An issue was discovered in ProlinOS through 2.4.161.8859R. An attacker with local code execution privileges as a normal user (MAINAPP) can escalate to root privileges by exploiting the setuid installation of the xtables-multi binary and leveraging the ip6tables --modprobe switch.

An user able to alter the savevm data (either on the disk or over the wire during migration) could use this flaw to to corrupt QEMU process memory on the (destination) host, which could potentially result in arbitrary code execution on the host with the privileges of the QEMU process.

A vulnerability in ConfD could allow an authenticated, local attacker to execute arbitrary commands at the level of the account under which ConfD is running, which is commonly root. To exploit this vulnerability, an attacker must have a valid account on an affected device. The vulnerability exists because the affected software incorrectly runs the SFTP user service at the privilege level of the account that was running when the ConfD built-in Secure Shell (SSH) server for CLI was enabled. If the ConfD built-in SSH server was not enabled, the device is not affected by this vulnerability. An attacker with low-level privileges could exploit this vulnerability by authenticating to an affected device and issuing a series of commands at the SFTP interface. A successful exploit could allow the attacker to elevate privileges to the level of the account under which ConfD is running, which is commonly root. Note: Any user who can authenticate to the built-in SSH server may exploit this vulnerability. By default, all ConfD users have this access if the server is enabled. Software updates that address this vulnerability have been released.

gksu-polkit-0.0.3-6.fc18 was reported as fixing the issue in CVE-2012-5617 but the patch was improperly applied and it did not fixed the security issue.

A unnecessary privilege vulnerability in Trend Micro Apex One and Trend Micro Worry-Free Business Security 10.0 SP1 (on-prem versions only) could allow a local attacker to abuse an impersonation privilege and elevate to a higher level of privileges. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

Local privilege escalation due to insecure driver communication port permissions. The following products are affected: Acronis Cyber Protect Home Office (Windows) before build 40278, Acronis Agent (Windows) before build 31637, Acronis Cyber Protect 15 (Windows) before build 35979.

In Philips' IntelliSpace Cardiovascular (ISCV) products (ISCV Version 2.x or prior and Xcelera Version 4.1 or prior), an attacker with escalated privileges could access folders which contain executables where authenticated users have write permissions, and could then execute arbitrary code with local administrative permissions.

IBM Netezza Platform Software (IBM PureData System for Analytics 1.0.0) could allow a local user to modify a world writable file, which could be used to execute commands as root. IBM X-Force ID: 140211.

FusionCompute versions 6.3.0, 6.3.1, 6.5.0, 6.5.1 and 8.0.0 have a privilege escalation vulnerability. Due to improper privilege management, an attacker with common privilege may access some specific files and get the administrator privilege in the affected products. Successful exploit will cause privilege escalation.

The inode_init_owner function in fs/inode.c in the Linux kernel through 3.16 allows local users to create files with an unintended group ownership, in a scenario where a directory is SGID to a certain group and is writable by a user who is not a member of that group. Here, the non-member can trigger creation of a plain file whose group ownership is that group. The intended behavior was that the non-member can trigger creation of a directory (but not a plain file) whose group ownership is that group. The non-member can escalate privileges by making the plain file executable and SGID.

A flaw was found in the way qemu v1.3.0 and later (virtio-rng) validates addresses when guest accesses the config space of a virtio device. If the virtio device has zero/small sized config space, such as virtio-rng, a privileged guest user could use this flaw to access the matching host's qemu address space and thus increase their privileges on the host.

Improper Privilege Management vulnerability in AlgoSec Firewall Analyzer on Linux, 64 bit allows Privilege Escalation, Parameter Injection. A local user with access to the command line may escalate their privileges by abusing the parameters of a command that is approved in the sudoers file.  This issue affects Firewall Analyzer: A33.0, A33.10.

Local Privilege Escalation.This issue affects BLU-IC2: through 1.19.5; BLU-IC4: through 1.19.5 .

A privilege escalation vulnerability was reported in Lenovo PCManager prior to version 3.0.50.9162 that could allow an authenticated user to execute code with elevated privileges.

Geist WatchDog Console 3.2.2 uses a weak ACL for the C:\ProgramData\WatchDog Console directory, which allows local users to modify configuration data by updating (1) config.xml or (2) servers.xml.

A potential security vulnerability has been identified in the HP Support Assistant for versions prior to 9.47.41.0. The vulnerability could potentially allow a local attacker to escalate privileges via an arbitrary file write.

A vulnerability in London Trust Media Private Internet Access (PIA) VPN Client v77 for Windows could allow an unauthenticated, local attacker to run executable files with elevated privileges. The vulnerability is due to insufficient implementation of access controls. The "Changelog" and "Help" options available from the system tray context menu spawn an elevated instance of the user's default web browser. An attacker could exploit this vulnerability by selecting "Run as Administrator" from the context menu of an executable file within the file browser of the spawned default web browser. This may allow the attacker to execute privileged commands on the targeted system.

An unnecessary privilege vulnerability in Trend Micro Worry-Free Business Security 10.0 SP1 could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. This vulnerability is similar to but not identical to CVE-2021-44020 and 44021.

oVirt Node: Lock screen accepts F2 to drop to shell causing privilege escalation

Symantec Diagnostic Tool (SymDiag), prior to 3.0.79, may be susceptible to a Privilege Escalation vulnerability.

A Missing Impersonation Privilege Escalation vulnerability in Trend Micro Security 2018 (Consumer) products could allow a local attacker to escalate privileges on vulnerable installations. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit the vulnerability.

Soapbox through 0.3.1: Sandbox bypass - runs a second instance of Soapbox within a sandboxed Soapbox.

7-Zip through 18.01 on Windows implements the "Large memory pages" option by calling the LsaAddAccountRights function to add the SeLockMemoryPrivilege privilege to the user's account, which makes it easier for attackers to bypass intended access restrictions by using this privilege in the context of a sandboxed process. Note: This has been disputed by 3rd parties who argue this is a valid feature of Windows.

Exim 4 before 4.94.2 allows Execution with Unnecessary Privileges. Because Exim operates as root in the spool directory (owned by a non-root user), an attacker can write to a /var/spool/exim4/input spool header file, in which a crafted recipient address can indirectly lead to command execution.

A vulnerability in the Cisco Umbrella Enterprise Roaming Client (ERC) could allow an authenticated, local attacker to elevate privileges to Administrator. To exploit the vulnerability, the attacker must authenticate with valid local user credentials. This vulnerability is due to improper implementation of file system permissions, which could allow non-administrative users to place files within restricted directories. An attacker could exploit this vulnerability by placing an executable file within the restricted directory, which when executed by the ERC client, would run with Administrator privileges.

Privilege escalation vulnerability has been found in Wondershare Dr.Fone version 13.5.21. This vulnerability could allow an attacker to escalate privileges by replacing the binary ‘C:\ProgramData\Wondershare\wsServices\ElevationService.exe’ with a malicious binary. This binary will be executed by SYSTEM automatically.

Local Privilege escalation allows a low-privileged user to gain SYSTEM privileges in Citrix Secure Access Client for Windows

An Improper Privilege Management vulnerability in a shell session of Juniper Networks Junos OS allows an authenticated unprivileged attacker to gain full control of the system. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D45 on SRX Series; 12.3X48 versions prior to 12.3X48-D20 on SRX Series; 12.3 versions prior to 12.3R11 on EX Series; 14.1X53 versions prior to 14.1X53-D30 on EX2200/VC, EX3200, EX3300/VC, EX4200, EX4300, EX4550/VC, EX4600, EX6200, EX8200/VC (XRE), QFX3500, QFX3600, QFX5100;; 15.1X49 versions prior to 15.1X49-D20 on SRX Series.

CWE-269: Improper Privilege Management vulnerability exists for two services (of which one managing audit trail data and the other acting as server managing client request) that could cause a loss of Confidentiality, Integrity and Availability of engineering workstation when an attacker with standard privilege modifies the executable path of the windows services. To be exploited, services need to be restarted.

A vulnerability in the account management subsystem of Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to elevate privileges to root. The attacker must authenticate with valid administrator credentials. The vulnerability is due to improper implementation of access controls. An attacker could exploit this vulnerability by authenticating to the device as a specific user to gain the information needed to elevate privileges to root in a separate login shell. A successful exploit could allow the attacker to escape the CLI subshell and execute system-level commands on the underlying operating system as root. Cisco Bug IDs: CSCvj93548.

Improper Privilege Management vulnerability in WatchGuard EPDR, Panda AD360 and Panda Dome on Windows (PSANHost.exe module) allows arbitrary file delete with SYSTEM permissions. This issue affects EPDR: before 8.00.23.0000; Panda AD360: before 8.00.23.0000; Panda Dome: before 22.03.00.

CWE-269: Improper Privilege Management vulnerability exists that could cause unauthorized access, loss of confidentiality, integrity, and availability of the workstation when non-admin authenticated user tries to perform privilege escalation by tampering with the binaries

A vulnerability in the Cisco Umbrella Enterprise Roaming Client (ERC) could allow an authenticated, local attacker to elevate privileges to Administrator. To exploit the vulnerability, the attacker must authenticate with valid local user credentials. This vulnerability is due to improper implementation of file system permissions, which could allow non-administrative users to place files within restricted directories. An attacker could exploit this vulnerability by placing an executable file within the restricted directory, which when executed by the ERC client, would run with Administrator privileges.

CWE-269: Improper Privilege Management vulnerability exists that could cause unauthorized access, loss of confidentiality, integrity and availability of the workstation when non-admin authenticated user tries to perform privilege escalation by tampering with the binaries.

A Privilege Escalation vulnerability exists in the SDBagent service in Safend Data Protector Agent 3.4.5586.9772, which could let a local malicious user obtain privileges.

Dell EMC PowerScale OneFS versions 8.1.0 - 9.1.0 contain a privilege escalation vulnerability. A user with ISI_PRIV_JOB_ENGINE may use the PermissionRepair job to grant themselves the highest level of RBAC privileges thus being able to read arbitrary data, tamper with system software or deny service to users.

A Privilege Escalation vulnerability exists in the unquoted Service Binary in SDPAgent or SDBAgent in Safend Data Protector Agent 3.4.5586.9772, which could let a local malicious user obtain privileges.

Citrix XenServer 4.1, 6.0, 5.6 SP2, 5.6 Feature Pack 1, 5.6 Common Criteria, 5.6, 5.5, 5.0, and 5.0 Update 3 contains a Local Privilege Escalation Vulnerability which could allow local users with access to a guest operating system to gain elevated privileges.

An unnecessary privilege vulnerability in Trend Micro Worry-Free Business Security 10.0 SP1 could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. This vulnerability is similar to but not identical to CVE-2021-44019 and 44021.

Sympa through 6.2.57b.2 allows a local privilege escalation from the sympa user account to full root access by modifying the sympa.conf configuration file (which is owned by sympa) and parsing it through the setuid sympa_newaliases-wrapper executable.

Dell EMC Isilon OneFS versions 8.1 and later and Dell EMC PowerScale OneFS version 9.0.0 contain a privilege escalation vulnerability on a SmartLock Compliance mode cluster. The compadmin user connecting using ISI PRIV LOGIN SSH or ISI PRIV LOGIN CONSOLE can elevate privileges to the root user if they have ISI PRIV HARDENING privileges.

All versions of Windscribe VPN for Mac and Windows <= v2.02.10 contain a local privilege escalation vulnerability in the WindscribeService component. A low privilege user could leverage several openvpn options to execute code as root/SYSTEM.

An unnecessary privilege vulnerability in Trend Micro Worry-Free Business Security 10.0 SP1 could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. This vulnerability is similar to but not identical to CVE-2021-44019 and 44020.

An issue in Ocuco Innovation v.2.10.24.51 allows a local attacker to escalate privileges via the STOCKORDERENTRY.EXE component

Unnecessary privilege vulnerabilities in Trend Micro Apex One, Apex One as a Service, Worry-Free Business Security 10.0 SP1 and Worry-Free Business Security Services could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. This vulnerability is similar to but not identical to CVE-2021-42105, 42106 and 42107.

The Amazon Web Services (AWS) CloudFormation bootstrap tools package (aka aws-cfn-bootstrap) before 1.4-19.10 allows local users to execute arbitrary code with root privileges by leveraging the ability to create files in an unspecified directory.

Unnecessary privilege vulnerabilities in Trend Micro Apex One, Apex One as a Service, Worry-Free Business Security 10.0 SP1 and Worry-Free Business Security Services could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. This vulnerability is similar to but not identical to CVE-2021-42104, 42105 and 42107.

Pritunl Client v1.2.2550.20 contains a local privilege escalation vulnerability in the pritunl-service component. The attack vector is: malicious openvpn config. A local attacker could leverage the log and log-append along with log injection to create or append to privileged script files and execute code as root/SYSTEM.

A vulnerability in the Trend Micro Apex One Security Agent Plug-in User Interface Manager could allow a local attacker to bypass existing security and execute arbitrary code on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

Windows Kernel Elevation of Privilege Vulnerability