Cisco IOS XE 3.15S and 3.16S on cBR-8 Converged Broadband Router devices allows remote authenticated users to cause a denial of service (NULL pointer dereference and card restart) via a crafted SNMP request, aka Bug ID CSCuu68862.

The Supervisor 1.0.0.0 and 1.0.0.1 in Cisco Integrated Management Controller (IMC) before 2.0(9) allows remote authenticated users to cause a denial of service (IP interface outage) via crafted parameters in an HTTP request, aka Bug ID CSCuv38286.

The XML parser in the management interface in Cisco Adaptive Security Appliance (ASA) Software 8.4 allows remote authenticated users to cause a denial of service (device crash) via a crafted XML document, aka Bug ID CSCut14223.

Memory leak in Cisco IOS 12.2 in the Performance Routing Engine (PRE) module on uBR10000 devices allows remote authenticated users to cause a denial of service (memory consumption or PXF process crash) by sending docsIfMCmtsMib SNMP requests quickly, aka Bug ID CSCue65051.

The SNMP implementation in Cisco Adaptive Security Appliance (ASA) Software 8.4(7) and 8.6(1.2) allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests during a time of high network traffic, aka Bug ID CSCul02601.

Cisco NX-OS on Nexus 9000 devices 11.1(1c) allows remote authenticated users to cause a denial of service (device hang) via large files that are copied to a device's filesystem, aka Bug ID CSCuu77225.

The RADIUS implementation in Cisco IOS and IOS XE allows remote attackers to cause a denial of service (device reload) via crafted IPv6 Attributes in Access-Accept packets, aka Bug IDs CSCur84322 and CSCur27693.

The SSL VPN implementation in Cisco IOS 15.3(1)T2 and earlier allows remote authenticated users to cause a denial of service (interface queue wedge) via crafted DTLS packets in an SSL session, aka Bug IDs CSCuh97409 and CSCud90568.

The SIP implementation in Cisco Unified Communications Manager (CM) 8.6(.2) and earlier allows remote authenticated users to cause a denial of service (process crash) via a crafted SIP message that is not properly handled during processing of an XML document, aka Bug ID CSCtq76428.

Cisco Intrusion Prevention System (IPS) Software allows remote attackers to cause a denial of service (MainApp process outage) via malformed SNMP packets, aka Bug IDs CSCum52355 and CSCul49309.

The WebVPN CIFS implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0(.4.1) and earlier allows remote CIFS servers to cause a denial of service (device reload) via a long share list, aka Bug ID CSCuj83344.

The web framework on Cisco Wireless LAN Controller (WLC) devices does not properly validate configuration parameters, which allows remote authenticated users to cause a denial of service via a crafted HTTP request, aka Bug ID CSCuh81011.

The generic input/output control implementation in Cisco IOS does not properly manage buffers, which allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests at the same time, aka Bug ID CSCub41105.

A vulnerability in the configuration of the Pluggable Authentication Module (PAM) used in Cisco Firepower Threat Defense (FTD) Software, Cisco Firepower Management Center (FMC) Software, and Cisco FXOS Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper resource management in the context of user session management. An attacker could exploit this vulnerability by connecting to an affected system and performing many simultaneous successful Secure Shell (SSH) logins. A successful exploit could allow the attacker to exhaust system resources and cause the device to reload, resulting in a DoS condition. To exploit this vulnerability, the attacker needs valid user credentials on the system.

A vulnerability in the user management functionality of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to perform a denial of service (DoS) attack against an affected system. The vulnerability is due to insufficient validation of user-provided input. An attacker could exploit this vulnerability by logging in with a highly privileged user account and performing a sequence of specific user management operations that interfere with the underlying operating system. A successful exploit could allow the attacker to permanently degrade the functionality of the affected system.

Multiple vulnerabilities in Cisco SD-WAN vEdge Software could allow an attacker to execute arbitrary code as the root user or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application of an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

A vulnerability in service logging for Cisco Prime Service Catalog could allow an authenticated, remote attacker to deny service to the user interface. The vulnerability is due to exhaustion of disk space. An attacker could exploit this vulnerability by performing certain operations that lead to excessive logging. A successful exploit could allow the attacker to deny service to the user interface. Cisco Bug IDs: CSCvd39568.

A vulnerability in Simple Network Management Protocol (SNMP) functions of Cisco ASR 1000 Series Aggregation Services Routers running Cisco IOS XE Software Release 3.13.6S, 3.16.2S, or 3.17.1S could allow an authenticated, remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. More Information: CSCux68796. Known Affected Releases: 15.5(3)S2.1 15.6(1)S1.1. Known Fixed Releases: 15.4(3)S6.1 15.4(3)S6.2 15.5(3)S2.2 15.5(3)S3 15.6(0.22)S0.23 15.6(1)S2 16.2(0.295) 16.3(0.94) 15.5.3S3.

Unspecified vulnerability in Cisco IOS before 15.3(2)T on AS5400 devices allows remote authenticated users to cause a denial of service (spurious errors) via unknown vectors, aka Bug ID CSCub61009.

A vulnerability in the web services interface of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper resource management in the HTTP server code. An attacker could exploit this vulnerability by sending a large number of HTTP requests to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the Cisco Webex Teams client for Windows could allow an authenticated, remote attacker to cause the client to crash, resulting in a denial of service (DoS) condition. The attacker needs a valid developer account to exploit this vulnerability. The vulnerability is due to insufficient input validation when processing received adaptive cards. The attacker could exploit this vulnerability by sending an adaptive card with malicious content to an existing user of the Cisco Webex Teams client for Windows. A successful exploit could allow the attacker to cause the targeted user's client to crash continuously. This vulnerability was introduced in Cisco Webex Teams client for Windows Release 3.0.13131.

A vulnerability in the NETCONF over SSH feature of Cisco IOS XE Software could allow a low-privileged, authenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to insufficient resource management. An attacker could exploit this vulnerability by initiating a large number of NETCONF over SSH connections. A successful exploit could allow the attacker to exhaust resources, causing the device to reload and resulting in a DoS condition on an affected device.

A vulnerability in the IPSec decryption routine of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to buffer exhaustion that occurs while traffic on a configured IPsec tunnel is being processed. An attacker could exploit this vulnerability by sending traffic to an affected device that has a maximum transmission unit (MTU) of 1800 bytes or greater. A successful exploit could allow the attacker to cause the device to reload. To exploit this vulnerability, the attacker may need access to the trusted network where the affected device is in order to send specific packets to be processed by the device. All network devices between the attacker and the affected device must support an MTU of 1800 bytes or greater. This access requirement could limit the possibility of a successful exploit.

The XML parser in Cisco Adaptive Security Appliance (ASA) Software through 9.5.2 allows remote authenticated users to cause a denial of service (instability, memory consumption, or device reload) by leveraging (1) administrative access or (2) Clientless SSL VPN access to provide a crafted XML document, aka Bug ID CSCut14209.

Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote authenticated users to cause a denial of service (device reload) via crafted configuration commands in an HTTP request, aka Bug ID CSCux82523.

Cisco Email Security Appliance (ESA) 8.5.6-106 and 9.6.0-042 allows remote authenticated users to cause a denial of service (file-descriptor consumption and device reload) via crafted HTTP requests, aka Bug ID CSCuw32211.

Cisco IOS 15.5S and IOS XE allow remote authenticated users to cause a denial of service (device crash) by leveraging knowledge of the RADIUS secret and sending crafted RADIUS packets, aka Bug ID CSCur21348.

The web administration interface on Cisco Wireless LAN Controller (WLC) devices before 7.0.241, 7.1.x through 7.4.x before 7.4.122, and 7.5.x and 7.6.x before 7.6.120 allows remote authenticated users to cause a denial of service (device crash) via unspecified parameters, aka Bug IDs CSCum65159 and CSCum65252.

The server in Cisco Unity Connection allows remote authenticated users to cause a denial of service (CPU consumption) via unspecified IMAP commands, aka Bug ID CSCul49976.

A vulnerability in the Java Management Extensions (JMX) component of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to an unsecured TCP/IP port. An attacker could exploit this vulnerability by accessing the port and restarting the JMX process. A successful exploit could allow the attacker to cause a DoS condition on an affected system.

A vulnerability in the software cryptography module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker or an unauthenticated attacker in a man-in-the-middle position to cause an unexpected reload of the device that results in a denial of service (DoS) condition. The vulnerability is due to a logic error in how the software cryptography module handles specific types of decryption errors. An attacker could exploit this vulnerability by sending malicious packets over an established IPsec connection. A successful exploit could cause the device to crash, forcing it to reload. Important: Successful exploitation of this vulnerability would not cause a compromise of any encrypted data. Note: This vulnerability affects only Cisco ASA Software Release 9.16.1 and Cisco FTD Software Release 7.0.0.

A vulnerability in the REST API of Cisco Managed Services Accelerator (MSX) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the way that the affected software logs certain API requests. An attacker could exploit this vulnerability by sending a flood of crafted API requests to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

A vulnerability in the XML parser code of Cisco Firepower Device Manager On-Box software could allow an authenticated, remote attacker to cause an affected system to become unstable or reload. The vulnerability is due to insufficient hardening of the XML parser configuration. An attacker could exploit this vulnerability in multiple ways using a malicious file: An attacker with administrative privileges could upload a malicious XML file on the system and cause the XML code to parse the malicious file. An attacker with Clientless Secure Sockets Layer (SSL) VPN access could exploit this vulnerability by sending a crafted XML file. A successful exploit would allow the attacker to crash the XML parser process, which could cause system instability, memory exhaustion, and in some cases lead to a reload of the affected system.

A vulnerability in the role-based resource checking functionality of Cisco Unified Computing System (UCS) Director could allow an authenticated, remote attacker to view unauthorized information for any virtual machine in a UCS domain. More Information: CSCvc32434. Known Affected Releases: 5.5(0.1) 6.0(0.0).

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to make unauthorized changes to the system configuration. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow a user with read-only privileges to change critical system configurations using administrator privileges.

A vulnerability in the web services interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute certain unauthorized configuration commands on a Firepower Threat Defense (FTD) device that is managed by the FMC Software. This vulnerability is due to insufficient authorization of configuration commands that are sent through the web service interface. An attacker could exploit this vulnerability by authenticating to the FMC web services interface and sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to execute certain configuration commands on the targeted FTD device. To successfully exploit this vulnerability, an attacker would need valid credentials on the FMC Software.

Cisco Carrier Routing System (CRS) 3.9, 4.0, and 4.1 allows remote attackers to bypass ACL entries via fragmented packets, aka Bug ID CSCtj10975.

A vulnerability in Cisco Expressway Edge (Expressway-E) could allow an authenticated, remote attacker to masquerade as another user on an affected system. This vulnerability is due to inadequate authorization checks for Mobile and Remote Access (MRA) users. An attacker could exploit this vulnerability by running a series of crafted commands. A successful exploit could allow the attacker to intercept calls that are destined for a particular phone number or to make phone calls and have that phone number appear on the caller ID. To successfully exploit this vulnerability, the attacker must be an MRA user on an affected system.

A vulnerability in the JSON-RPC API feature in Cisco Crosswork Network Services Orchestrator (NSO) and ConfD that is used by the web-based management interfaces of Cisco Optical Site Manager and Cisco RV340 Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to modify the configuration of an affected application or device.  This vulnerability is due to improper authorization checks on the API. An attacker with privileges sufficient to access the affected application or device could exploit this vulnerability by sending malicious requests to the JSON-RPC API. A successful exploit could allow the attacker to make unauthorized modifications to the configuration of the affected application or device, including creating new user accounts or elevating their own privileges on an affected system.

A vulnerability in the web-based management interface of Cisco ISE could allow an authenticated, remote attacker to bypass the authorization mechanisms for specific administrative functions. This vulnerability is due to a lack of server-side validation of Administrator permissions. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected system. A successful exploit could allow the attacker to conduct administrative functions beyond their intended access level. To exploit this vulnerability, an attacker would need Read-Only Administrator credentials.

Multiple vulnerabilities in the authorization process of Cisco ASR 5000 Series Software (StarOS) could allow an authenticated, remote attacker to bypass authorization and execute a subset of CLI commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to view, modify, and delete data without proper authorization. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to view, modify, and delete data without proper authorization. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the restricted shell of the Cisco Identity Services Engine (ISE) that is accessible via SSH could allow an authenticated, local attacker to run arbitrary CLI commands with elevated privileges. The vulnerability is due to incomplete input validation of the user input for CLI commands issued at the restricted shell. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. An attacker would need valid user credentials to the device to exploit this vulnerability. The vulnerability affects the following Cisco Identity Services Engine (ISE) products running Release 1.4, 2.0, 2.0.1, 2.1.0: ISE, ISE Express, ISE Virtual Appliance. Cisco Bug IDs: CSCve74916.

A vulnerability in the web-based management interface of Cisco RV110W, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to disconnect clients that are connected to the guest network on an affected router. The vulnerability is due to improper authorization of an HTTP request. An attacker could exploit this vulnerability by accessing the URL for device disconnection and providing the connected device information. A successful exploit could allow the attacker to deny service to specific clients that are connected to the guest network.

A vulnerability in the web management interface of Cisco Small Business 220 Series Smart Switches could allow an unauthenticated, remote attacker to upload arbitrary files. The vulnerability is due to incomplete authorization checks in the web management interface. An attacker could exploit this vulnerability by sending a malicious request to certain parts of the web management interface. Depending on the configuration of the affected switch, the malicious request must be sent via HTTP or HTTPS. A successful exploit could allow the attacker to modify the configuration of an affected device or to inject a reverse shell. This vulnerability affects Cisco Small Business 220 Series Smart Switches running firmware versions prior to 1.1.4.4 with the web management interface enabled. The web management interface is enabled via both HTTP and HTTPS by default.

A vulnerability in the web-based management interface of Cisco RV110W, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to access the syslog file on an affected device. The vulnerability is due to improper authorization of an HTTP request. An attacker could exploit this vulnerability by accessing the URL for the syslog file. A successful exploit could allow the attacker to access the information contained in the file.

A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to elevate privileges and execute administrative functions on an affected device. The vulnerability is due to insufficient authorization validation. An attacker could exploit this vulnerability by logging in to an affected device as a low-privileged user and then sending specific HTTPS requests to execute administrative functions using the information retrieved during initial login.