The firmware on GateHouse; Harris BGAN RF-7800B-VU204 and BGAN RF-7800B-DU204; Hughes Network Systems 9201, 9450, and 9502; Inmarsat; Japan Radio JUE-250 and JUE-500; and Thuraya IP satellite terminals does not require authentication for sessions on TCP port 1827, which allows remote attackers to execute arbitrary code via unspecified protocol operations.
D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.
On certain Brother devices, authorization is mishandled by including a valid AuthCookie cookie in the HTTP response to a failed login attempt. Affected models are: MFC-J6973CDW MFC-J4420DW MFC-8710DW MFC-J4620DW MFC-L8850CDW MFC-J3720 MFC-J6520DW MFC-L2740DW MFC-J5910DW MFC-J6920DW MFC-L2700DW MFC-9130CW MFC-9330CDW MFC-9340CDW MFC-J5620DW MFC-J6720DW MFC-L8600CDW MFC-L9550CDW MFC-L2720DW DCP-L2540DW DCP-L2520DW HL-3140CW HL-3170CDW HL-3180CDW HL-L8350CDW HL-L2380DW ADS-2500W ADS-1000W ADS-1500W.
Hanwha Techwin SRN-4000, SRN-4000 firmware versions prior to SRN4000_v2.16_170401, A specially crafted http request and response could allow an attacker to gain access to the device management page with admin privileges without proper authentication.
AIRTAME HDMI dongle with firmware before 2.2.0 allows unauthenticated access to a big part of the management interface. It is possible to extract all information including the Wi-Fi password, reboot, or force a software update at an arbitrary time.
An Improper Authentication issue was discovered in Newport XPS-Cx and XPS-Qx. An attacker may bypass authentication by accessing a specific uniform resource locator (URL).
The integrated web server on Siemens SCALANCE X-200 switches with firmware before 4.5.0 and X-200IRT switches with firmware before 5.1.0 does not properly enforce authentication requirements, which allows remote attackers to perform administrative actions via requests to the management interface.
The network enabled distribution of Kura before 2.1.0 takes control over the device's firewall setup but does not allow IPv6 firewall rules to be configured. Still the Equinox console port 5002 is left open, allowing to log into Kura without any user credentials over unencrypted telnet and executing commands using the Equinox "exec" command. As the process is running as "root" full control over the device can be acquired. IPv6 is also left in auto-configuration mode, accepting router advertisements automatically and assigns a MAC address based IPv6 address.
EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.
License Manager Service of YOKOGAWA products (CENTUM VP (R5.01.00 - R6.06.00), CENTUM VP Entry Class (R5.01.00 - R6.06.00), ProSafe-RS (R3.01.00 - R4.04.00), PRM (R4.01.00 - R4.02.00), B/M9000 VP(R7.01.01 - R8.02.03)) allows remote attackers to bypass access restriction to send malicious files to the PC where License Manager Service runs via unspecified vectors.
A Use of Client-Side Authentication issue was discovered in Advantech B+B SmartWorx MESR901 firmware versions 1.5.2 and prior. The web interface uses JavaScript to check client authentication and redirect unauthorized users. Attackers may intercept requests and bypass authentication to access restricted web pages.
PostgreSQL versions before 9.2.22, 9.3.18, 9.4.13, 9.5.8 and 9.6.4 are vulnerable to incorrect authentication flaw allowing remote attackers to gain access to database accounts with an empty password.
In ABB IP GATEWAY 3.39 and prior, by accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access the configuration files and application pages without authentication.
A remote attacker could bypass the Sandstorm organization restriction before build 0.203 via a comma in an email-address field.
Televes COAXDATA GATEWAY 1Gbps devices doc-wifi-hgw_v1.02.0014 4.20 do not check password.shtml authorization, leading to Arbitrary password change.
A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995.
The Adaptive Security Device Management (ASDM) remote-management feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.6) does not properly implement the authentication-certificate option, which allows remote attackers to bypass authentication via a TCP session to an ASDM interface, aka Bug ID CSCuh44815.
Detcon Sitewatch Gateway, all versions without cellular, Passwords are presented in plaintext in a file that is accessible without authentication.
An issue was discovered in Zammad before 1.0.4, 1.1.x before 1.1.3, and 1.2.x before 1.2.1. Attackers can login with the hashed password itself (e.g., from the DB) instead of the valid password string.
An Authentication Bypass by Capture-Replay issue was discovered in Schneider Electric Modicon Modbus Protocol. Sensitive information is transmitted in cleartext in the Modicon Modbus protocol, which may allow an attacker to replay the following commands: run, stop, upload, and download.
It was noticed that a malicious process impersonating an Impala daemon in Apache Impala (incubating) 2.7.0 to 2.8.0 could cause Impala daemons to skip authentication checks when Kerberos is enabled (but TLS is not). If the malicious server responds with 'COMPLETE' before the SASL handshake has completed, the client will consider the handshake as completed even though no exchange of credentials has happened.
A vulnerability in the web-based GUI of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication and execute actions with administrator privileges. The vulnerability is due to a processing error in the role-based access control (RBAC) of URLs. An attacker could exploit this vulnerability by sending API commands via HTTP to a particular URL without prior authentication. An exploit could allow the attacker to perform any actions in Cisco Prime Home with administrator privileges. This vulnerability affects Cisco Prime Home versions from 6.3.0.0 to the first fixed release 6.5.0.1. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCvb49837.
Unspecified vulnerability in a cryptographic feature in MailEnable Standard Edition before 1.93, Professional Edition before 1.73, and Enterprise Edition before 1.21 leads to "weakened authentication security" with unknown impact and attack vectors. NOTE: due to lack of details, it is not clear whether this is the same as CVE-2006-1792.
A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.
EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains an Improper Authentication vulnerability that could potentially be exploited by malicious users to compromise the affected system.
EMC Isilon InsightIQ 4.1.0, 4.0.1, 4.0.0, 3.2.2, 3.2.1, 3.2.0, 3.1.1, 3.1.0, 3.0.1, 3.0.0 is affected by an authentication bypass vulnerability that could potentially be exploited by attackers to compromise the affected system.
Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access
VCM5010 with software versions earlier before V100R002C50SPC100 has an authentication bypass vulnerability. This is due to improper implementation of authentication for accessing web pages. An unauthenticated attacker could bypass the authentication by sending a crafted HTTP request. 5010 with software versions earlier before V100R002C50SPC100 has an arbitrary file upload vulnerability. The software does not validate the files that uploaded. An authenticated attacker could upload arbitrary files to the system.
4MOSAn GCB Doctor’s login page has improper validation of Cookie, which allows an unauthenticated remote attacker to bypass authentication by code injection in cookie, and arbitrarily manipulate the system or interrupt services by upload and execution of arbitrary files.
WAPM-1166D firmware Ver.1.2.7 and earlier, WAPM-APG600H firmware Ver.1.16.1 and earlier allows remote attackers to bypass authentication and access the configuration interface via unspecified vectors.
The Supermicro BMC implementation allows remote attackers to bypass authentication and execute arbitrary IPMI commands by using cipher suite 0 (aka cipher zero) and an arbitrary password.
Unspecified vulnerability in Trend Micro ServerProtect 5.7 and 5.58 allows remote attackers to execute arbitrary code via vectors related to obtaining "administrative access to the RPC interface."
Xiaongmai AHB7008T-MH-V2, AHB7804R-ELS, AHB7804R-MH-V2, AHB7808R-MS-V2, AHB7808R-MS, AHB7808T-MS-V2, AHB7804R-LMS, HI3518_50H10L_S39 V4.02.R11.7601.Nat.Onvif.20170420, V4.02.R11.Nat.Onvif.20160422, V4.02.R11.7601.Nat.Onvif.20170424, V4.02.R11.Nat.Onvif.20170327, V4.02.R11.Nat.Onvif.20161205, V4.02.R11.Nat.20170301, V4.02.R12.Nat.OnvifS.20170727 is affected by a backdoor in the macGuarder and dvrHelper binaries of DVR/NVR/IP camera firmware due to static root account credentials in the system.
Paid To Read Script 2.0.5 has authentication bypass in the admin panel via a direct request, as demonstrated by the admin/viewvisitcamp.php fn parameter and the admin/userview.php uid parameter.
On Jooan IP Camera A5 2.3.36 devices, an insecure FTP server does not require authentication, which allows remote attackers to read or replace core system files including those used for authentication (such as passwd and shadow). This can be abused to take full root level control of the device.
The UserPro plugin before 4.9.17.1 for WordPress, when used on a site with the "admin" username, allows remote attackers to bypass authentication and obtain administrative access via a "true" value for the up_auto_log parameter in the QUERY_STRING to the default URI.
Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.
The Sierra Wireless AirLink Raven X EV-DO gateway 4221_4.0.11.003 and 4228_4.0.11.003 allows remote attackers to reprogram the firmware via a replay attack using UDP ports 17336 and 17388.
Undocumented TELNET service in TRENDnet TEW-691GR and TEW-692GR when a web page named backdoor contains an HTML parameter of password and a value of j78G¬DFdg_24Mhw3.
VMware vCenter Server 4.0 before Update 4b and 4.1 before Update 3a, VMware VirtualCenter 2.5, VMware vSphere Client 4.0 before Update 4b and 4.1 before Update 3a, VMware VI-Client 2.5, VMware ESXi 3.5 through 4.1, and VMware ESX 3.5 through 4.1 do not properly implement the management authentication protocol, which allow remote servers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors.
In Joomla! before 3.8.2, a bug allowed third parties to bypass a user's 2-factor authentication method.
SAP Business Intelligence Promotion Management Application, Enterprise 4.10, 4.20, and 4.30, does not perform authentication checks for functionalities that require user identity.
An Authentication Bypass Vulnerability exists in DELL SonicWALL Analyzer 7.0, Global Management System (GMS) 4.1, 5.0, 5.1, 6.0, and 7.0; Universal Management Appliance (UMA) 5.1, 6.0, and 7.0 and ViewPoint 4.1, 5.0, 5.1, and 6.0 via the skipSessionCheck parameter to the UMA interface (/appliance/), which could let a remote malicious user obtain access to the root account.
Alcatel-Lucent OmniVista 8770 2.0 through 3.0 exposes different ORBs interfaces, which can be queried using the GIOP protocol on TCP port 30024. An attacker can bypass authentication, and OmniVista invokes methods (AddJobSet, AddJob, and ExecuteNow) that can be used to run arbitrary commands on the server, with the privilege of NT AUTHORITY\SYSTEM on the server. NOTE: The discoverer states "The vendor position is to refer to the technical guidelines of the product security deployment to mitigate this issue, which means applying proper firewall rules to prevent unauthorised clients to connect to the OmniVista server."
The web server in Novell ZENworks Configuration Management (ZCM) 10.3 and 11.2 before 11.2.4 does not properly perform authentication for zenworks/jsp/index.jsp, which allows remote attackers to conduct directory traversal attacks, and consequently upload and execute arbitrary programs, via a request to TCP port 443.
An attacker can log into the local Niagara platform (Niagara AX Framework Versions 3.8 and prior or Niagara 4 Framework Versions 4.4 and prior) using a disabled account name and a blank password, granting the attacker administrator access to the Niagara system.
The web management UI in Palo Alto Networks PAN-OS before 3.1.12, 4.0.x before 4.0.10, and 4.1.x before 4.1.4 allows remote attackers to bypass authentication and obtain administrator privileges via unspecified vectors, aka Ref ID 37034.
These Sinapsi devices do not check if users that visit pages within the device have properly authenticated. By directly visiting the pages within the device, attackers can gain unauthorized access with administrative privileges.
ASUS DSL-AC51, DSL-AC52U, DSL-AC55U, DSL-N55U C1, DSL-N55U D1, DSL-AC56U, DSL-N10_C1, DSL-N12U C1, DSL-N12E C1, DSL-N14U, DSL-N14U-B1, DSL-N16, DSL-N16U, DSL-N17U, DSL-N66U, and DSL-AC750 routers allow remote attackers to change passwords of arbitrary users via the http_passwd parameter to mod_login.asp.
McAfee SmartFilter Administration, and SmartFilter Administration Bess Edition, before 4.2.1.01 does not require authentication for access to the JBoss Remote Method Invocation (RMI) interface, which allows remote attackers to execute arbitrary code via a crafted .war file.