xmlStringLenDecodeEntities in parser.c in libxml2 2.9.10 has an infinite loop in a certain end-of-file situation.

A buffer overflow was discovered in libxml2 20904-GITv2.9.4-16-g0741801. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer 'buf' of size 'size'. The variable len is assigned strlen(buf). If the content->type is XML_ELEMENT_CONTENT_ELEMENT, then (i) the content->prefix is appended to buf (if it actually fits) whereupon (ii) content->name is written to the buffer. However, the check for whether the content->name actually fits also uses 'len' rather than the updated buffer length strlen(buf). This allows us to write about "size" many bytes beyond the allocated memory. This vulnerability causes programs that use libxml2, such as PHP, to crash.

libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a stack-based buffer overflow. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer 'buf' of size 'size'. At the end of the routine, the function may strcat two more characters without checking whether the current strlen(buf) + 2 < size. This vulnerability causes programs that use libxml2, such as PHP, to crash.

libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictAddString function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for CVE-2016-1839.

Type confusion in xsltNumberFormatGetMultipleLevel prior to libxslt 1.1.33 could allow attackers to potentially exploit heap corruption via crafted XML data.

libxslt before 1.1.28 allows remote attackers to cause a denial of service (NULL pointer dereference and crash) via an (1) empty match attribute in a XSL key to the xsltAddKey function in keys.c or (2) uninitialized variable to the xsltDocumentFunction function in functions.c.

NULL Pointer Dereference allows attackers to cause a denial of service (or application crash). This only applies when lxml is used together with libxml2 2.9.10 through 2.9.14. libxml2 2.9.9 and earlier are not affected. It allows triggering crashes through forged input data, given a vulnerable code sequence in the application. The vulnerability is caused by the iterwalk function (also used by the canonicalize function). Such code shouldn't be in wide-spread use, given that parsing + iterwalk would usually be replaced with the more efficient iterparse function. However, an XML converter that serialises to C14N would also be vulnerable, for example, and there are legitimate use cases for this code sequence. If untrusted input is received (also remotely) and processed via iterwalk function, a crash can be triggered.

libxml2 2.7.0 and 2.7.1 does not properly handle "predefined entities definitions" in entities, which allows context-dependent attackers to cause a denial of service (memory consumption and application crash), as demonstrated by use of xmllint on a certain XML document, a different vulnerability than CVE-2003-1564 and CVE-2008-3281.

xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak.

xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc->oldNs.

It was found that Red Hat JBoss Core Services erratum RHSA-2016:2957 for CVE-2016-3705 did not actually include the fix for the issue found in libxml2, making it vulnerable to a Denial of Service attack due to a Stack Overflow. This is a regression CVE for the same issue as CVE-2016-3705.

A NULL pointer dereference vulnerability exists in the xpath.c:xmlXPathCompOpEval() function of libxml2 through 2.9.8 when parsing an invalid XPath expression in the XPATH_OP_AND or XPATH_OP_OR case. Applications processing untrusted XSL format inputs with the use of the libxml2 library may be vulnerable to a denial of service attack due to a crash of the application.

The xmlParseElementDecl function in parser.c in libxml2 before 2.9.4 allows context-dependent attackers to cause a denial of service (heap-based buffer underread and application crash) via a crafted file, involving xmlParseName.

The xmlBufAttrSerializeTxtContent function in xmlsave.c in libxml2 allows context-dependent attackers to cause a denial of service (out-of-bounds read and application crash) via a non-UTF-8 attribute value, related to serialization. NOTE: this vulnerability may be a duplicate of CVE-2016-3627.

The (1) xmlParserEntityCheck and (2) xmlParseAttValueComplex functions in parser.c in libxml2 2.9.3 do not properly keep track of the recursion depth, which allows context-dependent attackers to cause a denial of service (stack consumption and application crash) via a crafted XML document containing a large number of nested entity references.

The xmlStringGetNodeList function in tree.c in libxml2 2.9.3 and earlier, when used in recovery mode, allows context-dependent attackers to cause a denial of service (infinite recursion, stack consumption, and application crash) via a crafted XML document.

dict.c in libxml2 allows remote attackers to cause a denial of service (heap-based buffer over-read and application crash) via an unexpected character immediately after the "<!DOCTYPE html" substring in a crafted HTML document.

The xsltStylePreCompute function in preproc.c in libxslt 1.1.28 does not check if the parent node is an element, which allows attackers to cause a denial of service via a crafted XML file, related to a "type confusion" issue.

The xmlParseMisc function in parser.c in libxml2 before 2.9.3 allows context-dependent attackers to cause a denial of service (out-of-bounds heap read) via unspecified vectors related to incorrect entities boundaries and start tags.

Heap-based buffer overflow in the xmlParseXmlDecl function in parser.c in libxml2 before 2.9.3 allows context-dependent attackers to cause a denial of service via unspecified vectors related to extracting errors after an encoding conversion failure.

Heap-based buffer overflow in the xmlDictComputeFastQKey function in dict.c in libxml2 before 2.9.3 allows context-dependent attackers to cause a denial of service via unspecified vectors.

The xsl_ext_function_php function in ext/xsl/xsltprocessor.c in PHP before 5.4.45, 5.5.x before 5.5.29, and 5.6.x before 5.6.13, when libxml2 before 2.9.2 is used, does not consider the possibility of a NULL valuePop return value before proceeding with a free operation after the principal argument loop, which allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a crafted XML document, a different vulnerability than CVE-2015-6837.

parser.c in libxml2 before 2.9.2 does not properly prevent entity expansion even when entity substitution has been disabled, which allows context-dependent attackers to cause a denial of service (CPU consumption) via a crafted XML document containing a large number of nested entity references, a variant of the "billion laughs" attack.

libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictComputeFastKey function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for libxml2 Bug 759398.

libxml2 before 2.8.0 computes hash values without restricting the ability to trigger hash collisions predictably, which allows context-dependent attackers to cause a denial of service (CPU consumption) via crafted XML data.

The xmlreader in libxml allows remote attackers to cause a denial of service (memory consumption) via crafted XML data, related to an XML Entity Expansion (XEE) attack.

parser.c in libxml2 before 2.9.0, as used in Google Chrome before 28.0.1500.71 and other products, allows remote attackers to cause a denial of service (out-of-bounds read) via a document that ends abruptly, related to the lack of certain checks for the XML_PARSER_EOF state.

The xsl_ext_function_php function in ext/xsl/xsltprocessor.c in PHP before 5.4.45, 5.5.x before 5.5.29, and 5.6.x before 5.6.13, when libxml2 before 2.9.2 is used, does not consider the possibility of a NULL valuePop return value before proceeding with a free operation during initial error checking, which allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a crafted XML document, a different vulnerability than CVE-2015-6838.

The xz_decomp function in xzlib.c in libxml2 2.9.8, if --with-lzma is used, allows remote attackers to cause a denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a different vulnerability than CVE-2015-8035.

libxml2 2.9.8, if --with-lzma is used, allows remote attackers to cause a denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a different vulnerability than CVE-2015-8035 and CVE-2018-9251.

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the Bazaar dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-bzr.c by ensuring that backwards parsing cannot occur.

A memory exhaustion vulnerability exists in Asterisk Open Source 13.x before 13.15.1 and 14.x before 14.4.1 and Certified Asterisk 13.13 before 13.13-cert4, which can be triggered by sending specially crafted SCCP packets causing an infinite loop and leading to memory exhaustion (by message logging in that loop).

The ASN.1 parser in strongSwan before 5.5.3 improperly handles CHOICE types when the x509 plugin is enabled, which allows remote attackers to cause a denial of service (infinite loop) via a crafted certificate.

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the DNS dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-dns.c by trying to detect self-referencing pointers.

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the DICOM dissector has an infinite loop. This was addressed in epan/dissectors/packet-dcm.c by validating a length value.

XML External Entity vulnerability in libexpat 2.2.0 and earlier (Expat XML Parser Library) allows attackers to put the parser in an infinite loop using a malformed external entity definition from an external DTD.

Incorrect interaction of the parse_packet() and parse_part_sign_sha256() functions in network.c in collectd 5.7.1 and earlier allows remote attackers to cause a denial of service (infinite loop) of a collectd instance (configured with "SecurityLevel None" and with empty "AuthFile" options) via a crafted UDP packet.

In Wireshark 2.2.0 to 2.2.5 and 2.0.0 to 2.0.11, the WSP dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-wsp.c by adding a length check.

In Wireshark 2.2.0 to 2.2.5 and 2.0.0 to 2.0.11, the SIGCOMP dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-sigcomp.c by correcting a memory-size check.

In Wireshark 2.2.0 to 2.2.5 and 2.0.0 to 2.0.11, the WBXML dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-wbxml.c by adding length validation.

In Wireshark 2.2.0 to 2.2.5, the DOF dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-dof.c by using a different integer data type and adjusting a return value.

It was discovered that a programming error in the processing of HTTPS requests in the Apache Tomcat servlet and JSP engine may result in denial of service via an infinite loop. The denial of service is easily achievable as a consequence of backporting a CVE-2016-6816 fix but not backporting the fix for Tomcat bug 57544. Distributions affected by this backporting issue include Debian (before 7.0.56-3+deb8u8 and 8.0.14-1+deb8u7 in jessie) and Ubuntu.

Unisys ClearPath MCP TCP/IP Networking Services 59.1, 60.0, and 62.0 has an Infinite Loop.

The tcp_splice_read function in net/ipv4/tcp.c in the Linux kernel before 4.9.11 allows remote attackers to cause a denial of service (infinite loop and soft lockup) via vectors involving a TCP packet with the URG flag.

In Wireshark 2.2.0 to 2.2.4 and 2.0.0 to 2.0.10, there is an IAX2 infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-iax2.c by constraining packet lateness.

In Wireshark 2.2.0 to 2.2.3 and 2.0.0 to 2.0.9, the ASTERIX dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-asterix.c by changing a data type to avoid an integer overflow.

Openwsman, versions up to and including 2.6.9, are vulnerable to infinite loop in process_connection() when parsing specially crafted HTTP requests. A remote, unauthenticated attacker can exploit this vulnerability by sending malicious HTTP request to cause denial of service to openwsman server.

A denial-of-service vulnerability exists in the processing of multi-part/form-data requests in the base GoAhead web server application in versions v5.0.1, v.4.1.1 and v3.6.5. A specially crafted HTTP request can lead to an infinite loop in the process. The request can be unauthenticated in the form of GET or POST requests and does not require the requested resource to exist on the server.