The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327.
Cisco TFTP Server 1.1 allows remote attackers to cause a denial of service (daemon crash) via a crafted (1) read (aka RRQ) or (2) write (aka WRQ) request, or other TFTP packet. NOTE: some of these details are obtained from third party information.
The web-based management interface on Cisco Small Business 220 devices with firmware before 1.0.1.1 allows remote attackers to cause a denial of service (interface outage) via a crafted HTTP request, aka Bug ID CSCuz76238.
The Neighbor Discovery (ND) protocol implementation in the IPv6 stack in Cisco IOS XE 2.1 through 3.17S, IOS XR 2.0.0 through 5.3.2, and NX-OS allows remote attackers to cause a denial of service (packet-processing outage) via crafted ND messages, aka Bug ID CSCuz66542, as exploited in the wild in May 2016.
The HTTPS Proxy feature in Cisco AsyncOS before 8.5.3-051 and 9.x before 9.0.0-485 on Web Security Appliance (WSA) devices allows remote attackers to cause a denial of service (service outage) by leveraging certain intranet connectivity and sending a malformed HTTPS request, aka Bug ID CSCuu24840.
Cisco TelePresence Video Communications Server (VCS) X8.x before X8.7.2 allows remote attackers to cause a denial of service (service disruption) via a crafted URI in a SIP header, aka Bug ID CSCuy43258.
Cisco Prime Network Analysis Module (NAM) before 6.2(1-b) miscalculates IPv6 payload lengths, which allows remote attackers to cause a denial of service (mond process crash and monitoring outage) via crafted IPv6 packets, aka Bug ID CSCuy37324.
Cisco IOS XR through 5.3.2 mishandles Local Packet Transport Services (LPTS) flow-base entries, which allows remote attackers to cause a denial of service (session drop) by making many connection attempts to open TCP ports, aka Bug ID CSCux95576.
Cisco IOS XR 4.2.3, 4.3.0, 4.3.4, and 5.3.1 on ASR 9000 devices allows remote attackers to cause a denial of service (CRC and symbol errors, and interface flap) via crafted bit patterns in packets, aka Bug ID CSCuv78548.
A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an unauthenticated, remote attacker to cause the web-based management interface to unexpectedly restart. The vulnerability is due to insufficient input validation on the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to cause the interface to restart, resulting in a denial of service (DoS) condition.
A vulnerability in the Secure/Multipurpose Internet Mail Extensions (S/MIME) Decryption and Verification or S/MIME Public Key Harvesting features of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause an affected device to corrupt system memory. A successful exploit could cause the filtering process to unexpectedly reload, resulting in a denial of service (DoS) condition on the device. The vulnerability is due to improper input validation of S/MIME-signed emails. An attacker could exploit this vulnerability by sending a malicious S/MIME-signed email through a targeted device. If Decryption and Verification or Public Key Harvesting is configured, the filtering process could crash due to memory corruption and restart, resulting in a DoS condition. The software could then resume processing the same S/MIME-signed email, causing the filtering process to crash and restart again. A successful exploit could allow the attacker to cause a permanent DoS condition. This vulnerability may require manual intervention to recover the ESA.
A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliances (ESA) could allow an unauthenticated, remote attacker to cause the CPU utilization to increase to 100 percent, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to improper filtering of email messages that contain references to whitelisted URLs. An attacker could exploit this vulnerability by sending a malicious email message that contains a large number of whitelisted URLs. A successful exploit could allow the attacker to cause a sustained DoS condition that could force the affected device to stop scanning and forwarding email messages.
Cisco IOS XR allows remote attackers to cause a denial of service (RSVP process reload) via a malformed RSVP packet, aka Bug ID CSCur69192.
The mobility extension on Cisco Unified IP 9900 phones with firmware 9.4(.1) and earlier allows remote attackers to cause a denial of service (logoff) via crafted packets, aka Bug ID CSCuq12139.
The SMB module in Cisco Wide Area Application Services (WAAS) 6.0(1) allows remote attackers to cause a denial of service (module reload) via an invalid field in a Negotiate Protocol request, aka Bug ID CSCuo75645.
tacacsd in Cisco IOS XR 5.1 and earlier allows remote attackers to cause a denial of service (process reload) via a malformed TACACS+ packet, aka Bug ID CSCum00468.
Cisco Wide Area Application Services (WAAS) 5.3(.5a) and earlier, when SharePoint acceleration is enabled, does not properly parse SharePoint responses, which allows remote attackers to cause a denial of service (application-optimization handler reload) via a crafted SharePoint application, aka Bug ID CSCue47674.
The DHCPv6 implementation in Cisco IOS XR allows remote attackers to cause a denial of service (device crash) via a malformed packet, aka Bug IDs CSCum85558, CSCum20949, CSCul61849, and CSCul71149.
The SSH module in the Integrated Management Controller (IMC) before 2.3.1 in Cisco Unified Computing System on E-Series blade servers allows remote attackers to cause a denial of service (IMC hang) via a crafted SSH packet, aka Bug ID CSCuo69206.
Cisco IOS 15.2(4)M4 on Cisco Unified Border Element (CUBE) devices allows remote attackers to cause a denial of service (input-queue consumption and traffic-processing outage) via crafted RTCP packets, aka Bug ID CSCuj72215.
The DHCPv6 server module in Cisco CNS Network Registrar 7.1 allows remote attackers to cause a denial of service (daemon reload) via a malformed DHCPv6 packet, aka Bug ID CSCuo07437.
The DHCPv6 implementation in Cisco IOS XR allows remote attackers to cause a denial of service (process hang) via a malformed packet, aka Bug ID CSCul80924.
Memory leak in the GUI in the Impact server in Cisco Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (memory consumption) via unspecified vectors, aka Bug ID CSCub58999.
The Java-based software in Cisco Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (closing of TCP ports) via unspecified vectors, aka Bug IDs CSCug77633, CSCug77667, CSCug78266, CSCug82795, and CSCuh58643.
A vulnerability in the peer-to-peer message processing functionality of Cisco Packet Data Network Gateway could allow an unauthenticated, remote attacker to cause the Session Manager (SESSMGR) process on an affected device to restart, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect validation of peer-to-peer packet headers. An attacker could exploit this vulnerability by sending a crafted peer-to-peer packet through an affected device. A successful exploit could allow the attacker to cause the SESSMGR process on the affected device to restart unexpectedly, which could briefly impact traffic while the SESSMGR process restarts and result in a DoS condition. Cisco Bug IDs: CSCvg88786.
A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol component of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper input validation on fields within CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending malicious CAPWAP Discovery Request packets to the Cisco WLC Software. A successful exploit could allow the attacker to cause the Cisco WLC Software to disconnect associated access points (APs). While the APs disconnect and reconnect, service will be unavailable for a brief period of time, resulting in a DoS condition.
A vulnerability in the Session Initiation Protocol (SIP) call-handling functionality of Cisco IP Phone 7800 Series phones and Cisco IP Phone 8800 Series phones could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected phone. The vulnerability is due to incomplete input validation of SIP Session Description Protocol (SDP) parameters by the SDP parser of an affected phone. An attacker could exploit this vulnerability by sending a malformed SIP packet to an affected phone. A successful exploit could allow the attacker to cause all active phone calls on the affected phone to be dropped while the SIP process on the phone unexpectedly restarts, resulting in a DoS condition. Cisco Bug IDs: CSCvf40066.
A vulnerability in the Transport Layer Security (TLS) library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of the affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious TLS message to an interface enabled for Secure Layer Socket (SSL) services on an affected device. Messages using SSL Version 3 (SSLv3) or SSL Version 2 (SSLv2) cannot be be used to exploit this vulnerability. An exploit could allow the attacker to cause a buffer underflow, triggering a crash on an affected device. This vulnerability affects Cisco ASA Software and Cisco FTD Software that is running on the following Cisco products: Adaptive Security Virtual Appliance (ASAv), Firepower Threat Defense Virtual (FTDv), Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCve18902, CSCve34335, CSCve38446.
A vulnerability in the ingress packet processing functionality of the Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software could allow an unauthenticated, remote attacker to cause both control function (CF) instances on an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient handling of user-supplied data by the affected software. An attacker could exploit this vulnerability by sending malicious traffic to the internal distributed instance (DI) network address on an affected system. A successful exploit could allow the attacker to cause an unhandled error condition on the affected system, which would cause the CF instances to reload and consequently cause the entire VPC to reload, resulting in the disconnection of all subscribers and a DoS condition on the affected system. This vulnerability affects Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software N4.0 through N5.5 with the Cisco StarOS operating system 19.2 through 21.3. Cisco Bug IDs: CSCve17656.
A vulnerability in the implementation of Point-to-Point Tunneling Protocol (PPTP) functionality in Cisco Aironet 1810, 1830, and 1850 Series Access Points could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Generic Routing Encapsulation (GRE) frames that pass through the data plane of an affected access point. An attacker could exploit this vulnerability by initiating a PPTP connection to an affected access point from a device that is registered to the same wireless network as the access point and sending a malicious GRE frame through the data plane of the access point. A successful exploit could allow the attacker to cause the NSS core process on the affected access point to crash, which would cause the access point to reload and result in a DoS condition. This vulnerability affects Cisco Aironet 1810, 1830, and 1850 Series Access Points that are running Cisco Mobility Express Software Release 8.4.100.0, 8.5.103.0, or 8.5.105.0 and are configured as a master, subordinate, or standalone access point. Cisco Bug IDs: CSCvf73890.
A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. It is also possible on certain software releases that the ASA will not reload, but an attacker could view sensitive system information without authentication by using directory traversal techniques. The vulnerability is due to lack of proper input validation of the HTTP URL. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition or unauthenticated disclosure of information. This vulnerability applies to IPv4 and IPv6 HTTP traffic. This vulnerability affects Cisco ASA Software and Cisco Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 1000V Cloud Firewall, ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvi16029.
A vulnerability in the SM-1T3/E3 firmware on Cisco Second Generation Integrated Services Routers (ISR G2) and the Cisco 4451-X Integrated Services Router (ISR4451-X) could allow an unauthenticated, remote attacker to cause the ISR G2 Router or the SM-1T3/E3 module on the ISR4451-X to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of user input. An attacker could exploit this vulnerability by first connecting to the SM-1T3/E3 module console and entering a string sequence. A successful exploit could allow the attacker to cause the ISR G2 Router or the SM-1T3/E3 module on the ISR4451-X to reload, resulting in a DoS condition on an affected device.
A vulnerability in the Precision Time Protocol (PTP) feature of Cisco Nexus 5500, 5600, and 6000 Series Switches running Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of protection against PTP frame flood attacks. An attacker could exploit this vulnerability by sending large streams of malicious IPv4 or IPv6 PTP traffic to the affected device. A successful exploit could allow the attacker to cause a DoS condition, impacting the traffic passing through the device.
A vulnerability in the Real-Time Transport Protocol (RTP) bitstream processing of the Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient input validation of incoming RTP bitstreams. An attacker could exploit this vulnerability by sending a crafted RTP bitstream to an affected Cisco Meeting Server. A successful exploit could allow the attacker to deny audio and video services by causing media process crashes resulting in a DoS condition on the affected product. This vulnerability affects Cisco Meeting Server deployments that are running Cisco Meeting Server Software Releases 2.0, 2.1, 2.2, and 2.3. Cisco Bug IDs: CSCve79693, CSCvf91393, CSCvg64656, CSCvh30725, CSCvi86363.
A vulnerability in the IPv6 processing code of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect handling of specific IPv6 hop-by-hop options. An attacker could exploit this vulnerability by sending a malicious IPv6 packet to or through the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device.
A vulnerability in the IPsec driver code of multiple Cisco IOS XE Software platforms and the Cisco ASA 5500-X Series Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to improper processing of malformed IPsec Authentication Header (AH) or Encapsulating Security Payload (ESP) packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to be processed by an affected device. An exploit could allow the attacker to cause a reload of the affected device.
A vulnerability in management interface access control list (ACL) configuration of Cisco NX-OS System Software could allow an unauthenticated, remote attacker to bypass configured ACLs on the management interface. This could allow traffic to be forwarded to the NX-OS CPU for processing, leading to high CPU utilization and a denial of service (DoS) condition. The vulnerability is due to a bad code fix in the 7.3.2 code train that could allow traffic to the management interface to be misclassified and not match the proper configured ACLs. An attacker could exploit this vulnerability by sending crafted traffic to the management interface. An exploit could allow the attacker to bypass the configured management interface ACLs and impact the CPU of the targeted device, resulting in a DoS condition. This vulnerability affects the following Cisco products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvf31132.
The tNetTaskLimit process on the Transport Node Controller (TNC) on Cisco ONS 15454 devices with software 9.6 and earlier does not properly prioritize health pings, which allows remote attackers to cause a denial of service (watchdog timeout and TNC reset) via a flood of network traffic, aka Bug ID CSCud97155.
The SNMP module in Cisco IOS XR allows remote attackers to cause a denial of service (process reload) via a request for an unspecified MIB, aka Bug ID CSCuh43144.
A vulnerability in the XCP Router service of the Cisco Unified Communications Manager IM & Presence Service (CUCM IM&P) and the Cisco TelePresence Video Communication Server (VCS) and Expressway could allow an unauthenticated, remote attacker to cause a temporary service outage for all IM&P users, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious IPv4 or IPv6 packet to an affected device on TCP port 7400. An exploit could allow the attacker to overread a buffer, resulting in a crash and restart of the XCP Router service. Cisco Bug IDs: CSCvg97663, CSCvi55947.
The PPTP-ALG component in CRS Carrier Grade Services Engine (CGSE) and ASR 9000 Integrated Service Module (ISM) in Cisco IOS XR allows remote attackers to cause a denial of service (module reset) via crafted packet streams, aka Bug ID CSCue91963.
A vulnerability in the Interactive Voice Response (IVR) management connection interface for Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to cause the IVR connection to disconnect, creating a system-wide denial of service (DoS) condition. The vulnerability is due to improper handling of a TCP connection request when the IVR connection is already established. An attacker could exploit this vulnerability by initiating a crafted connection to the IP address of the targeted CVP device. An exploit could allow the attacker to disconnect the IVR to CVP connection, creating a DoS condition that prevents the CVP from accepting new, incoming calls while the IVR automatically attempts to re-establish the connection to the CVP. This vulnerability affects Cisco Unified Customer Voice Portal (CVP) Software Release 11.5(1). Cisco Bug IDs: CSCve70560.
Cisco Secure Access Control System (ACS) does not properly implement an incoming-packet firewall rule, which allows remote attackers to cause a denial of service (process crash) via a flood of crafted packets, aka Bug ID CSCui51521.
Buffer overflow in the web-application interface on Cisco 9900 IP phones allows remote attackers to cause a denial of service (webapp interface outage) via long values in unspecified fields, aka Bug ID CSCuh10343.
Cisco Secure Access Control System (ACS) does not properly handle requests to read from the TACACS+ socket, which allows remote attackers to cause a denial of service (process crash) via malformed TCP packets, aka Bug ID CSCuh12488.
Cisco Common Services, as used in Cisco Prime LAN Management Solution (LMS), Cisco Security Manager, Cisco Unified Service Monitor, and Cisco Unified Operations Manager, does not properly interact with the ActiveMQ component, which allows remote attackers to cause a denial of service (memory consumption) via simultaneous TCP sessions, aka Bug IDs CSCuh54766, CSCuh01267, CSCuh95976, and CSCuh95969.
A vulnerability in the software-based SSL/TLS message handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message through an affected device. SSL/TLS messages sent to an affected device do not trigger this vulnerability. A successful exploit could allow the attacker to cause a process to crash. This crash would then trigger a reload of the device. No manual intervention is needed to recover the device after the reload.
The RIP process in Cisco IOS XR allows remote attackers to cause a denial of service (process crash) via a crafted version-2 RIP packet, aka Bug ID CSCue46731.
The Precision Video Engine component in Cisco Jabber for Windows and Cisco Virtualization Experience Media Engine allows remote attackers to cause a denial of service (process crash and call disconnection) via crafted RTP packets, aka Bug IDs CSCuh60706 and CSCue21117.
The RIP service engine in Cisco NX-OS allows remote attackers to cause a denial of service (engine restart) via a malformed (1) RIPv4 or (2) RIPv6 message, aka Bug ID CSCtj73415.