On Televes COAXDATA GATEWAY 1Gbps devices doc-wifi-hgw_v1.02.0014 4.20, the backup/restore feature lacks access control, related to ReadFile.cgi and LoadCfgFile.
Televes COAXDATA GATEWAY 1Gbps devices doc-wifi-hgw_v1.02.0014 4.20 have cleartext credentials in /mib.db.
D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.
On certain Brother devices, authorization is mishandled by including a valid AuthCookie cookie in the HTTP response to a failed login attempt. Affected models are: MFC-J6973CDW MFC-J4420DW MFC-8710DW MFC-J4620DW MFC-L8850CDW MFC-J3720 MFC-J6520DW MFC-L2740DW MFC-J5910DW MFC-J6920DW MFC-L2700DW MFC-9130CW MFC-9330CDW MFC-9340CDW MFC-J5620DW MFC-J6720DW MFC-L8600CDW MFC-L9550CDW MFC-L2720DW DCP-L2540DW DCP-L2520DW HL-3140CW HL-3170CDW HL-3180CDW HL-L8350CDW HL-L2380DW ADS-2500W ADS-1000W ADS-1500W.
Hanwha Techwin SRN-4000, SRN-4000 firmware versions prior to SRN4000_v2.16_170401, A specially crafted http request and response could allow an attacker to gain access to the device management page with admin privileges without proper authentication.
AIRTAME HDMI dongle with firmware before 2.2.0 allows unauthenticated access to a big part of the management interface. It is possible to extract all information including the Wi-Fi password, reboot, or force a software update at an arbitrary time.
An Improper Authentication issue was discovered in Newport XPS-Cx and XPS-Qx. An attacker may bypass authentication by accessing a specific uniform resource locator (URL).
The network enabled distribution of Kura before 2.1.0 takes control over the device's firewall setup but does not allow IPv6 firewall rules to be configured. Still the Equinox console port 5002 is left open, allowing to log into Kura without any user credentials over unencrypted telnet and executing commands using the Equinox "exec" command. As the process is running as "root" full control over the device can be acquired. IPv6 is also left in auto-configuration mode, accepting router advertisements automatically and assigns a MAC address based IPv6 address.
EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.
License Manager Service of YOKOGAWA products (CENTUM VP (R5.01.00 - R6.06.00), CENTUM VP Entry Class (R5.01.00 - R6.06.00), ProSafe-RS (R3.01.00 - R4.04.00), PRM (R4.01.00 - R4.02.00), B/M9000 VP(R7.01.01 - R8.02.03)) allows remote attackers to bypass access restriction to send malicious files to the PC where License Manager Service runs via unspecified vectors.
A Use of Client-Side Authentication issue was discovered in Advantech B+B SmartWorx MESR901 firmware versions 1.5.2 and prior. The web interface uses JavaScript to check client authentication and redirect unauthorized users. Attackers may intercept requests and bypass authentication to access restricted web pages.
PostgreSQL versions before 9.2.22, 9.3.18, 9.4.13, 9.5.8 and 9.6.4 are vulnerable to incorrect authentication flaw allowing remote attackers to gain access to database accounts with an empty password.
In ABB IP GATEWAY 3.39 and prior, by accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access the configuration files and application pages without authentication.
An Improper Authentication issue was discovered in ABB VSN300 WiFi Logger Card versions 1.8.15 and prior, and VSN300 WiFi Logger Card for React versions 2.1.3 and prior. By accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access internal information about status and connected devices without authenticating.
On Wireless IP Camera (P2P) WIFICAM devices, an attacker can use the RTSP server on port 10554/tcp to watch the streaming without authentication via tcp/av0_1 or tcp/av0_0.
A remote attacker could bypass the Sandstorm organization restriction before build 0.203 via a comma in an email-address field.
A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995.
An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).
Detcon Sitewatch Gateway, all versions without cellular, Passwords are presented in plaintext in a file that is accessible without authentication.
An issue was discovered in Zammad before 1.0.4, 1.1.x before 1.1.3, and 1.2.x before 1.2.1. Attackers can login with the hashed password itself (e.g., from the DB) instead of the valid password string.
An Authentication Bypass by Capture-Replay issue was discovered in Schneider Electric Modicon Modbus Protocol. Sensitive information is transmitted in cleartext in the Modicon Modbus protocol, which may allow an attacker to replay the following commands: run, stop, upload, and download.
In Apache NiFi before 0.7.2 and 1.x before 1.1.2 in a cluster environment, if an anonymous user request is replicated to another node, the originating node identity is used rather than the "anonymous" user.
NetIQ iManager before 3.0.3 delivered a SSL private key in a Java application (JAR file) for authentication to Sentinel, allowing attackers to extract and establish their own connections to the Sentinel appliance.
It was noticed that a malicious process impersonating an Impala daemon in Apache Impala (incubating) 2.7.0 to 2.8.0 could cause Impala daemons to skip authentication checks when Kerberos is enabled (but TLS is not). If the malicious server responds with 'COMPLETE' before the SASL handshake has completed, the client will consider the handshake as completed even though no exchange of credentials has happened.
A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.
EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains an Improper Authentication vulnerability that could potentially be exploited by malicious users to compromise the affected system.
Multiple unspecified vulnerabilities in the template files in Soumu Workflow for Groupmax 01-00 through 01-01, Soumu Workflow 02-00 through 03-03, and Koukyoumuke Soumu Workflow 01-00 through 01-01 allow remote attackers to bypass authentication mechanisms on web pages via unknown vectors.
EMC Isilon InsightIQ 4.1.0, 4.0.1, 4.0.0, 3.2.2, 3.2.1, 3.2.0, 3.1.1, 3.1.0, 3.0.1, 3.0.0 is affected by an authentication bypass vulnerability that could potentially be exploited by attackers to compromise the affected system.
VCM5010 with software versions earlier before V100R002C50SPC100 has an authentication bypass vulnerability. This is due to improper implementation of authentication for accessing web pages. An unauthenticated attacker could bypass the authentication by sending a crafted HTTP request. 5010 with software versions earlier before V100R002C50SPC100 has an arbitrary file upload vulnerability. The software does not validate the files that uploaded. An authenticated attacker could upload arbitrary files to the system.
A vulnerability has been found in Airfield Online and classified as problematic. This vulnerability affects the path /backups/ of the MySQL backup handler. An attacker is able to get access to sensitive data without proper authentication. It is recommended to the change the configuration settings.
WAPM-1166D firmware Ver.1.2.7 and earlier, WAPM-APG600H firmware Ver.1.16.1 and earlier allows remote attackers to bypass authentication and access the configuration interface via unspecified vectors.
The GOautodial API prior to commit 3c3a979 made on October 13th, 2021 exposes an API router that accepts a username, password, and action that routes to other PHP files that implement the various API functions. Vulnerable versions of GOautodial validate the username and password incorrectly, allowing the caller to specify any values for these parameters and successfully authenticate. CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C
Affected versions of Atlassian Jira Server and Data Center allow a user who has had their Jira Service Management access revoked to export audit logs of another user's Jira Service Management project via a Broken Authentication vulnerability in the /plugins/servlet/audit/resource endpoint. The affected versions of Jira Server and Data Center are before version 8.19.1.
An issue was discovered on NETGEAR WNR1000V4 1.1.0.54 devices. The web management interface (setup.cgi) has an authentication bypass and other problems that ultimately allow an attacker to remotely compromise the device from a malicious webpage. The attacker sends an FW_remote.htm&todo=cfg_init request without a cookie, reads the Set-Cookie header in the 401 Unauthorized response, and then repeats the FW_remote.htm&todo=cfg_init request with the specified cookie.
Paid To Read Script 2.0.5 has authentication bypass in the admin panel via a direct request, as demonstrated by the admin/viewvisitcamp.php fn parameter and the admin/userview.php uid parameter.
The UserPro plugin before 4.9.17.1 for WordPress, when used on a site with the "admin" username, allows remote attackers to bypass authentication and obtain administrative access via a "true" value for the up_auto_log parameter in the QUERY_STRING to the default URI.
The Google Authenticator login module 6.x-1.x before 6.x-1.2 and 7.x-1.x before 7.x-1.4 for Drupal allows remote attackers to obtain access by replaying the username, password, and one-time password (OTP).
The login page in the Console in IBM InfoSphere Optim Data Growth for Oracle E-Business Suite 6.x, 7.x, and 9.x before 9.1.0.3 does not limit the number of incorrect authentication attempts, which makes it easier for remote attackers to obtain access via a brute-force attack.
A Security Bypass vulnerability exists in Zavio IP Cameras through 1.6.3 because the RTSP protocol authentication is disabled by default, which could let a malicious user obtain unauthorized access to the live video stream.
The administrative web interface in Cisco Video Surveillance Operations Manager does not properly perform authentication, which allows remote attackers to watch video feeds via a crafted URL, aka Bug ID CSCtg72262.
FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. By default, SIP requests of the type SUBSCRIBE are not authenticated in the affected versions of FreeSWITCH. Abuse of this security issue allows attackers to subscribe to user agent event notifications without the need to authenticate. This abuse poses privacy concerns and might lead to social engineering or similar attacks. For example, attackers may be able to monitor the status of target SIP extensions. Although this issue was fixed in version v1.10.6, installations upgraded to the fixed version of FreeSWITCH from an older version, may still be vulnerable if the configuration is not updated accordingly. Software upgrades do not update the configuration by default. SIP SUBSCRIBE messages should be authenticated by default so that FreeSWITCH administrators do not need to explicitly set the `auth-subscriptions` parameter. When following such a recommendation, a new parameter can be introduced to explicitly disable authentication.
In Joomla! before 3.8.2, a bug allowed third parties to bypass a user's 2-factor authentication method.
An Authentication Bypass vulnerability exists in upnp/asf-mp4.asf when streaming live video in D-Link TESCO DCS-2121 1.05_TESCO, TESCO DCS-2102 1.05_TESCO, DCS-2121 1.06_FR, 1.06, and 1.05_RU, DCS-2102 1.06_FR. 1.06, and 1.05_RU, which could let a malicious user obtain sensitive information.
The Inter-Satellite Sync (ISS) operation in Red Hat Network (RHN) Satellite 5.3, 5.4, and 5.5 does not properly check client "authenticity," which allows remote attackers to obtain channel content by skipping the initial authentication call.
SAP Business Intelligence Promotion Management Application, Enterprise 4.10, 4.20, and 4.30, does not perform authentication checks for functionalities that require user identity.
Alcatel-Lucent OmniVista 8770 2.0 through 3.0 exposes different ORBs interfaces, which can be queried using the GIOP protocol on TCP port 30024. An attacker can bypass authentication, and OmniVista invokes methods (AddJobSet, AddJob, and ExecuteNow) that can be used to run arbitrary commands on the server, with the privilege of NT AUTHORITY\SYSTEM on the server. NOTE: The discoverer states "The vendor position is to refer to the technical guidelines of the product security deployment to mitigate this issue, which means applying proper firewall rules to prevent unauthorised clients to connect to the OmniVista server."
A vulnerability classified as critical was found in Telecommunication Software SAMwin Contact Center Suite 5.1. This vulnerability affects the function passwordScramble in the library SAMwinLIBVB.dll of the component Password Handler. Incorrect implementation of a hashing function leads to predictable authentication possibilities. Upgrading to version 6.2 is able to address this issue. It is recommended to upgrade the affected component.
An attacker can log into the local Niagara platform (Niagara AX Framework Versions 3.8 and prior or Niagara 4 Framework Versions 4.4 and prior) using a disabled account name and a blank password, granting the attacker administrator access to the Niagara system.
Domain Technologie Control (DTC) before 0.32.9 does not require authentication for (1) admin/bw_per_month.php and (2) client/bw_per_month.php, which allows remote attackers to obtain potentially sensitive bandwidth information via a direct request.
Axway Secure Messenger before 6.5 Updated Release 7, as used in Axway Email Firewall, provides different responses to authentication requests depending on whether the user exists, which allows remote attackers to enumerate users via a series of requests.