Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allow remote attackers to cause a denial of service (ASDM syslog outage) via a long URL, aka Bug IDs CSCsm11264 and CSCtb92911.

The RADIUS functionality on Cisco Wireless LAN Controller (WLC) devices with software 7.0(250.0) and 7.0(252.0) allows remote attackers to disconnect arbitrary sessions via crafted Disconnect-Request UDP packets, aka Bug ID CSCuw29419.

Cisco Prime Infrastructure 2.2 allows remote attackers to cause a denial of service (daemon hang) by sending many SSL renegotiation requests, aka Bug ID CSCuv56830.

The DHCPv6 server in Cisco IOS on ASR 9000 devices with software 5.2.0 Base allows remote attackers to cause a denial of service (process reset) via crafted packets, aka Bug ID CSCun36525.

Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.1), 8.1 before 8.1(2.37), and 8.2 before 8.2(1.15); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (active IPsec tunnel loss and prevention of new tunnels) via a malformed IKE message through an existing tunnel to UDP port 4500, aka Bug ID CSCtc47782.

The SIP implementation in Cisco IOS 15.5(3)M on Cisco Unified Border Element (CUBE) devices allows remote attackers to cause a denial of service via crafted SIP messages, aka Bug ID CSCuv79202.

The Web Management GUI on Cisco Wireless LAN Controller (WLC) devices with software 7.4(140.0) and 8.0(120.0) allows remote attackers to cause a denial of service (client disconnection) via unspecified vectors, aka Bug ID CSCuw10610.

The DHCPv6 server in Cisco IOS on ASR 9000 devices with software 5.2.0 Base allows remote attackers to cause a denial of service (process reset) via crafted packets, aka Bug ID CSCun72171.

The IPv4 implementation on Cisco ASR 1000 devices with software 15.5(3)S allows remote attackers to cause a denial of service (ESP QFP CPU consumption) by triggering packet fragmentation and reassembly, aka Bug ID CSCuv71273.

A vulnerability in the Ident protocol handler of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability exists because the affected software incorrectly handles memory structures, leading to a NULL pointer dereference. An attacker could exploit this vulnerability by opening a TCP connection to specific ports and sending traffic over that connection. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a missing authentication check in an API call. An attacker who can send a request to an affected system could cause all currently authenticated users to be logged off. Repeated exploitation could cause the inability to maintain a session in the web-based management portal.

Memory leak in the gk_circuit_info_do_in_acf function in the H.323 implementation in Cisco IOS before 15.0(1)XA allows remote attackers to cause a denial of service (memory consumption) via a large number of calls over a long duration, as demonstrated by InterZone Clear Token (IZCT) test traffic, aka Bug ID CSCsz72535.

Cisco IOS XR 5.2.1 allows remote attackers to cause a denial of service (ipv6_io service reload) via a malformed IPv6 packet, aka Bug ID CSCuq95565.

The SSL VPN implementation in Cisco Adaptive Security Appliance (ASA) Software 9.3(.2) and earlier does not properly allocate memory blocks during HTTP packet handling, which allows remote attackers to cause a denial of service (memory consumption) via crafted packets, aka Bug ID CSCuq68888.

Nexus Data Broker (NDB) on Cisco Nexus 3000 devices with software 6.0(2)A6(1) allows remote attackers to cause a denial of service (Java process restart) via crafted connections to the Java application, aka Bug ID CSCut87006.

The packet-reassembly implementation in Cisco IOS XE 3.13S and earlier allows remote attackers to cause a denial of service (CPU consumption or packet loss) via fragmented (1) IPv4 or (2) IPv6 packets that trigger ATTN-3-SYNC_TIMEOUT errors after reassembly failures, aka Bug ID CSCuo37957.

The authentication-manager process in the web framework in Cisco Intrusion Prevention System (IPS) 7.0(8)E4 and earlier in Cisco Intrusion Detection System (IDS) does not properly manage user tokens, which allows remote attackers to cause a denial of service (temporary MainApp hang) via a crafted connection request to the management interface, aka Bug ID CSCuq39550.

Cisco Unified Communications Domain Manager Platform Software 4.4(.3) and earlier allows remote attackers to cause a denial of service (CPU consumption) by sending crafted TCP packets quickly, aka Bug ID CSCuo42063.

Cisco IOS 15.4(3)S0b on ASR901 devices makes incorrect decisions to use the CPU for IPv4 packet processing, which allows remote attackers to cause a denial of service (BGP neighbor flapping) by sending many crafted IPv4 packets, aka Bug ID CSCuo29736.

Cisco ONS 15454 controller cards with software 10.0 and earlier allow remote attackers to cause a denial of service (card reload) via a crafted HTTP URI, aka Bug ID CSCun06870.

Memory leak in the SIP inspection engine in Cisco Adaptive Security Appliance (ASA) Software allows remote attackers to cause a denial of service (memory consumption and instability) via crafted SIP packets, aka Bug ID CSCuf67469.

Cisco ONS 15454 controller cards with software 9.6 and earlier allow remote attackers to cause a denial of service (flash write outage) via a TCP FIN attack that triggers file-descriptor exhaustion, aka Bug ID CSCug97315.

The REST API in Cisco Access Control Server (ACS) 5.5(0.46.2) allows remote attackers to cause a denial of service (API outage) by sending many requests, aka Bug ID CSCut62022.

telnetd in Cisco IOS XR 5.0.1 on Network Convergence System 6000 devices allows remote attackers to cause a denial of service (device reload) via a malformed TELNET packet, aka Bug ID CSCuq31566.

A vulnerability in Cisco 900 Series Aggregation Services Router (ASR) software could allow an unauthenticated, remote attacker to cause a partial denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient handling of certain broadcast packets ingress to the device. An attacker could exploit this vulnerability by sending large streams of broadcast packets to an affected device. If successful, an exploit could allow an attacker to impact services running on the device, resulting in a partial DoS condition.

Cisco Headend System Release allows remote attackers to cause a denial of service (DHCP and TFTP outage) via a flood of crafted UDP traffic, aka Bug ID CSCus04097.

A vulnerability in the Open Shortest Path First (OSPF) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper memory protection mechanisms while processing certain OSPF packets. An attacker could exploit this vulnerability by sending a series of malformed OSPF packets in a short period of time to an affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition for client traffic that is traversing the device.

A vulnerability in the DHCP module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to incorrect processing of certain DHCP packets. An attacker could exploit this vulnerability by sending a crafted DHCP packet to the affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

Multiple vulnerabilities in the Zone-Based Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload or stop forwarding traffic through the firewall. The vulnerabilities are due to incomplete handling of Layer 4 packets through the device. An attacker could exploit these vulnerabilities by sending a certain sequence of traffic patterns through the device. A successful exploit could allow the attacker to cause the device to reload or stop forwarding traffic through the firewall, resulting in a denial of service. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to restart unexpectedly. The vulnerability is due to a lack of sufficient memory management protections under heavy SNMP polling loads. An attacker could exploit this vulnerability by sending a high rate of SNMP requests to the SNMP daemon through the management interface on an affected device. A successful exploit could allow the attacker to cause the SNMP daemon process to consume a large amount of system memory over time, which could then lead to an unexpected device restart, causing a denial of service (DoS) condition. This vulnerability affects all versions of SNMP.

The IKE implementation in Cisco IOS 15.4(1)T and earlier and IOS XE allows remote attackers to cause a denial of service (security-association drop) via crafted Main Mode packets, aka Bug ID CSCun31021.

A vulnerability in the SSH service of the Cisco StarOS operating system could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to a logic error that may occur under specific traffic conditions. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to prevent the targeted service from receiving any traffic, which would lead to a DoS condition on the affected device.

A vulnerability in the SIP inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a crash and reload of an affected device, resulting in a denial of service (DoS) condition.The vulnerability is due to a crash that occurs during a hash lookup for a SIP pinhole connection. An attacker could exploit this vulnerability by sending crafted SIP traffic through an affected device. A successful exploit could allow the attacker to cause a crash and reload of the affected device.

A vulnerability in the Cisco IOx Application Framework of Cisco 809 Industrial Integrated Services Routers (Industrial ISRs), Cisco 829 Industrial ISRs, Cisco CGR 1000 Compute Module, and Cisco IC3000 Industrial Compute Gateway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling during packet processing. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing requests, resulting in a DoS condition.

A vulnerability in the Multi-Pod or Multi-Site network configurations for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to unexpectedly restart the device, resulting in a denial of service (DoS) condition. This vulnerability exists because TCP traffic sent to a specific port on an affected device is not properly sanitized. An attacker could exploit this vulnerability by sending crafted TCP data to a specific port that is listening on a public-facing IP address for the Multi-Pod or Multi-Site configuration. A successful exploit could allow the attacker to cause the device to restart unexpectedly, resulting in a DoS condition.

Cisco ONS 15454 System Software 10.30 and 10.301 allows remote attackers to cause a denial of service (tNetTask CPU consumption or card reset) via a flood of (1) IP or (2) Ethernet traffic, aka Bug ID CSCus57263.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability with the Border Gateway Protocol (BGP) for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to cause a routing process to crash, which could lead to a denial of service (DoS) condition. This vulnerability is due to an issue with the installation of routes upon receipt of a BGP update. An attacker could exploit this vulnerability by sending a crafted BGP update to an affected device. A successful exploit could allow the attacker to cause the routing process to crash, which could cause the device to reload. This vulnerability applies to both Internal BGP (IBGP) and External BGP (EBGP). Note: The Cisco implementation of BGP accepts incoming BGP traffic from explicitly configured peers only. To exploit this vulnerability, an attacker would need to send a specific BGP update message over an established TCP connection that appears to come from a trusted BGP peer.

A vulnerability in the cryptographic hardware accelerator driver of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the affected devices have a limited amount of Direct Memory Access (DMA) memory and the affected software improperly handles resources in low-memory conditions. An attacker could exploit this vulnerability by sending a sustained, high rate of malicious traffic to an affected device to exhaust memory on the device. A successful exploit could allow the attacker to exhaust DMA memory on the affected device, which could cause the device to reload and result in a temporary DoS condition.

A vulnerability in IPv6 ingress packet processing for Cisco UCS Central Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high CPU utilization on the targeted device. The vulnerability is due to insufficient rate limiting protection for IPv6 ingress traffic. An attacker could exploit this vulnerability by sending the affected device a high rate of IPv6 packets. Successful exploitation could allow the attacker to cause a DoS condition due to CPU and resource constraints. Cisco Bug IDs: CSCuv34544.

A vulnerability in the Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) certificate validation during EAP authentication for the Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause the ISE application server to restart unexpectedly, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incomplete input validation of the client EAP-TLS certificate. An attacker could exploit this vulnerability by initiating EAP authentication over TLS to the ISE with a crafted EAP-TLS certificate. A successful exploit could allow the attacker to restart the ISE application server, resulting in a DoS condition on the affected system. The ISE application could continue to restart while the client attempts to establish the EAP authentication connection. If an attacker attempted to import the same EAP-TLS certificate to the ISE trust store, it could trigger a DoS condition on the affected system. This exploit vector would require the attacker to have valid administrator credentials. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance. Cisco Bug IDs: CSCve31857.

A vulnerability in the IP Version 4 (IPv4) processing code of Cisco IOS XE Software running on Cisco Catalyst 3850 and Cisco Catalyst 3650 Series Switches could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain IPv4 packets. An attacker could exploit this vulnerability by sending specific IPv4 packets to an IPv4 address on an affected device. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. If the switch does not reboot when under attack, it would require manual intervention to reload the device. This vulnerability affects Cisco Catalyst 3850 and Cisco Catalyst 3650 Series Switches that are running Cisco IOS XE Software Release 16.1.1 or later, until the first fixed release, and are configured with an IPv4 address. Cisco Bug IDs: CSCvd80714.

A vulnerability in the Server Message Block Version 2 (SMBv2) and Version 3 (SMBv3) protocol implementation for the Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause the device to run low on system memory, possibly preventing the device from forwarding traffic. It is also possible that a manual reload of the device may be required to clear the condition. The vulnerability is due to incorrect SMB header validation. An attacker could exploit this vulnerability by sending a custom SMB file transfer through the targeted device. A successful exploit could cause the device to consume an excessive amount of system memory and prevent the SNORT process from forwarding network traffic. This vulnerability can be exploited using either IPv4 or IPv6 in combination with SMBv2 or SMBv3 network traffic.

A vulnerability in the web portal of the Cisco Prime Collaboration Provisioning Tool could allow an unauthenticated, remote attacker to create a denial of service (DoS) condition for individual users. The vulnerability is due to weak login controls. An attacker could exploit this vulnerability by using a brute-force attack (Repeated Bad Login Attempts). A successful exploit could allow the attacker to restrict user access. Manual administrative intervention is required to restore access. Cisco Bug IDs: CSCvd07264.

A vulnerability in the application server of the Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to malformed SIP INVITE traffic received on the CVP during communications with the Cisco Virtualized Voice Browser (VVB). An attacker could exploit this vulnerability by sending malformed SIP INVITE traffic to the targeted appliance. An exploit could allow the attacker to impact the availability of services and data on the device, causing a DoS condition. This vulnerability affects Cisco Unified CVP running any software release prior to 11.6(1). Cisco Bug IDs: CSCve85840.

Cisco ONS 15454 controller cards with software 9.6 and earlier allow remote attackers to cause a denial of service (card reset) via a TCP FIN attack that triggers file-descriptor exhaustion and a failure to open a CAL pipe, aka Bug ID CSCug97348.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to force a NULL pointer dereference and cause a DoS condition. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69966, CSCve02435, CSCve04859, CSCve41590, CSCve41593, CSCve41601.

A vulnerability in the forwarding information base (FIB) code of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause inconsistency between the routing information base (RIB) and the FIB, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect processing of extremely long routing updates. An attacker could exploit this vulnerability by sending a large routing update. A successful exploit could allow the attacker to trigger inconsistency between the FIB and the RIB, resulting in a DoS condition. Cisco Bug IDs: CSCus84718.

A vulnerability in the crypto engine of the Cisco Integrated Services Module for VPN (ISM-VPN) running Cisco IOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient handling of VPN traffic by the affected device. An attacker could exploit this vulnerability by sending crafted VPN traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to hang or crash, resulting in a DoS condition. Cisco Bug IDs: CSCvd39267.