The NETGEAR ProSafe Plus Configuration Utility creates configuration backup files containing cleartext passwords, which might allow remote attackers to obtain sensitive information by reading a file.

A vulnerability has been found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /currentsetting.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear R7000 1.0.11.136_10.2.120 and classified as problematic. Affected by this issue is some unknown functionality of the file /debuginfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. VDB-253382 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

NETGEAR GS810EMX devices before 1.0.0.5 are affected by disclosure of sensitive information.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects R7500v2 before 1.0.3.20, R7800 before 1.0.2.38, WN3000RPv3 before 1.0.2.50, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of NETGEAR XR1000 1.0.0.52_1.0.38 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of SOAP messages. The issue results from a lack of authentication required for a privileged request. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-13325.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects RBW30 before 2.6.1.4, RBS40V before 2.6.1.4, RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBK754 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBK854 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

NETGEAR RAX30 GetInfo Missing Authentication Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of SOAP requests. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to disclose sensitive information, leading to further compromise. Was ZDI-CAN-19608.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D6220 before 1.0.0.32, D6400 before 1.0.0.60, D8500 before 1.0.3.29, R6250 before 1.0.4.16, R6300v2 before 1.0.4.18, R6400 before 1.01.32, R6400v2 before 1.0.2.44, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7000 before 1.0.9.14, R7000P before 1.3.0.8, R6900P before 1.3.0.8, R7100LG before 1.0.0.34, R7300DST before 1.0.0.56, R7900 before 1.0.1.26, R8000 before 1.0.4.4, R8500 before 1.0.2.106, R8300 before 1.0.2.106, and WNDR3400v3 before 1.0.1.16.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D7800 before 1.0.1.28, R6100 before 1.0.1.20, R7500 before 1.0.0.118, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.48, and WNDR4500v3 before 1.0.0.48.

This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of NETGEAR R7450 1.2.0.62_1.0.1 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the SOAP API endpoint, which listens on TCP port 80 by default. The issue results from the lack of proper access control. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-11559.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects CBR40 before 2.5.0.10, RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

Certain NETGEAR devices are affected by a hardcoded password. This affects RBK352 before 4.4.0.10, RBR350 before 4.4.0.10, and RBS350 before 4.4.0.10.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects EAX80 before 1.0.1.62, EX7000 before 1.0.1.104, R6120 before 1.0.0.76, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.78, R6850 before 1.1.0.78, R6350 before 1.1.0.78, R6330 before 1.1.0.78, R6800 before 1.2.0.76, R6900v2 before 1.2.0.76, R6700v2 before 1.2.0.76, R7000 before 1.0.11.116, R6900P before 1.3.3.140, R7000P before 1.3.3.140, R7200 before 1.2.0.76, R7350 before 1.2.0.76, R7400 before 1.2.0.76, R7450 before 1.2.0.76, AC2100 before 1.2.0.76, AC2400 before 1.2.0.76, AC2600 before 1.2.0.76, R7900 before 1.0.4.38, R7960P before 1.4.1.66, R8000 before 1.0.4.68, R7900P before 1.4.1.66, R8000P before 1.4.1.66, RAX15 before 1.0.2.82, RAX20 before 1.0.2.82, RAX200 before 1.0.3.106, RAX45 before 1.0.2.72, RAX50 before 1.0.2.72, RAX75 before 1.0.3.106, and RAX80 before 1.0.3.106.

NETGEAR D7000 devices before 1.0.1.68 are affected by authentication bypass.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R8300 before 1.0.2.106 and R8500 before 1.0.2.106.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.10.11, RBK853 before 3.2.10.11, RBR850 before 3.2.10.11, RBS850 before 3.2.10.11, RBK842 before 3.2.10.11, RBR840 before 3.2.10.11, and RBS840 before 3.2.10.11.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects D7800 before 1.0.1.28, R6700 before 1.0.1.36, R6900 before 1.0.1.34, R7500v2 before 1.0.3.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.48, and WNDR4500v3 before 1.0.0.48.

An issue was discovered on NETGEAR Orbi Tri-Band Business WiFi Add-on Satellite (SRS60) AC3000 V2.5.1.106, Outdoor Satellite (RBS50Y) V2.5.1.106, and Pro Tri-Band Business WiFi Router (SRR60) AC3000 V2.5.1.106. The administrative SOAP interface allows an unauthenticated remote leak of sensitive/arbitrary Wi-Fi information, such as SSIDs and Pre-Shared-Keys (PSK).

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects R6250 before 1.0.4.8, R6300v2 before 1.0.4.8, R6700 before 1.0.1.20, R7000 before 1.0.7.10, R7000P before 1.0.0.58, R6900P before 1.0.0.58, R7100LG before 1.0.0.32, R7900 before 1.0.1.14, R8000 before 1.0.3.22, and R8500 before 1.0.2.94.

This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of NETGEAR R6700 V1.0.4.84_10.0.58 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of URLs. The issue results from the lack of proper routing of URLs. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-9618.

NETGEAR R6700v2 devices before 1.2.0.88 are affected by authentication bypass.

Certain NETGEAR devices are affected by a hardcoded password. This affects D6200 before 1.1.00.36, D7000 before 1.0.1.74, PR2000 before 1.0.0.30, R6020 before 1.0.0.42, R6080 before 1.0.0.42, R6050 before 1.0.1.24, JR6150 before 1.0.1.24, R6120 before 1.0.0.48, R6220 before 1.1.0.86, R6230 before 1.1.0.86, R6260 before 1.1.0.64, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R6900v2 before 1.2.0.62, and WNR2020 before 1.1.0.62.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects FS728TLP before 1.0.1.26, GS105Ev2 before 1.6.0.4, GS105PE before 1.6.0.4, GS108Ev3 before 2.06.08, GS108PEv3 before 2.06.08, GS110EMX before 1.0.1.4, GS116Ev2 before 2.6.0.35, GS408EPP before 1.0.0.15, GS808E before 1.7.0.7, GS810EMX before 1.7.1.1, GS908E before 1.7.0.3, GSS108E before 1.6.0.4, GSS108EPP before 1.0.0.15, GSS116E before 1.6.0.9, JGS516PE before 2.6.0.35, JGS524Ev2 before 2.6.0.35, JGS524PE before 2.6.0.35, XS512EM before 1.0.1.1, XS708Ev2 before 1.6.0.23, XS716E before 1.6.0.23, and XS724EM before 1.0.1.1.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects WAC505 before 8.0.5.5 and WAC510 before 8.0.5.5.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects WC7500 before 6.5.5.24, WC7600 before 6.5.5.24, WC7600v2 before 6.5.5.24, and WC9500 before 6.5.5.24.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects WAC720 before 3.9.1.13 and WAC730 before 3.9.1.13.

Certain NETGEAR devices are affected by lack of access control at the function level. This affects JGS516PE before 2.6.0.48, GS116Ev2 before 2.6.0.48, JGS524Ev2 before 2.6.0.48, and JGS524PE before 2.6.0.48. The NSDP protocol version allows unauthenticated remote attackers to obtain all the switch configuration parameters by sending the corresponding read requests.

The hashing algorithm implemented for NSDP password authentication on NETGEAR JGS516PE/GS116Ev2 v2.6.0.43 devices was found to be insecure, allowing attackers (with access to a network capture) to quickly generate multiple collisions to generate valid passwords, or infer some parts of the original.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects CBR40 before 2.5.0.10, RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.10.11, RBR850 before 3.2.10.11, and RBS850 before 3.2.10.11.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects CBR40 before 2.5.0.10, RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.10.11, RBR850 before 3.2.10.11, and RBS850 before 3.2.10.11.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects CBR40 before 2.5.0.10, RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.10.11, RBR850 before 3.2.10.11, and RBS850 before 3.2.10.11.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects CBR40 before 2.5.0.10, RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.10.11, RBR850 before 3.2.10.11, and RBS850 before 3.2.10.11.

This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of NETGEAR R6120, R6080, R6260, R6220, R6020, JNR3210, and WNR2020 routers with firmware 1.0.66. Authentication is not required to exploit this vulnerability. The specific flaw exists within the mini_httpd service, which listens on TCP port 80 by default. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-10754.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects EX3700 before 1.0.0.64, EX3800 before 1.0.0.64, EX6120 before 1.0.0.32, EX6130 before 1.0.0.16, R6300v2 before 1.0.4.12, R6700 before 1.0.1.26, R6900 before 1.0.1.22, R7000 before 1.0.9.6, R7300DST before 1.0.0.52, R7900 before 1.0.1.12, R8000 before 1.0.3.24, and R8500 before 1.0.2.94.

Certain NETGEAR devices are affected by password recovery and file access. This affects D8500 1.0.3.27 and earlier, DGN2200v4 1.0.0.82 and earlier, R6300v2 1.0.4.06 and earlier, R6400 1.0.1.20 and earlier, R6400v2 1.0.2.18 and earlier, R6700 1.0.1.22 and earlier, R6900 1.0.1.20 and earlier, R7000 1.0.7.10 and earlier, R7000P 1.0.0.58 and earlier, R7100LG 1.0.0.28 and earlier, R7300DST 1.0.0.52 and earlier, R7900 1.0.1.12 and earlier, R8000 1.0.3.46 and earlier, R8300 1.0.2.86 and earlier, R8500 1.0.2.86 and earlier, WNDR3400v3 1.0.1.8 and earlier, and WNDR4500v2 1.0.0.62 and earlier.

Certain NETGEAR devices are affected by an attacker's ability to read arbitrary files. This affects DST6501 before 1.1.0.6 and WNR2000v2 before 1.2.0.8.

The NetGear ProSafe WNAP210 with firmware 2.0.12 allows remote attackers to bypass authentication and obtain access to the configuration page by visiting recreate.php and then visiting index.php.

Certain NETGEAR devices are affected by mishandling of repeated URL calls. This affects JNR1010v2 before 2017-01-06, WNR614 before 2017-01-06, WNR618 before 2017-01-06, JWNR2000v5 before 2017-01-06, WNR2020 before 2017-01-06, JWNR2010v5 before 2017-01-06, WNR1000v4 before 2017-01-06, WNR2020v2 before 2017-01-06, R6220 before 2017-01-06, and WNDR3700v5 before 2017-01-06.

The administrative web interface on the Netgear DG632 with firmware 3.4.0_ap allows remote attackers to bypass authentication via a direct request to (1) gateway/commands/saveconfig.html, and (2) stattbl.htm, (3) modemmenu.htm, (4) onload.htm, (5) form.css, (6) utility.js, and possibly (7) indextop.htm in html/.

A support user exists on the device and appears to be a backdoor for Technical Support staff. The default password for this account is “support” and cannot be changed by a user via any normally accessible means.

NETGEAR WAC510 devices before 5.0.0.17 are affected by authentication bypass.