A vulnerability in the IPv6 Simple Network Management Protocol (SNMP) code of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause high CPU usage or a reload of the device. The vulnerability is due to IPv6 sub block corruption. An attacker could exploit this vulnerability by polling the affected device IPv6 information. An exploit could allow the attacker to trigger high CPU usage or a reload of the device. Known Affected Releases: Denali-16.3.1. Cisco Bug IDs: CSCvb14640.

Cisco IOS 15.0 and 15.1 on Catalyst 3560 and 3750 series switches allows remote authenticated users to cause a denial of service (device reload) by completing local web authentication quickly, aka Bug ID CSCts88664.

The L2TP module in Cisco IOS XE 3.10S(.2) and earlier on ASR 1000 routers allows remote authenticated users to cause a denial of service (ESP card reload) via a malformed L2TP packet, aka Bug ID CSCun09973.

Cisco IOS XE 3.8S(.2) and earlier does not properly use a DHCP pool during assignment of an IP address, which allows remote authenticated users to cause a denial of service (device reload) via an AAA packet that triggers an address requirement, aka Bug ID CSCuh04949.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco Wireless LAN Controllers could allow an authenticated, remote attacker to cause an affected device to restart, resulting in a denial of service (DoS) condition. The vulnerability is due to a memory leak that occurs on an affected device after the device fails to deallocate a buffer that is used when certain MIBs are polled. An attacker who knows the SNMP Version 2 SNMP Read string or has valid SNMP Version 3 credentials for an affected device could repeatedly poll the affected MIB object IDs (OIDs) and consume available memory on the device. When memory is sufficiently depleted on the device, the device will restart, resulting in a DoS condition. Cisco Bug IDs: CSCvc71674.

The IKEv2 client and initiator implementations in Cisco IOS 15.5(3)M and IOS XE allow remote IKEv2 servers to cause a denial of service (device reload) via crafted IKEv2 packets, aka Bug ID CSCux97540.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. This vulnerability is due to improper control of a resource. An attacker with the ability to spoof a trusted IKEv2 site-to-site VPN peer and in possession of valid IKEv2 credentials for that peer could exploit this vulnerability by sending malformed, authenticated IKEv2 messages to an affected device. A successful exploit could allow the attacker to trigger a reload of the device.

The RADIUS client implementation in Cisco IOS 15.4(3)M2.2, when a shared RADIUS secret is configured, allows remote RADIUS servers to cause a denial of service (device reload) via malformed answers, aka Bug ID CSCuu59324.

The SNMP implementation in Cisco IOS 15.1(2)SG4 on Catalyst 4500 devices, when single-switch Virtual Switching System (VSS) is configured, allows remote authenticated users to cause a denial of service (device crash) by performing SNMP polling, aka Bug ID CSCuq04574.

The SNMP implementation in Cisco NX-OS 6.1(2)I2(3) on Nexus 9000 devices, when a Reset High Availability (HA) policy is configured, allows remote authenticated users to cause a denial of service (device reload) via unspecified vectors, aka Bug ID CSCuq92240.

The IKE implementation in the WS-IPSEC-3 service module in Cisco IOS 12.2 on Catalyst 6500 devices allows remote authenticated users to cause a denial of service (device reload) by sending a crafted message during IPsec tunnel setup, aka Bug ID CSCur70505.

Cisco Adaptive Security Appliance (ASA) Software 9.1(.5) and earlier allows remote authenticated users to cause a denial of service (device reload) via crafted attributes in a RADIUS packet, aka Bug ID CSCun69561.

The web framework in Cisco Transport Gateway for Smart Call Home (aka TG-SCH or Transport Gateway Installation Software) does not validate an unspecified parameter, which allows remote authenticated users to cause a denial of service (service crash) via a crafted string, aka Bug ID CSCuq31819.

The Proxy Bypass Content Rewriter feature in the WebVPN subsystem in Cisco Adaptive Security Appliance (ASA) Software 9.1(.2) and earlier allows remote authenticated users to cause a denial of service (device crash or error-recovery event) via an HTTP request that triggers a rewrite, aka Bug ID CSCug91577.

Open Network Environment Platform (ONEP) in Cisco NX-OS allows remote authenticated users to cause a denial of service (network-element reload) via a crafted packet, aka Bug ID CSCui51551.

The Media Snapshot implementation on Cisco TelePresence Multipoint Switch (CTMS) devices allows remote authenticated users to cause a denial of service (device reload) by sending many Media Snapshot requests at the time of a meeting termination, aka Bug ID CSCuh44796.

The Web Administrator Interface on Cisco Wireless LAN Controller (WLC) devices allows remote authenticated users to cause a denial of service (device crash) by leveraging membership in the Full Manager managers group, Read Only managers group, or Lobby Ambassador managers group, and sending a request that (1) lacks a parameter value or (2) contains a malformed parameter value, aka Bug IDs CSCuh14313, CSCuh14159, CSCuh14368, and CSCuh14436.

The FlexVPN implementation in Cisco IOS 15.2 and 15.3 allows remote authenticated users to cause a denial of service (spoke crash) via spoke-to-spoke traffic, aka Bug ID CSCtz02622.

The XML parser in the Cisco Jabber IM application for Android allows remote authenticated users to cause a denial of service (blocked connection) by leveraging an entry on a Buddy list and sending a crafted XMPP presence update message, aka Bug ID CSCue38383.

The ISM module in Cisco IOS on ISR G2 routers does not properly handle authentication-header packets, which allows remote authenticated users to cause a denial of service (module reload) via a series of malformed packets, aka Bug ID CSCub92025.

Cisco Adaptive Security Appliances (ASA) devices with firmware 8.4 do not properly validate unspecified input related to UNC share pathnames, which allows remote authenticated users to cause a denial of service (device crash) via unknown vectors, aka Bug ID CSCuc65775.

screens/base/web_auth_custom.html on Cisco Wireless LAN Controller (WLC) devices with software 7.2.110.0 allows remote authenticated users to cause a denial of service (device reload) via a certain buttonClicked value in an internal webauth_type request, aka Bug ID CSCud50209.

Cisco IOS 15.0 through 15.3 allows remote authenticated users to cause a denial of service (device crash) via an MVPNv6 update, aka Bug ID CSCty89224.

Cisco IOS before 15.1(2)SY allows remote authenticated users to cause a denial of service (device crash) by establishing an SSH session from a client and then placing this client into a (1) slow or (2) idle state, aka Bug ID CSCto87436.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software on Catalyst 4500 Series Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient input validation when the software processes specific SNMP object identifiers. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: To exploit this vulnerability by using SNMPv2c or earlier, the attacker must know the SNMP read-only community string for an affected system. To exploit this vulnerability by using SNMPv3, the attacker must know the user credentials for the affected system.

A vulnerability in the Simple Network Management Protocol (SNMP) implementation in Cisco ASR 920 Series Aggregation Services Router model ASR920-12SZ-IM could allow an authenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect handling of data that is returned for Cisco Discovery Protocol queries to SNMP. An attacker could exploit this vulnerability by sending a request for Cisco Discovery Protocol information by using SNMP. An exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

Cisco IOS 15.1 and 15.2 and IOS XE 3.x, when configured as an IPsec hub with X.509 certificates in use, allows remote authenticated users to cause a denial of service (segmentation fault and device crash) via unspecified vectors, aka Bug ID CSCtq61128.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software running on certain models of Cisco Catalyst Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition, aka a GET MIB Object ID Denial of Service Vulnerability. The vulnerability is due to a condition that could occur when the affected software processes an SNMP read request that contains a request for the ciscoFlashMIB object ID (OID). An attacker could trigger this vulnerability by issuing an SNMP GET request for the ciscoFlashMIB OID on an affected device. A successful exploit could cause the affected device to restart due to a SYS-3-CPUHOG. This vulnerability affects the following Cisco devices if they are running a vulnerable release of Cisco IOS Software and are configured to use SNMP Version 2 (SNMPv2) or SNMP Version 3 (SNMPv3): Cisco Catalyst 2960-L Series Switches, Cisco Catalyst Digital Building Series Switches 8P, Cisco Catalyst Digital Building Series Switches 8U. Cisco Bug IDs: CSCvd89541.

A vulnerability in Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper management of memory resources, referred to as a double free. An attacker could exploit this vulnerability by sending crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. To exploit this vulnerability via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for an affected system. To exploit this vulnerability via SNMP Version 3, the attacker must know the user credentials for the affected system. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, have been configured to be queried over SNMP, and have Network Address Translation (NAT) enabled. Cisco Bug IDs: CSCve75818.

The IOS FTP Server in Cisco IOS 11.3 through 12.4 allows remote authenticated users to cause a denial of service (IOS reload) via unspecified vectors involving transferring files (aka bug ID CSCse29244).

Cisco Adaptive Security Appliance (ASA) Software, when certain same-security-traffic and management-access options are enabled, allows remote authenticated users to cause a denial of service (stack overflow and device reload) by using the clientless SSL VPN portal for internal-resource browsing, aka Bug ID CSCui51199.

Cisco Adaptive Security Appliances (ASA) devices with firmware 8.x through 8.4(1) do not properly manage SSH sessions, which allows remote authenticated users to cause a denial of service (device crash) by establishing multiple sessions, aka Bug ID CSCtc59462.

Cisco IOS 12.2, 12.3, 12.4, 15.0, and 15.1, when the data-link switching (DLSw) feature is configured, allows remote attackers to cause a denial of service (device crash) by sending a sequence of malformed packets and leveraging a "narrow timing window," aka Bug ID CSCtf74999, a different vulnerability than CVE-2007-0199, CVE-2008-1152, and CVE-2009-0629.

A vulnerability in the Bulk Administration Tool (BAT) for Cisco Unity Connection could allow an authenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software does not restrict the maximum size of certain files that can be written to disk. An attacker who has valid administrator credentials for an affected system could exploit this vulnerability by sending a crafted, remote connection request to an affected system. A successful exploit could allow the attacker to write a file that consumes most of the available disk space on the system, causing application functions to operate abnormally and leading to a DoS condition.

A vulnerability in the Shell Access Filter feature of Cisco Firepower Management Center (FMC), when used in conjunction with remote authentication, could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability occurs because the configuration of the Shell Access Filter, when used with a specific type of remote authentication, can cause a system file to have unbounded writes. An attacker could exploit this vulnerability by sending a steady stream of remote authentication requests to the appliance when the specific configuration is applied. Successful exploitation could allow the attacker to increase the size of a system log file so that it consumes most of the disk space. The lack of available disk space could lead to a DoS condition in which the device functions could operate abnormally, making the device unstable.

A vulnerability in the Forwarding Information Base (FIB) code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, network attacker to cause a denial of service (DoS) condition. The vulnerability is due to a limitation in the way the FIB is internally representing recursive routes. An attacker could exploit this vulnerability by injecting routes into the routing protocol that have a specific recursive pattern. The attacker must be in a position on the network that provides the ability to inject a number of recursive routes with a specific pattern. An exploit could allow the attacker to cause an affected device to reload, creating a DoS condition. Cisco Bug IDs: CSCva91655.

A vulnerability in the netconf interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on affected system. The vulnerability is due to improper handling of malformed requests processed by the netconf process. An attacker could exploit this vulnerability by sending malicious requests to the affected software. An exploit could allow the attacker to cause the targeted process to restart, resulting in a DoS condition on the affected system. Cisco Bug IDs: CSCvg95792.

A vulnerability in the Rate Limiting Network Address Translation (NAT) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause high CPU utilization in the Cisco QuantumFlow Processor of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to mishandling of the rate limiting feature within the QuantumFlow Processor. An attacker could exploit this vulnerability by sending large amounts of traffic that would be subject to NAT and rate limiting through an affected device. A successful exploit could allow the attacker to cause the QuantumFlow Processor utilization to reach 100 percent on the affected device, resulting in a DoS condition.

A vulnerability in the RADIUS feature of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause the affected system to stop processing RADIUS packets. This vulnerability is due to improper handling of certain RADIUS requests. An attacker could exploit this vulnerability by attempting to authenticate to a network or a service where the access server is using Cisco ISE as the RADIUS server. A successful exploit could allow the attacker to cause Cisco ISE to stop processing RADIUS requests, causing authentication/authorization timeouts, which would then result in legitimate requests being denied access. Note: To recover the ability to process RADIUS packets, a manual restart of the affected Policy Service Node (PSN) is required. See the Details section for more information.

A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072.

A vulnerability in the data plane microcode of Lightspeed-Plus line cards for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the line card to reset. This vulnerability is due to the incorrect handling of malformed packets that are received on the Lightspeed-Plus line cards. An attacker could exploit this vulnerability by sending a crafted IPv4 or IPv6 packet through an affected device. A successful exploit could allow the attacker to cause the Lightspeed-Plus line card to reset, resulting in a denial of service (DoS) condition for any traffic that traverses that line card.

A vulnerability in the management web server of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker with high privileges to execute configuration commands on an affected system. This vulnerability exists because access to HTTPS endpoints is not properly restricted on an affected device. An attacker could exploit this vulnerability by sending specific messages to the affected HTTPS handler. A successful exploit could allow the attacker to perform configuration changes on the affected system, which should be configured and managed only through Cisco Firepower Management Center (FMC) Software.

Multiple vulnerabilities in Cisco Secure Client Software, formerly AnyConnect Secure Mobility Client, could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected system. These vulnerabilities are due to an out-of-bounds memory read from Cisco Secure Client Software. An attacker could exploit these vulnerabilities by logging in to an affected device at the same time that another user is accessing Cisco Secure Client on the same system, and then sending crafted packets to a port on that local host. A successful exploit could allow the attacker to crash the VPN Agent service, causing it to be unavailable to all users of the system. To exploit these vulnerabilities, the attacker must have valid credentials on a multi-user system.

A vulnerability in the DNS functionality of Cisco Nexus Dashboard Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of DNS requests. An attacker could exploit this vulnerability by sending a continuous stream of DNS requests to an affected device. A successful exploit could allow the attacker to cause the coredns service to stop working or cause the device to reload, resulting in a DoS condition.

A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.

Memory leak on the Cisco Physical Access Gateway with software before 1.1 allows remote attackers to cause a denial of service (memory consumption) via unspecified TCP packets.

A vulnerability in Cisco TelePresence CE and RoomOS could allow an unauthenticated, adjacent attacker to view sensitive information on an affected device. This vulnerability exists because the affected software performs improper bounds checks. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to cause an out-of-bounds read that discloses sensitive information. Note: This vulnerability only affects Cisco Webex Desk Hub. There are no workarounds that address this vulnerability.

A vulnerability in the SSH service of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to cause a process crash, resulting in a DoS condition for SSH access only. This vulnerability does not prevent the system from continuing to function, and web UI access is not affected. This vulnerability is due to insufficient resource management when an affected system is in an error condition. An attacker could exploit this vulnerability by sending malicious traffic to the affected system. A successful exploit could allow the attacker to cause the SSH process to crash and restart, resulting in a DoS condition for the SSH service.

Memory leak on the Cisco Wireless LAN Controller (WLC) platform 4.x before 4.2.205.0, 5.1 before 5.1.163.0, and 5.0 and 5.2 before 5.2.178.0, as used in Cisco 1500 Series, 2000 Series, 2100 Series, 4100 Series, 4200 Series, and 4400 Series Wireless Services Modules (WiSM), WLC Modules for Integrated Services Routers, and Catalyst 3750G Integrated Wireless LAN Controllers, allows remote attackers to cause a denial of service (memory consumption and device reload) via SSH management connections, aka Bug ID CSCsw40789.

Cisco IOS 12.0(32)S12 through 12.0(32)S13 and 12.0(33)S3 through 12.0(33)S4, 12.0(32)SY8 through 12.0(32)SY9, 12.2(33)SXI1, 12.2XNC before 12.2(33)XNC2, 12.2XND before 12.2(33)XND1, and 12.4(24)T1; and IOS XE 2.3 through 2.3.1t and 2.4 through 2.4.0; when RFC4893 BGP routing is enabled, allows remote attackers to cause a denial of service (memory corruption and device reload) by using an RFC4271 peer to send an update with a long series of AS numbers, aka Bug ID CSCsy86021.