. Repeated exploitation could cause the inability to maintain a session in the web-based management portal.

Cisco IOS XR 3.8.1 and earlier allows remote authenticated users to cause a denial of service (process crash) via vectors involving a BGP UPDATE message with many AS numbers prepended to the AS path.

A vulnerability in Cisco IOS ROM Monitor (ROMMON) Software for Cisco Catalyst 6800 Series Switches could allow an unauthenticated, local attacker to bypass Cisco Secure Boot validation checks and load a compromised software image on an affected device. The vulnerability is due to the presence of a hidden command in the affected software. An attacker could exploit this vulnerability by connecting to an affected device via the console, forcing the device into ROMMON mode, and writing a malicious pattern to a specific memory address on the device. A successful exploit could allow the attacker to bypass signature validation checks by Cisco Secure Boot technology and load a compromised software image on the affected device. A compromised software image is any software image that has not been digitally signed by Cisco.

Unspecified vulnerability in the Cisco Wireless LAN Controller (WLC), Cisco Catalyst 6500 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.2.173.0 allows remote authenticated users to gain privileges via unknown vectors, as demonstrated by escalation from the (1) Lobby Admin and (2) Local Management User privilege levels.

A vulnerability in the implementation of a CLI command in Cisco Aironet Access Points (AP) could allow an authenticated, local attacker to overwrite files in the flash memory of the device. This vulnerability is due to insufficient input validation for a specific command. An attacker could exploit this vulnerability by issuing a command with crafted arguments. A successful exploit could allow the attacker to overwrite or create files with data that is already present in other files that are hosted on the affected device.

Cisco Adaptive Security Appliance (ASA) and Cisco PIX security appliance 8.0.x before 8.0(3)9 allows remote attackers to bypass control-plane ACLs for the device via unknown vectors.

A vulnerability in the web management interface of Cisco Prime Collaboration Provisioning (PCP) could allow an authenticated, remote attacker to modify sensitive data that is associated with arbitrary accounts on an affected device. The vulnerability is due to a failure to enforce access restrictions on the Help Desk and User Provisioning roles that are assigned to authenticated users. This failure could allow an authenticated attacker to modify critical attributes of higher-privileged accounts on the device. A successful exploit could allow the attacker to gain elevated privileges on the device. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.1 and prior. Cisco Bug IDs: CSCvd61779.

Multiple vulnerabilities in the web-based management interface of Cisco Finesse could allow an unauthenticated, remote attacker to retrieve a cleartext password from an affected system. Cisco Bug IDs: CSCvg71044.

A vulnerability in the Disk Check Tool (disk-check.sh) for Cisco Wide Area Application Services (WAAS) Software could allow an authenticated, local attacker to elevate their privilege level to root. The attacker must have valid user credentials with super user privileges (level 15) to log in to the device. The vulnerability is due to insufficient validation of script files executed in the context of the Disk Check Tool. An attacker could exploit this vulnerability by replacing one script file with a malicious script file while the affected tool is running. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device. Cisco Bug IDs: CSCvi72673.

A vulnerability in the local status page functionality of the Cisco Meraki MR, MS, MX, Z1, and Z3 product lines could allow an authenticated, remote attacker to modify device configuration files. The vulnerability occurs when handling requests to the local status page. An exploit could allow the attacker to establish an interactive session to the device with elevated privileges. The attacker could then use the elevated privileges to further compromise the device or obtain additional configuration data from the device that is being exploited.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuv91356.

A vulnerability in the NX-API management application programming interface (API) in devices running, or based on, Cisco NX-OS Software could allow an authenticated, remote attacker to execute commands with elevated privileges. The vulnerability is due to a failure to properly validate certain parameters included within an NX-API request. An attacker that can successfully authenticate to the NX-API could submit a request designed to bypass NX-OS role assignment. A successful exploit could allow the attacker to execute commands with elevated privileges. This vulnerability affects the following if configured to use the NX-API feature: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvc73177, CSCve40903, CSCve40911.

A vulnerability in the web interface of Cisco Prime Collaboration Provisioning (PCP) could allow an authenticated, remote attacker to escalate their privileges. The vulnerability is due to insufficient web portal access control checks. An attacker could exploit this vulnerability by modifying an access request. An exploit could allow the attacker to promote their account to any role defined on the system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.2 and prior. Cisco Bug IDs: CSCvc90286.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.

A vulnerability in the Sourcefire tunnel control channel protocol in Cisco Firepower System Software running on Cisco Firepower Threat Defense (FTD) sensors could allow an authenticated, local attacker to execute specific CLI commands with root privileges on the Cisco Firepower Management Center (FMC), or through Cisco FMC on other Firepower sensors and devices that are controlled by the same Cisco FMC. To send the commands, the attacker must have root privileges for at least one affected sensor or the Cisco FMC. The vulnerability exists because the affected software performs insufficient checks for certain CLI commands, if the commands are executed via a Sourcefire tunnel connection. An attacker could exploit this vulnerability by authenticating with root privileges to a Firepower sensor or Cisco FMC, and then sending specific CLI commands to the Cisco FMC or through the Cisco FMC to another Firepower sensor via the Sourcefire tunnel connection. A successful exploit could allow the attacker to modify device configurations or delete files on the device that is running Cisco FMC Software or on any Firepower device that is managed by Cisco FMC.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.

A vulnerability in the Cisco Network Plug and Play server component of Cisco Network Services Orchestrator (NSO) could allow an unauthenticated, remote attacker to gain unauthorized access to configuration data that is stored on an affected NSO system. The vulnerability exists because the Network Plug and Play component performs incomplete validation when configured to use secure unique device identifiers (SUDI) for authentication. An attacker who controls a Cisco device that supports SUDI authentication and has connectivity to an affected NSO system could exploit this vulnerability. The attacker would need to leverage information about the devices that are being registered on the NSO server to send crafted Cisco Network Plug and Play authentication packets to an affected system. A successful exploit could allow the attacker to gain unauthorized access to configuration data for devices that will be managed by the NSO system.

A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753.

A vulnerability in the Cisco Umbrella Enterprise Roaming Client (ERC) could allow an authenticated, local attacker to elevate privileges to Administrator. To exploit the vulnerability, the attacker must authenticate with valid local user credentials. This vulnerability is due to improper implementation of file system permissions, which could allow non-administrative users to place files within restricted directories. An attacker could exploit this vulnerability by placing an executable file within the restricted directory, which when executed by the ERC client, would run with Administrator privileges.

A vulnerability in role-based access control (RBAC) for Cisco NX-OS Software could allow an authenticated, remote attacker to execute CLI commands that should be restricted for a nonadministrative user. The attacker would have to possess valid user credentials for the device. The vulnerability is due to incorrect RBAC privilege assignment for certain CLI commands. An attacker could exploit this vulnerability by authenticating to a device as a nonadministrative user and executing specific commands from the CLI. An exploit could allow the attacker to run commands that should be restricted to administrative users. These commands could modify the configuration or boot image on the device. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd77904.

A vulnerability in the credential reset functionality for Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to gain elevated privileges. The vulnerability is due to a lack of proper input validation. An attacker could exploit this vulnerability by authenticating to the device and sending a crafted HTTP request. A successful exploit could allow the attacker to gain elevated privileges to access functionality that should be restricted. The attacker must have valid user credentials to the device to exploit this vulnerability. Cisco Bug IDs: CSCvf69753.

A vulnerability in the batch provisioning feature of Cisco Prime Collaboration Provisioning could allow an authenticated, remote attacker to escalate privileges to the Administrator level. The vulnerability is due to insufficient authorization enforcement on batch processing. An attacker could exploit this vulnerability by uploading a batch file and having the batch file processed by the system. A successful exploit could allow the attacker to escalate privileges to the Administrator level. Cisco Bug IDs: CSCvd86578.