D-Link DIR-865L Ax 1.20B01 Beta devices allow CSRF.

CSRF exists on D-Link DIR-868L devices, leading to (for example) a change to the Admin password. hedwig.cgi and pigwidgeon.cgi are two of the affected components.

An issue was discovered on D-Link DCS-1130 devices. The device provides a crossdomain.xml file with no restrictions on who can access the webserver. This allows an hosted flash file on any domain to make calls to the device's webserver and pull any information that is stored on the device. In this case, user's credentials are stored in clear text on the device and can be pulled easily. It also seems that the device does not implement any cross-site scripting forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a cross-site flashing attack on the user's browser and execute any action on the device provided by the web management interface which steals the credentials from tools_admin.cgi file's response and displays it inside a Textfield.

D-Link DCS cameras have a weak/insecure CrossDomain.XML file that allows sites hosting malicious Flash objects to access and/or change the device's settings via a CSRF attack. This is because of the 'allow-access-from domain' child element set to *, thus accepting requests from any domain. If a victim logged into the camera's web console visits a malicious site hosting a malicious Flash file from another Browser tab, the malicious Flash file then can send requests to the victim's DCS series Camera without knowing the credentials. An attacker can host a malicious Flash file that can retrieve Live Feeds or information from the victim's DCS series Camera, add new admin users, or make other changes to the device. Known affected devices are DCS-933L with firmware before 1.13.05, DCS-5030L, DCS-5020L, DCS-2530L, DCS-2630L, DCS-930L, DCS-932L, and DCS-932LB1.

Cross Site Request Forgery (CSRF) on D-Link DSL-2730U C1 IN_1.00 devices allows remote attackers to change the DNS or firewall configuration or any password.

CSRF exists on D-Link DIR-600M Rev. Cx devices before v3.05ENB01_beta_20170306. This can be used to bypass authentication and insert XSS sequences or possibly have unspecified other impact.

Cross-site request forgery (CSRF) vulnerability in D-Link DCS-931L with firmware 1.04 and earlier allows remote attackers to hijack the authentication of unspecified victims via unknown vectors.

Cross-site request forgery (CSRF) vulnerability in D-Link DIR-815 devices with firmware before 2.07.B01 allows remote attackers to hijack the authentication of arbitrary users for requests that insert XSS sequences.

D-Link DIR-601 B1 2.00NA devices have CSRF because no anti-CSRF token is implemented. A remote attacker could exploit this in conjunction with CVE-2019-16327 to enable remote router management and device compromise. NOTE: this is an end-of-life product.

D-Link DIR-655 C devices before 3.02B05 BETA03 allow CSRF for the entire management console.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP 1150 with firmware 1.2.94 allow remote attackers to hijack the authentication of administrators for requests that (1) enable or (2) disable the DMZ in the Firewall/DMZ section via a request to index.cgi or (3) add, (4) modify, or (5) delete URL-filter settings in the Control/URL-filter section via a request to index.cgi, as demonstrated by adding a rule that blocks access to google.com.

Cross-site request forgery (CSRF) vulnerability in D-Link DWR-113 (Rev. Ax) with firmware before 2.03b02 allows remote attackers to hijack the authentication of administrators for requests that change the admin password via unspecified vectors.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP-1360 router with firmware 2.5.4 and earlier allow remote attackers to hijack the authentication of unspecified users for requests that (1) change the MAC filter restrict mode, (2) add a MAC address to the filter, or (3) remove a MAC address from the filter via a crafted request to index.cgi.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP-1360 with firmware 2.5.4 and earlier allow remote attackers to hijack the authentication of unspecified users for requests that change the (1) Enable Wireless, (2) MBSSID, (3) BSSID, (4) Hide Access Point, (5) SSID, (6) Country, (7) Channel, (8) Wireless mode, or (9) Max Associated Clients setting via a crafted request to index.cgi.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR-600 router (rev. Bx) with firmware before 2.17b02 allow remote attackers to hijack the authentication of administrators for requests that (1) create an administrator account or (2) enable remote management via a crafted configuration module to hedwig.cgi, (3) activate new configuration settings via a SETCFG,SAVE,ACTIVATE action to pigwidgeon.cgi, or (4) send a ping via a ping action to diagnostic.php.

D-Link DIR-100 4.03B07: cli.cgi CSRF

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DSL-2740B Gateway with firmware EU_1.00 allow remote attackers to hijack the authentication of administrators for requests that (1) enable or disable Wireless MAC Address Filters via a wlFltMode action to wlmacflt.cmd, (2) enable or disable firewall protections via a request to scdmz.cmd, or (3) enable or disable remote management via a save action to scsrvcntr.cmd.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR865L router (Rev. A1) with firmware before 1.05b07 allow remote attackers to hijack the authentication of administrators for requests that (1) change the administrator password or (2) enable remote management via a request to hedwig.cgi or (3) activate configuration changes via a request to pigwidgeon.cgi.

Cross-site request forgery (CSRF) vulnerability in setup/security.cgi in D-Link DCS-900, DCS-2000, and DCS-5300 allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the rootpass parameter.

Cross-site request forgery (CSRF) vulnerability in redpass.cgi in D-Link DSL-2640B Firmware EU_4.00 allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the sysPassword parameter.

Multiple cross-site request forgery (CSRF) vulnerabilities in the D-Link DIR-816L Wireless Router with firmware before 2.06.B09_BETA allow remote attackers to hijack the authentication of administrators for requests that (1) change the admin password, (2) change the network policy, or (3) possibly have other unspecified impact via crafted requests to hedwig.cgi and pigwidgeon.cgi.

D-Link DIR-615 HW: T1 FW:20.09 is vulnerable to Cross-Site Request Forgery (CSRF) vulnerability. This enables an attacker to perform an unwanted action on a wireless router for which the user/admin is currently authenticated, as demonstrated by changing the Security option from WPA2 to None, or changing the hiddenSSID parameter, SSID parameter, or a security-option password.

D-Link DCS-936L devices with firmware before 1.05.07 have an inadequate CSRF protection mechanism that requires the device's IP address to be a substring of the HTTP Referer header.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of changing the administrative password for the web management interface. It seems that the device does not implement any cross-site request forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface to change the user's password.

D-Link DIR-601 A1 1.02NA devices do not require the old password for a password change, which occurs in cleartext.

D-Link DGS-1100 devices with Rev.B firmware 1.01.018 have a hardcoded SSL private key, which allows man-in-the-middle attackers to spoof devices by hijacking an HTTPS session.

D-Link DIR-100 4.03B07: cli.cgi security bypass due to failure to check authentication parameters

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the POST parameters passed in this request (to test if email credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The library "libmailutils.so" is the one that has the vulnerable function "sub_1FC4" that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows an ARM little endian format. The function sub_1FC4 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "receiver1" is extracted in function "sub_15AC" which is then passed to the vulnerable system API call. The vulnerable library function is accessed in "cgibox" binary at address 0x00023BCC which calls the "Send_mail" function in "libmailutils.so" binary as shown below which results in the vulnerable POST parameter being passed to the library which results in the command injection issue.

D-Link DIR-853 A1 FW1.20B07 was discovered to contain a stack-based buffer overflow vulnerability via the Password parameter in the SetQuickVPNSettings module.

Multiple cross-site request forgery (CSRF) vulnerabilities on the D-Link DI-524 Wireless Router with firmware 9.01 allow remote attackers to (1) change the admin password, (2) reboot the device, or (3) possibly have unspecified other impact via crafted requests to CGI programs.

Cross Site Request Forgery vulnerability in DLink DWR 2000M 5G CPE With Wifi 6 Ax1800 and Dlink DWR 5G CPE DWR-2000M_1.34ME allows a local attacker to obtain sensitive information via the Port forwarding option.

Cross-site request forgery (CSRF) vulnerability in pixelpost 1.7.3 could allow remote attackers to change the admin password.

A vulnerability classified as problematic has been found in OpenACS bug-tracker. Affected is an unknown function of the file lib/nav-bar.adp of the component Search. The manipulation leads to cross-site request forgery. It is possible to launch the attack remotely. The name of the patch is aee43e5714cd8b697355ec3bf83eefee176d3fc3. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-217440.

An issue was discovered in AKCMS 6.1. CSRF can add an admin account via a /index.php?file=account&action=manageaccounts&job=newaccount URI.

IBM Disposal and Governance Management for IT and IBM Global Retention Policy and Schedule Management, components of IBM Atlas Policy Suite 6.0.3 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. IBM Reference #: 2000771.

Cross-site request forgery (CSRF) vulnerability in Red Hat JBoss BRMS and BPMS 6 allows remote attackers to hijack the authentication of users for requests that modify instances via a crafted web page.

Cross-site request forgery (CSRF) vulnerability in Microsoft Outlook Web Access (owa/ev.owa) 2007 through SP2 allows remote attackers to hijack the authentication of e-mail users for requests that perform Outlook requests, as demonstrated by setting the auto-forward rule.

An issue was discovered in PublicCMS V4.0.20180210. There is a CSRF vulnerability in "admin/sysUser/save.do?callbackType=closeCurrent&navTabId=sysUser/list" that can add an admin account.

Cross-Site Request Forgery (CSRF) vulnerability in PeepSo Community by PeepSo plugin <= 6.0.2.0 versions.

Cross-Site Request Forgery (CSRF) vulnerability in GiveWP GiveWP – Donation Plugin and Fundraising Platform plugin <= 2.25.1 versions.

Cross-Site Request Forgery (CSRF) vulnerability in BoldGrid Post and Page Builder by BoldGrid – Visual Drag and Drop Editor plugin <= 1.24.1 versions.

A CSRF issue was discovered in EasyService Billing 1.0, which was triggered via a quotation-new3-new2.php?add=true&id= URI, as demonstrated by adding a new quotation.

Cross-Site Request Forgery (CSRF) vulnerability in CAGE Web Design | Rolf van Gelder Optimize Database after Deleting Revisions plugin <= 5.1 versions.

The Schema repository server (tibschemad) component of TIBCO Software Inc.'s TIBCO Messaging - Apache Kafka Distribution - Schema Repository - Community Edition, and TIBCO Messaging - Apache Kafka Distribution - Schema Repository - Enterprise Edition contains a vulnerability which may allow an attacker to perform cross-site request forgery (CSRF) attacks. Affected releases are TIBCO Software Inc. TIBCO Messaging - Apache Kafka Distribution - Schema Repository - Community Edition: 1.0.0, and TIBCO Messaging - Apache Kafka Distribution - Schema Repository - Enterprise Edition: 1.0.0.

Cross-Site Request Forgery (CSRF) vulnerability in Oliver Seidel, Bastian Germann cformsII plugin <= 15.0.4 versions.

Cross-Site Request Forgery (CSRF) vulnerability in WattIsIt PayGreen – Ancienne version plugin <= 4.10.2 versions.

Cross-Site Request Forgery (CSRF) vulnerability in Podlove Podlove Subscribe button plugin <= 1.3.7 versions.

Cross-Site Request Forgery (CSRF) vulnerability in Reservation.Studio Reservation.Studio widget plugin <= 1.0.11 versions.

Cross-site request forgery (CSRF) vulnerability in Redback before 1.2.4, as used in Apache Archiva 1.0 through 1.0.3, 1.1 through 1.1.4, 1.2 through 1.2.2, and 1.3 through 1.3.1; and Apache Continuum 1.3.6, 1.4.0, and 1.1 through 1.2.3.1; allows remote attackers to hijack the authentication of administrators for requests that modify credentials.

An issue was discovered in CmsEasy 6.1_20180508. There is a CSRF vulnerability that can add an article via /index.php?case=table&act=add&table=archive&admin_dir=admin.