It was discovered that the Western Digital My Cloud device before 2.30.196 is affected by an authentication bypass vulnerability. An unauthenticated attacker can exploit this vulnerability to authenticate as an admin user without needing to provide a password, thereby gaining full control of the device. (Whenever an admin logs into My Cloud, a server-side session is created that is bound to the user's IP address. After the session is created, it is possible to call authenticated CGI modules by sending the cookie username=admin in the HTTP request. The invoked CGI will check if a valid session is present and bound to the user's IP address.) It was found that it is possible for an unauthenticated attacker to create a valid session without a login. The network_mgr.cgi CGI module contains a command called "cgi_get_ipv6" that starts an admin session -- tied to the IP address of the user making the request -- if the additional parameter "flag" with the value "1" is provided. Subsequent invocation of commands that would normally require admin privileges now succeed if an attacker sets the username=admin cookie.

A vulnerability was discovered in Siemens SiPass integrated (All versions before V2.70) that could allow an attacker with network access to the SiPass integrated server to bypass the authentication mechanism and perform administrative operations.

The TLS session cache in FreeRADIUS 2.1.1 through 2.1.7, 3.0.x before 3.0.14, 3.1.x before 2017-02-04, and 4.0.x before 2017-02-04 fails to reliably prevent resumption of an unauthenticated session, which allows remote attackers (such as malicious 802.1X supplicants) to bypass authentication via PEAP or TTLS.

NetIQ eDirectory before 9.0 SP4 did not enforce login restrictions when "ebaclient" was used, allowing unpermitted access to eDirectory services.

An issue was discovered in SMA Solar Technology products. An attacker can use Sunny Explorer or the SMAdata2+ network protocol to update the device firmware without ever having to authenticate. If an attacker is able to create a custom firmware version that is accepted by the inverter, the inverter is compromised completely. This allows the attacker to do nearly anything: for example, giving access to the local OS, creating a botnet, using the inverters as a stepping stone into companies, etc. NOTE: the vendor reports that this attack has always been blocked by "a final integrity and compatibility check." Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

In OpenBMC 2.9, crafted IPMI messages allow an attacker to bypass authentication and gain full control of the system.

On D-Link DIR-823G devices, ExportSettings.sh, upload_settings.cgi, GetDownLoadSyslog.sh, and upload_firmware.cgi do not require authentication, which allows remote attackers to execute arbitrary code.

In ABB IP GATEWAY 3.39 and prior, by accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access the configuration files and application pages without authentication.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

Hanwha Techwin SRN-4000, SRN-4000 firmware versions prior to SRN4000_v2.16_170401, A specially crafted http request and response could allow an attacker to gain access to the device management page with admin privileges without proper authentication.

An Improper Authentication issue was discovered in Newport XPS-Cx and XPS-Qx. An attacker may bypass authentication by accessing a specific uniform resource locator (URL).

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.

The WS-SP UsernameToken policy in Apache CXF 2.4.5 and 2.5.1 allows remote attackers to bypass authentication by sending an empty UsernameToken as part of a SOAP request.

PostgreSQL versions before 9.2.22, 9.3.18, 9.4.13, 9.5.8 and 9.6.4 are vulnerable to incorrect authentication flaw allowing remote attackers to gain access to database accounts with an empty password.

AIRTAME HDMI dongle with firmware before 2.2.0 allows unauthenticated access to a big part of the management interface. It is possible to extract all information including the Wi-Fi password, reboot, or force a software update at an arbitrary time.

A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995.

On certain Brother devices, authorization is mishandled by including a valid AuthCookie cookie in the HTTP response to a failed login attempt. Affected models are: MFC-J6973CDW MFC-J4420DW MFC-8710DW MFC-J4620DW MFC-L8850CDW MFC-J3720 MFC-J6520DW MFC-L2740DW MFC-J5910DW MFC-J6920DW MFC-L2700DW MFC-9130CW MFC-9330CDW MFC-9340CDW MFC-J5620DW MFC-J6720DW MFC-L8600CDW MFC-L9550CDW MFC-L2720DW DCP-L2540DW DCP-L2520DW HL-3140CW HL-3170CDW HL-3180CDW HL-L8350CDW HL-L2380DW ADS-2500W ADS-1000W ADS-1500W.

An Authentication Bypass (CWE-287) vulnerability in ESMAC (aka Enterprise Server Monitor and Control) in Micro Focus Enterprise Developer and Enterprise Server 2.3 and earlier, 2.3 Update 1 before Hotfix 8, and 2.3 Update 2 before Hotfix 9 allows remote unauthenticated attackers to view and alter configuration information and alter the state of the running product (CWE-275).

FURUNO FELCOM 250 and 500 devices use only client-side JavaScript in login.js for authentication.

Detcon Sitewatch Gateway, all versions without cellular, Passwords are presented in plaintext in a file that is accessible without authentication.

An authentication bypass by capture-replay issue was discovered in Schneider Electric Modicon Modbus Protocol. Sensitive information is transmitted in cleartext in the Modicon Modbus protocol, which may allow an attacker to replay the following commands: run, stop, upload, and download.

Televes COAXDATA GATEWAY 1Gbps devices doc-wifi-hgw_v1.02.0014 4.20 do not check password.shtml authorization, leading to Arbitrary password change.

GbScriptAddUp.asp in Advantech/BroadWin WebAccess before 7.0 does not properly perform authentication, which allows remote attackers to execute arbitrary code via unspecified vectors.

A remote attacker could bypass the Sandstorm organization restriction before build 0.203 via a comma in an email-address field.

An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

In EMC Avamar Server Software 7.3.1-125, 7.3.0-233, 7.3.0-226, 7.2.1-32, 7.2.1-31, 7.2.0-401, an unauthenticated remote attacker may potentially bypass the authentication process to gain access to the system maintenance page. This may be exploited by an attacker to view sensitive information, perform software updates, or run maintenance workflows.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains an Improper Authentication vulnerability that could potentially be exploited by malicious users to compromise the affected system.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains a Java RMI Remote Code Execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.

EMC Isilon InsightIQ 4.1.0, 4.0.1, 4.0.0, 3.2.2, 3.2.1, 3.2.0, 3.1.1, 3.1.0, 3.0.1, 3.0.0 is affected by an authentication bypass vulnerability that could potentially be exploited by attackers to compromise the affected system.

This vulnerability allows remote attackers to bypass authentication on affected installations of Commvault CommCell 11.22.22. Authentication is not required to exploit this vulnerability. The specific flaw exists within the CVSearchService service. The issue results from the lack of proper validation prior to authentication. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-13706.

The ComputePassword function in the Schneider Electric Quantum Ethernet Module on the NOE 771 device (aka the Quantum 140NOE771* module) generates the password for the fwupgrade account by performing a calculation on the MAC address, which makes it easier for remote attackers to obtain access via a (1) ARP request message or (2) Neighbor Solicitation message.

Grafana 2.x, 3.x, and 4.x before 4.6.4 and 5.x before 5.2.3 allows authentication bypass because an attacker can generate a valid "remember me" cookie knowing only a username of an LDAP or OAuth user.

An issue was discovered in OpenAFS before 1.6.23 and 1.8.x before 1.8.2. The backup tape controller (butc) process accepts incoming RPCs but does not require (or allow for) authentication of those RPCs. Handling those RPCs results in operations being performed with administrator credentials, including dumping/restoring volume contents and manipulating the backup database. For example, an unauthenticated attacker can replace any volume's content with arbitrary data.

Sangoma NetBorder / Vega Session Controller before 2.3.12-80-GA allows remote attackers to execute arbitrary commands via the web interface.

Paid To Read Script 2.0.5 has authentication bypass in the admin panel via a direct request, as demonstrated by the admin/viewvisitcamp.php fn parameter and the admin/userview.php uid parameter.

The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

An attacker can log into the local Niagara platform (Niagara AX Framework Versions 3.8 and prior or Niagara 4 Framework Versions 4.4 and prior) using a disabled account name and a blank password, granting the attacker administrator access to the Niagara system.

The UserPro plugin before 4.9.17.1 for WordPress, when used on a site with the "admin" username, allows remote attackers to bypass authentication and obtain administrative access via a "true" value for the up_auto_log parameter in the QUERY_STRING to the default URI.

Sitefinity 5.1, 5.2, 5.3, 5.4, 6.x, 7.x, 8.x, 9.x, and 10.x allow remote attackers to bypass authentication and consequently cause a denial of service on load balanced sites or gain privileges via vectors related to weak cryptography.

An issue was discovered in middleware.py in OpenStack Swauth through 1.2.0 when used with OpenStack Swift through 2.15.1. The Swift object store and proxy server are saving (unhashed) tokens retrieved from the Swauth middleware authentication mechanism to a log file as part of a GET URI. This allows attackers to bypass authentication by inserting a token into an X-Auth-Token header of a new request. NOTE: github.com/openstack/swauth URLs do not mean that Swauth is maintained by an official OpenStack project team.

The check_password function in html/admin/login.php in PacketFence before 3.0.2 allows remote attackers to bypass authentication via an empty password.

Delta Electronics DIAEnergie Version 1.7.5 and prior may allow an attacker to add a new administrative user without being authenticated or authorized, which may allow the attacker to log in and use the device with administrative privileges.

In Android before 2018-01-05 on Qualcomm Snapdragon IoT, Snapdragon Mobile, Snapdragon Automobile APQ8096AU, MDM9206, MDM9650, MSM8996AU, SD 210/SD 212/SD 205, SD 425, SD 430, SD 625, SD 650/52, SD 820, SD 835, it is possible for the XBL loader to skip the authentication of device config.

OneOrZero Action & Information Management System (AIMS) 2.7.0 allows remote attackers to bypass authentication and obtain administrator privileges via a crafted oozimsrememberme cookie.

An issue was discovered in EMC Avamar Server 7.1.x, 7.2.x, 7.3.x, 7.4.x, 7.5.0; EMC NetWorker Virtual Edition (NVE) 9.0.x, 9.1.x, 9.2.x; and EMC Integrated Data Protection Appliance 2.0. A remote unauthenticated malicious user can potentially bypass application authentication and gain unauthorized root access to the affected systems.

Xpress Server in SAP POS does not require authentication for file read and erase operations, daemon shutdown, terminal read operations, or certain attacks on credentials. This is SAP Security Note 2520064.

In versions 8.2.1 through 8.5.2 of Pega Infinity, the password reset functionality for local accounts can be used to bypass local authentication checks.

In Drobo 5N2 4.0.5, all optional applications lack any form of authentication/authorization validation. As a result, any user capable of accessing the device over the network may interact with and control these applications. This not only poses a severe risk to the availability of these applications, but also poses severe risks to the confidentiality and integrity of data stored within the applications and the device itself.

DenyAll WAF before 6.4.1 allows unauthenticated remote attackers to obtain authentication information by making a typeOf=debug request to /webservices/download/index.php, and then reading the iToken field in the reply. This affects DenyAll i-Suite LTS 5.5.0 through 5.5.12, i-Suite 5.6, Web Application Firewall 5.7, and Web Application Firewall 6.x before 6.4.1, with On Premises or AWS/Azure cloud deployments.