Salt-api in SaltStack Salt before 2015.8.13, 2016.3.x before 2016.3.5, and 2016.11.x before 2016.11.2 allows arbitrary command execution on a salt-master via Salt's ssh_client.

An issue was discovered in SaltStack Salt in versions before 3002.9, 3003.5, 3004.2. PAM auth fails to reject locked accounts, which allows a previously authorized user whose account is locked still run Salt commands when their account is locked. This affects both local shell accounts with an active session and salt-api users that authenticate via PAM eauth.

Salt (aka SaltStack) 0.15.0 through 0.17.0 allows remote authenticated users who are using external authentication or client ACL to execute restricted routines by embedding the routine in another routine.

An issue was discovered in through SaltStack Salt before 3002.5. salt-api does not honor eauth credentials for the wheel_async client. Thus, an attacker can remotely run any wheel modules on the master.

SaltStack Salt before 2017.7.8 and 2018.3.x before 2018.3.3 allow remote attackers to bypass authentication and execute arbitrary commands via salt-api(netapi).

Salt before 2015.5.10 and 2015.8.x before 2015.8.8, when PAM external authentication is enabled, allows attackers to bypass the configured authentication service by passing an alternate service with a command sent to LocalClient.

An issue was discovered in SaltStack Salt in versions before 3002.8, 3003.4, 3004.1. A minion authentication denial of service can cause a MiTM attacker to force a minion process to stop by impersonating a master.

In SaltStack Salt through 3002, salt-netapi improperly validates eauth credentials and tokens. A user can bypass authentication and invoke Salt SSH.

CWE - CWE-287: Improper Authentication vulnerability in SUSE Linux Enterprise Server 15 SP 3; openSUSE Tumbleweed allows local attackers to execute arbitrary code via salt without the need to specify valid credentials. This issue affects: SUSE Linux Enterprise Server 15 SP 3 salt versions prior to 3002.2-3. openSUSE Tumbleweed salt version 3002.2-2.1 and prior versions. This issue affects: SUSE Linux Enterprise Server 15 SP 3 salt versions prior to 3002.2-3. openSUSE Tumbleweed salt version 3002.2-2.1 and prior versions.

Authentication vulnerability found in Dahua NVR models NVR50XX, NVR52XX, NVR54XX, NVR58XX with software before DH_NVR5xxx_Eng_P_V2.616.0000.0.R.20171102. Attacker could exploit this vulnerability to gain access to additional operations by means of forging json message.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "wget" as one of the service actions for a normal user to connect the device to an external website. It retrieves the parameter "URL" from the query string and then passes it to an internal function that uses the curl module on the device to retrieve the contents of the website.

An information disclosure / elevation of privilege vulnerability in the BlackBerry Workspaces Server could potentially allow an attacker who has legitimate access to BlackBerry Workspaces to gain access to another user's workspace by making multiple login requests to the server.

The FusionSphere OpenStack V100R006C00SPC102(NFV) has an improper authentication vulnerability. Due to improper authentication on one port, an authenticated, remote attacker may exploit the vulnerability to execute more operations by send a crafted rest message.

An attacker that has hijacked a Unitrends Enterprise Backup (before 9.1.2) web server session can leverage api/includes/users.php to change the password of the logged in account without knowing the current password. This allows for an account takeover.

An authentication issue was discovered in GitLab that allowed a bypass of email verification. This was addressed in GitLab 12.1.2 and 12.0.4.

Glewlwyd 2.0.0, fixed in 2.6.1 is affected by an incorrect access control vulnerability. One user can attempt to log in as another user without its password.

eLabFTW is an electronic lab notebook manager for research teams. In versions prior to 4.2.0 there is a vulnerability which allows any authenticated user to gain access to arbitrary accounts by setting a specially crafted email address. This vulnerability impacts all instances that have not set an explicit email domain name allowlist. Note that whereas neither administrators nor targeted users are notified of a change, an attacker will need to control an account. The default settings require administrators to validate newly created accounts. The problem has been patched. Users should upgrade to at least version 4.2.0. For users unable to upgrade enabling an email domain allow list (from Sysconfig panel, Security tab) will completely resolve the issue.

A vulnerability in Cisco WebEx Meetings Server could allow an authenticated, remote attacker to conduct arbitrary password changes against any non-administrative user. More Information: CSCuz03345. Known Affected Releases: 2.6. Known Fixed Releases: 2.7.1.12.

It was found that there were no permission checks performed in the Distributed Fork plugin before and including 1.5.0 for Jenkins that provides the dist-fork CLI command beyond the basic check for Overall/Read permission, allowing anyone with that permission to run arbitrary shell commands on all connected nodes.

An exploitable authentication bypass vulnerability exists in the hostname processing of the Moxa AWK-3131A firmware version 1.13. A specially configured device hostname can cause the device to interpret select remote traffic as local traffic, resulting in a bypass of web authentication. An attacker can send authenticated SNMP requests to trigger this vulnerability.

A flaw was found in the reset credential flow in all Keycloak versions before 8.0.0. This flaw allows an attacker to gain unauthorized access to the application.

Progress Sitefinity 9.1 uses wrap_access_token as a non-expiring authentication token that remains valid after a password change or a session termination. Also, it is transmitted as a GET parameter. This is fixed in 10.1.

October is a Content Management System (CMS) and web platform built on the the Laravel PHP Framework. In affected versions administrator accounts which had previously been deleted may still be able to sign in to the backend using October CMS v2.0. The issue has been patched in v2.1.12 of the october/october package. There are no workarounds for this issue and all users should update.

A Trusted RFC connection in SAP KERNEL 32NUC, SAP KERNEL 32Unicode, SAP KERNEL 64NUC, SAP KERNEL 64Unicode 7.21, 7.21EXT, 7.22, 7.22EXT; SAP KERNEL from 7.21 to 7.22, 7.45, 7.49, can be established to a different client or a different user on the same system, although no explicit Trusted/Trusting Relation to the same system has been defined.

A authentication bypass vulnerability exists in GitLab CE/EE <v12.3.2, <v12.2.6, and <v12.1.10 in the Salesforce login integration that could be used by an attacker to create an account that bypassed domain restrictions and email verification requirements.

Improper input sanitization within the restricted administration shell on UCOPIA Wireless Appliance devices before 4.4.20, 5.0.x before 5.0.19, and 5.1.x before 5.1.11 allows authenticated remote attackers to escape the shell and escalate their privileges by uploading a .bashrc file containing the /bin/sh string. In some situations, authentication can be achieved via the bhu85tgb default password for the admin account.

A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02; SIPROTEC 7SJ686 : All versions < V 4.87; SIPROTEC 7UT686 : All versions < V 4.02; SIPROTEC 7SD686 : All versions < V 4.05; SIPROTEC 7SJ66 : All versions < V 4.30. Attackers with network access to the device's web interface (port 80/tcp) could possibly circumvent authentication and perform certain administrative operations. A legitimate user must be logged into the web interface for the attack to be successful.

A flaw was found in SSSD version 1.9.0. The SSSD's access-provider logic causes the result of the HBAC rule processing to be ignored in the event that the access-provider is also handling the setup of the user's SELinux user context.

main/manager.c in the Manager Interface in Asterisk Open Source 1.6.2.x before 1.6.2.24, 1.8.x before 1.8.11.1, and 10.x before 10.3.1 and Asterisk Business Edition C.3.x before C.3.7.4 does not properly enforce System class authorization requirements, which allows remote authenticated users to execute arbitrary commands via (1) the originate action in the MixMonitor application, (2) the SHELL and EVAL functions in the GetVar manager action, or (3) the SHELL and EVAL functions in the Status manager action.

AIMANAGER before B115 on MONITORAPP Application Insight Web Application Firewall (AIWAF) devices with Manager 2.1.0 has Improper Authentication. An attacker can gain administrative access by modifying the response to an authentication check request.

Multiple vulnerabilities in Cisco BroadWorks CommPilot Application Software could allow an authenticated, remote attacker to delete arbitrary user accounts or gain elevated privileges on an affected system.

Symfony is a PHP framework for web and console applications and a set of reusable PHP components. A vulnerability related to firewall authentication is in Symfony starting with version 5.3.0 and prior to 5.3.2. When an application defines multiple firewalls, the token authenticated by one of the firewalls was available for all other firewalls. This could be abused when the application defines different providers for each part of the application, in such a situation, a user authenticated on a part of the application could be considered authenticated on the rest of the application. Starting in version 5.3.2, a patch ensures that the authenticated token is only available for the firewall that generates it.

In Arista's MOS (Metamako Operating System) software which is supported on the 7130 product line, under certain conditions, authentication is bypassed by unprivileged users who are accessing the Web UI. This issue affects: Arista Metamako Operating System MOS-0.34.0 and prior releases

An Improper Authentication issue was discovered in General Motors (GM) and Shanghai OnStar (SOS) SOS iOS Client 7.1. Successful exploitation of this vulnerability may allow an attacker to subvert security mechanisms and reset a user account password.

The All in One SEO WordPress plugin before 4.1.5.3 is affected by a Privilege Escalation issue, which was discovered during an internal audit by the Jetpack Scan team, and may grant bad actors access to protected REST API endpoints they shouldn’t have access to. This could ultimately enable users with low-privileged accounts, like subscribers, to perform remote code execution on affected sites.

McAfee LinuxShield 1.5.1 and earlier does not properly implement client authentication, which allows remote authenticated users to obtain Admin access to the statistics server by leveraging a client account.

An Authentication Bypass vulnerability in the SAML Authentication component of BlackBerry Workspaces Server (deployed with Appliance-X) version(s) 10.1, 9.1 and earlier could allow an attacker to potentially gain access to the application in the context of the targeted user’s account.

A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690.

modules/admuser.php in myGesuad 0.9.14 (aka 0.9) does not require administrative authentication, which allows remote authenticated users to list user accounts via a Find action.

IBM Security QRadar SIEM 7.2 and 7.3 could allow a user to bypass authentication which could lead to code execution. IBM X-Force ID: 138824.

It was found that Keycloak oauth would permit an authenticated resource to obtain an access/refresh token pair from the authentication server, permitting indefinite usage in the case of permission revocation. An attacker on an already compromised resource could use this flaw to grant himself continued permissions and possibly conduct further attacks.

Improper authentication in the Intel(R) In-Band Manageability software before version 2.13.0 may allow a privileged user to potentially enable escalation of privilege via network access.

IBM WebSphere Partner Gateway (WPG) 6.0.0 through 6.0.0.7 does not properly handle failures of signature verification, which might allow remote authenticated users to submit a crafted RosettaNet (aka RNIF) document to a backend application, related to (1) "altered service content" and (2) "digital signature foot-print."

The Service Component Architecture (SCA) feature pack for IBM WebSphere Application Server (WAS) SCA 1.0 before 1.0.0.3 allows remote authenticated users to bypass intended authentication.transport access restrictions and obtain unspecified access via unknown vectors.

In Zulip Server before 1.7.1, on a server with multiple realms, a vulnerability in the invitation system lets an authorized user of one realm on the server create a user account on any other realm.

Search Guard Kibana Plugin versions before 5.6.8-7 and before 6.x.y-12 had an issue that an authenticated Kibana user could impersonate as kibanaserver user when providing wrong credentials when all of the following conditions a-c are true: a) Kibana is configured to use Single-Sign-On as authentication method, one of Kerberos, JWT, Proxy, Client certificate. b) The kibanaserver user is configured to use HTTP Basic as the authentication method. c) Search Guard is configured to use an SSO authentication domain and HTTP Basic at the same time

eLabFTW is an electronic lab notebook manager for research teams. In versions prior to 4.2.0 there is a vulnerability which allows an attacker to authenticate as an existing user, if that user was created using a single sign-on authentication option such as LDAP or SAML. It impacts instances where LDAP or SAML is used for authentication instead of the (default) local password mechanism. Users should upgrade to at least version 4.2.0.

Jenkins versions 2.56 and earlier as well as 2.46.1 LTS and earlier are vulnerable to a login command which allowed impersonating any Jenkins user. The `login` command available in the remoting-based CLI stored the encrypted user name of the successfully authenticated user in a cache file used to authenticate further commands. Users with sufficient permission to create secrets in Jenkins, and download their encrypted values (e.g. with Job/Configure permission), were able to impersonate any other Jenkins user on the same instance.

An issue was discovered in Barrier before 2.4.0. The barriers component (aka the server-side implementation of Barrier) does not sufficiently verify the identify of connecting clients. Clients can thus exploit weaknesses in the provided protocol to cause denial-of-service or stage further attacks that could lead to information leaks or integrity corruption.

An Incorrect Access Control issue was discovered on MicroDigital N-series cameras with firmware through 6400.0.8.5 because any valid cookie can be used to make requests as an admin.