Cypress : https://www.infineon.com/ Cypress Bluetooth Mesh SDK BSA0107_05.01.00-BX8-AMESH-08 is affected by: Buffer Overflow. The impact is: execute arbitrary code (remote). The component is: affected function is pb_transport_handle_frag_. ¶¶ In Cypress Bluetooth Mesh SDK, there is an out-of-bound write vulnerability that can be triggered during mesh provisioning. Because there is no check for mismatched SegN and TotalLength in Transaction Start PDU.

Cypress : https://www.infineon.com/ Cypress Bluetooth Mesh SDK BSA0107_05.01.00-BX8-AMESH-08 is affected by: Buffer Overflow. The impact is: execute arbitrary code (remote). The component is: affected function is lower_transport_layer_on_seg. ¶¶ In Cypress Bluetooth Mesh SDK, there is an out-of-bound write vulnerability that can be triggered by sending a series of segmented packets with inconsistent SegN.

A Stack-Based Buffer Overflow issue was discovered in the Continental AG Infineon S-Gold 2 (PMB 8876) chipset on BMW several models produced between 2009-2010, Ford a limited number of P-HEV vehicles, Infiniti 2013 JX35, Infiniti 2014-2016 QX60, Infiniti 2014-2016 QX60 Hybrid, Infiniti 2014-2015 QX50, Infiniti 2014-2015 QX50 Hybrid, Infiniti 2013 M37/M56, Infiniti 2014-2016 Q70, Infiniti 2014-2016 Q70L, Infiniti 2015-2016 Q70 Hybrid, Infiniti 2013 QX56, Infiniti 2014-2016 QX 80, and Nissan 2011-2015 Leaf. An attacker with a physical connection to the TCU may exploit a buffer overflow condition that exists in the processing of AT commands. This may allow arbitrary code execution on the baseband radio processor of the TCU.

A vulnerability was identified in D-Link DIR-825 3.00b32. This affects the function NMBD_process of the file sserver.c of the component nmbd. Such manipulation leads to buffer overflow. The attack can only be initiated within the local network. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

EDK2's Network Package is susceptible to a buffer overflow vulnerability when handling Server ID option from a DHCPv6 proxy Advertise message. This vulnerability can be exploited by an attacker to gain unauthorized access and potentially lead to a loss of Confidentiality, Integrity and/or Availability.

EDK2's Network Package is susceptible to a buffer overflow vulnerability via a long server ID option in DHCPv6 client. This vulnerability can be exploited by an attacker to gain unauthorized access and potentially lead to a loss of Confidentiality, Integrity and/or Availability.

Tenda AC10U v1.0 US_AC10UV1.0RTL_V15.03.06.49_multi_TDE01 was discovered to contain a stack overflow via the mac parameter in the GetParentControlInfo function.

Tenda AC10U v1.0 US_AC10UV1.0RTL_V15.03.06.49_multi_TDE01 was discovered to contain a stack overflow via the deviceId parameter in the addWifiMacFilter function.

Tenda AC10U v1.0 US_AC10UV1.0RTL_V15.03.06.49_multi_TDE01 was discovered to contain multiple stack overflows in the formSetMacFilterCfg function via the macFilterType and deviceList parameters.

Tenda AC10U v1.0 US_AC10UV1.0RTL_V15.03.06.49_multi_TDE01 was discovered to contain a stack overflow via the domain parameter in the add_white_node function.

A vulnerability was found in NASA cFS up to 7.0.0. This affects the function CFE_MSG_GetSize of the file apps/to_lab/fsw/src/to_lab_passthru_encode.c of the component CCSDS Packet Header Handler. Performing a manipulation results in heap-based buffer overflow. The attacker must have access to the local network to execute the attack. The project was informed of the problem early through an issue report but has not responded yet.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Losant Arduino MQTT Client prior to V2.7. User interaction is not required to exploit this vulnerability. The specific flaw exists within the parsing of MQTT PUBLISH packets. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-6436.

Lack of check of input size can make device memory get corrupted because of buffer overflow in snapdragon automobile, snapdragon mobile and snapdragon wear in versions MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8909W, MSM8996AU, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 439 / SD 429, SD 450, SD 615/16/SD 415, SD 625, SD 636, SD 650/52, SD 712 / SD 710 / SD 670, SD 810, SD 820, SD 820A, SD 835, SD 845 / SD 850, SDA660, SDM439, SDM630, SDM660, SDX20, Snapdragon_High_Med_2016, SXR1130

A vulnerability was found in Tenda W3 1.0.0.3(2204). Affected by this issue is the function formSetCfm of the file /goform/setcfm of the component HTTP Handler. The manipulation of the argument funcpara1 results in stack-based buffer overflow. The attack can only be performed from the local network. The exploit has been made public and could be used.

Buffer overflow in prot_get_ring_space in the bcmdhd4358 Wi-Fi driver on the Samsung Galaxy S6 SM-G920F G920FXXU5EQH7 allows an attacker (who has obtained code execution on the Wi-Fi chip) to overwrite kernel memory due to improper validation of the ring buffer read pointer. The Samsung ID is SVE-2018-12029.

DeltaV Versions 11.3.1, 12.3.1, 13.3.0, 13.3.1, and R5 is vulnerable to a buffer overflow exploit through an open communication port to allow arbitrary code execution.

Autel MaxiCharger AC Elite Business C50 AppAuthenExchangeRandomNum Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Autel MaxiCharger AC Elite Business C50 EV chargers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the AppAuthenExchangeRandomNum BLE command. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-23384.

Description: A vulnerability in SiLabs Unify Gateway 1.3.1 and earlier allows an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution.

A vulnerability in the Internet Group Management Protocol (IGMP) Snooping feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the IGMP Snooping subsystem. An attacker could exploit this vulnerability by sending crafted IGMP packets to an affected system. An exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCuv79620, CSCvg71263.

Multiple Buffer Overflow vulnerabilities in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCuo17183, CSCvd73487.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom binary called mp4ts under the /var/www/video folder. It seems that this binary dumps the HTTP VERB in the system logs. As a part of doing that it retrieves the HTTP VERB sent by the user and uses a vulnerable sprintf function at address 0x0000C3D4 in the function sub_C210 to copy the value into a string and then into a log file. Since there is no bounds check being performed on the environment variable at address 0x0000C360 this results in a stack overflow and overwrites the PC register allowing an attacker to execute buffer overflow or even a command injection attack.

An issue was discovered in certain Apple products. iOS before 10.3.3 is affected. macOS before 10.12.6 is affected. tvOS before 10.2.2 is affected. The issue involves the "Wi-Fi" component. It allows remote attackers to execute arbitrary code (on the Wi-Fi chip) or cause a denial of service (memory corruption) by leveraging proximity for 802.11.

Description: A vulnerability in SiLabs Z/IP Gateway 7.18.01 and earlier allows an unauthenticated attacker within Z-Wave range to overflow a stack buffer, leading to arbitrary code execution.

The GPT library in the Telegyr 8979 Master Protocol application in SUBNET SubSTATION Server 2 before SSNET 2.12 HF18808 allows remote attackers to cause a denial of service (persistent service crash) via a long RTU-to-Master message.

On the Broadcom Wi-Fi HardMAC SoC with fbt firmware, a stack buffer overflow occurs when handling an 802.11r (FT) authentication response, leading to remote code execution via a crafted access point that sends a long R0KH-ID field in a Fast BSS Transition Information Element (FT-IE).

A vulnerability in the Universal Plug-and-Play (UPnP) implementation in the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, Layer 2-adjacent attacker to execute arbitrary code or cause a denial of service (DoS) condition. The remote code execution could occur with root privileges. The vulnerability is due to incomplete range checks of the UPnP input data, which could result in a buffer overflow. An attacker could exploit this vulnerability by sending a malicious request to the UPnP listening port of the targeted device. An exploit could allow the attacker to cause the device to reload or potentially execute arbitrary code with root privileges. This vulnerability affects all firmware releases of the Cisco CVR100W Wireless-N VPN Router prior to Firmware Release 1.0.1.22. Cisco Bug IDs: CSCuz72642.

Multiple D-Link devices including the DIR-850L firmware versions 1.14B07 and 2.07.B05 contain a stack-based buffer overflow vulnerability in the web administration interface HNAP service.

Multiple buffer overflows in the Cisco Discovery Protocol (CDP) implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(4) and 6.x before 6.1(1), Nexus 5000 and 5500 devices 4.x and 5.x before 5.1(3)N1(1), Nexus 4000 devices before 4.1(2)E1(1h), Nexus 3000 devices 5.x before 5.0(3)U3(1), Nexus 1000V devices 4.x before 4.2(1)SV1(5.1), MDS 9000 devices 4.x and 5.x before 5.2(4), Unified Computing System (UCS) 6100 and 6200 devices before 2.0(2m), and Connected Grid Router (CGR) 1000 devices before CG4(1) allow remote attackers to execute arbitrary code via malformed CDP packets, aka Bug IDs CSCtu10630, CSCtu10551, CSCtu10550, CSCtw56581, CSCtu10548, CSCtu10544, and CSCuf61275.

Buffer overflow in HOME SPOT CUBE2 firmware V101 and earlier allows an attacker to execute arbitrary code via WebUI.

Buffer overflow in TS-WPTCAM firmware version 1.18 and earlier, TS-WPTCAM2 firmware version 1.00, TS-WLCE firmware version 1.18 and earlier, TS-WLC2 firmware version 1.18 and earlier, TS-WRLC firmware version 1.17 and earlier, TS-PTCAM firmware version 1.18 and earlier, TS-PTCAM/POE firmware version 1.18 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

Improper input validation for GATT data packet received in Bluetooth Controller function can lead to possible memory corruption in Snapdragon Mobile in version QCA9379, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 450, SD 615/16/SD 415, SD 625, SD 650/52, SD 820, SD 835, SD 845, SD 850, SDM630, SDM636, SDM660, SDM710, Snapdragon_High_Med_2016.

The Near Field Communication (NFC) module in Huawei Mate 9 Pro mobile phones with the versions before LON-AL00B 8.0.0.340a(C00) has a buffer overflow vulnerability due to the lack of input validation. An attacker may use an NFC card reader or another device to inject malicious data into a target mobile phone. Successful exploit could lead to system restart or arbitrary code execution.

Bluetooth module in some Huawei mobile phones with software LON-AL00BC00B229 and earlier versions has a buffer overflow vulnerability. Due to insufficient input validation, an unauthenticated attacker may craft Bluetooth AVDTP/AVCTP messages after successful paring, causing buffer overflow. Successful exploit may cause code execution.

A vulnerability was found in D-Link DI-8100 16.07.26A1. It has been rated as critical. This issue affects the function auth_asp of the file /auth.asp of the component jhttpd. The manipulation of the argument callback leads to stack-based buffer overflow. The attack needs to be approached within the local network. The exploit has been disclosed to the public and may be used.

In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, while processing a 802.11 management frame, a buffer overflow may potentially occur.

The baseband modules of Mate 10, Mate 10 Pro, Mate 9, Mate 9 Pro Huawei smart phones with software before ALP-AL00 8.0.0.120(SP2C00), before BLA-AL00 8.0.0.120(SP2C00), before MHA-AL00B 8.0.0.334(C00), and before LON-AL00B 8.0.0.334(C00) have a stack overflow vulnerability due to the lack of parameter validation. An attacker could send malicious packets to the smart phones within radio range by special wireless device, which leads stack overflow when the baseband module handles these packets. The attacker could exploit this vulnerability to perform a denial of service attack or remote code execution in baseband module.

Buffer overflow in Corega CG-WGR1200 firmware 2.20 and earlier allows an attacker to execute arbitrary commands via unspecified vectors.

Buffer overflow in Corega CG-WGR1200 firmware 2.20 and earlier allows an attacker to execute arbitrary code via unspecified vectors.

A remote code execution vulnerability in the Android system (bluetooth). Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0. Android ID: A-63146105.

Buffer overflow in btif/src/btif_dm.c in Bluetooth in Android 4.x before 4.4.4, 5.0.x before 5.0.2, 5.1.x before 5.1.1, and 6.x before 2016-05-01 allows remote attackers to execute arbitrary code via a long PIN value, aka internal bug 27411268.

A vulnerability was found in D-Link DI-8100 up to 20250523. It has been classified as critical. Affected is the function httpd_get_parm of the file /login.cgi of the component jhttpd. The manipulation of the argument notify leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in Linux Kernel. Affected is the function l2cap_conn_del of the file net/bluetooth/l2cap_core.c of the component Bluetooth. The manipulation leads to use after free. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-211944.

In Open vSwitch (OvS) 2.5.0, a malformed IP packet can cause the switch to read past the end of the packet buffer due to an unsigned integer underflow in `lib/flow.c` in the function `miniflow_extract`, permitting remote bypass of the access control list enforced by the switch.

A heap overflow vulnerability was found in bluez in versions prior to 5.63. An attacker with local network access could pass specially crafted files causing an application to halt or crash, leading to a denial of service.

Improper handling of the full-buffer case in the Zephyr Bluetooth implementation can result in memory corruption. This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions, and version 1.14.0 and later versions.

Dell WES Wyse Device Agent versions prior to 14.1.2.9 and Dell Wyse ThinLinux HAgent versions prior to 5.4.55 00.10 contain a buffer overflow vulnerability. An unauthenticated attacker may potentially exploit this vulnerability to execute arbitrary code on the system with privileges of the FTP client by sending specially crafted input data to the affected system. The FTP code that contained the vulnerability has been removed.

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business RV Series Routers. An unauthenticated, adjacent attacker could execute arbitrary code or cause an affected router to leak system memory or reload. A memory leak or device reload would cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

While parsing over-the-air information elements in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-07-05, the use of an out-of-range pointer offset can occur.