Aterm WF1200CR and Aterm WG1200CR (Aterm WF1200CR firmware Ver1.1.1 and earlier, Aterm WG1200CR firmware Ver1.0.1 and earlier) allows authenticated attackers to execute arbitrary OS commands via unspecified vectors.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via HTTP request and response.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via import.cgi encKey parameter.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via tools_firmware.cgi date parameter, time parameter, and offset parameter.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via HTTP request and response.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via sysCmd parameter.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via targetAPSsid parameter.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via FactoryPassword parameter or bootmode parameter of a certain URL.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via filename parameter.

Hitachi Virtual File Platform Versions prior to 5.5.3-09 and Versions prior to 6.4.3-09, and NEC Storage M Series NAS Gateway Nh4a/Nh8a versions prior to FOS 5.5.3-08(NEC2.5.4a) and Nh4b/Nh8b, Nh4c/Nh8c versions prior to FOS 6.4.3-08(NEC3.4.2) allow remote authenticated attackers to execute arbitrary OS commands with root privileges via unspecified vectors.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via export.cgi encKey parameter.

Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary OS commands via FactoryPassword parameter of a certain URL, different URL from CVE-2018-0634.

Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary OS commands via targetAPSsid parameter.

NEC Aterm devices (Aterm WF1200CR firmware Ver1.3.2 and earlier, Aterm WG1200CR firmware Ver1.3.3 and earlier, and Aterm WG2600HS firmware Ver1.5.1 and earlier) allow authenticated attackers to execute arbitrary OS commands by sending a specially crafted request to a specific URL.

Aterm WG1200HP firmware Ver1.0.31 and earlier allows attacker with administrator rights to execute arbitrary OS commands via sysCmd in formWsc parameter.

Buffer overflow in Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary code via netWizard.cgi date parameter, time parameter, and offset parameter.

Buffer overflow in Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary code via submit-url parameter.

Buffer overflow in Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary code via tools_system.cgi date parameter, time parameter, and offset parameter.

Buffer overflow in Aterm W300P Ver1.0.13 and earlier allows attacker with administrator rights to execute arbitrary code via HTTP request and response.

Improper validation of integrity check value vulnerability in NEC Aterm WF1200CR firmware Ver1.3.2 and earlier, Aterm WG1200CR firmware Ver1.3.3 and earlier, and Aterm WG2600HS firmware Ver1.5.1 and earlier allows an attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to a specific URL.

Command execution via shell metachars in INN daemon (innd) 1.5 using "newgroup" and "rmgroup" control messages, and others.

Aterm WF1200CR and Aterm WG1200CR (Aterm WF1200CR firmware Ver1.1.1 and earlier, Aterm WG1200CR firmware Ver1.0.1 and earlier) allows an attacker on the same network segment to execute arbitrary OS commands via SOAP interface of UPnP.

An OS Command injection vulnerability in NEC Platforms DT900 and DT900S Series all versions allows an attacker to execute any command on the device.

Aterm WG2600HS firmware Ver1.5.1 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

NEC Corporation Aterm WX1500HP Ver.1.4.2 and earlier and WX3600HP Ver.1.5.3 and earlier allows a attacker to execute arbitrary OS commands via the network.

Improper Neutralization of Special Elements used in an OS Command vulnerability in NEC Corporation Aterm WG2600HP2, WG2600HP, WG2200HP, WG1800HP2, WG1800HP, WG1400HP, WG600HP, WG300HP, WF300HP, WR9500N, WR9300N, WR8750N, WR8700N, WR8600N, WR8370N, WR8175N and WR8170N all versions allows a attacker to execute an arbitrary OS command with the root privilege, after obtaining a high privilege exploiting CVE-2023-3330 and CVE-2023-3331 vulnerabilities.

Aterm SA3500G firmware versions prior to Ver. 3.5.9 allows an attacker with an administrative privilege to send a specially crafted request to a specific URL, which may result in an arbitrary command execution.

Aterm series (Aterm WF1200C firmware Ver1.2.1 and earlier, Aterm WG1200CR firmware Ver1.2.1 and earlier, Aterm WG2600HS firmware Ver1.3.2 and earlier) allows an authenticated attacker on the same network segment to execute arbitrary OS commands with root privileges via management screen.

Aterm WG2600HS firmware Ver1.3.2 and earlier allows an authenticated attacker on the same network segment to execute arbitrary OS commands with root privileges via unspecified vectors.

UUNIVERGE WA 1020 Ver8.2.11 and prior, UNIVERGE WA 1510 Ver8.2.11 and prior, UNIVERGE WA 1511 Ver8.2.11 and prior, UNIVERGE WA 1512 Ver8.2.11 and prior, UNIVERGE WA 2020 Ver8.2.11 and prior, UNIVERGE WA 2021 Ver8.2.11 and prior, UNIVERGE WA 2610-AP Ver8.2.11 and prior, UNIVERGE WA 2611-AP Ver8.2.11 and prior, UNIVERGE WA 2611E-AP Ver8.2.11 and prior, UNIVERGE WA WA2612-AP Ver8.2.11 and prior allows a remote attacker to execute arbitrary OS commands.

FFRI AMC versions 3.4.0 to 3.5.3 and some OEM products that implement/bundle FFRI AMC versions 3.4.0 to 3.5.3 allow a remote unauthenticated attacker to execute arbitrary OS commands when certain conditions are met in an environment where the notification program setting is enabled and the executable file path is set to a batch file (.bat) or command file (.cmd) extension.

UNIVERGE SV9500 series from V1 to V7and SV8500 series from S6 to S8 allows an attacker to execute arbitrary OS commands or cause a denial-of-service (DoS) condition by sending a specially crafted request to a specific URL.

Aterm SA3500G firmware versions prior to Ver. 3.5.9 allows an attacker on the adjacent network to send a specially crafted request to a specific URL, which may result in an arbitrary command execution.

Improper Neutralization of Special Elements used in an OS Command vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary OS command with the root privilege via the internet.

Aterm series (Aterm WF1200C firmware Ver1.2.1 and earlier, Aterm WG1200CR firmware Ver1.2.1 and earlier, Aterm WG2600HS firmware Ver1.3.2 and earlier) allows an attacker on the same network segment to execute arbitrary OS commands with root privileges via UPnP function.

IBM FileNet Content Manager 5.5.4, 5.5.6, and 5.5.7 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 212346.

An issue was discovered in PRTG Network Monitor before 18.2.39. An attacker who has access to the PRTG System Administrator web console with administrative privileges can exploit an OS command injection vulnerability (both on the server and on devices) by sending malformed parameters in sensor or notification management scenarios.

Fortinet FortiWan (formerly AscernLink) before 4.2.5 allows remote authenticated users with access to the nslookup functionality to execute arbitrary commands with root privileges via the graph parameter to diagnosis_control.php.

In app/Controller/ServersController.php in MISP 2.4.87, a server setting permitted the override of a path variable on certain Red Hed Enterprise Linux and CentOS systems (where rh_shell_fix was enabled), and consequently allowed site admins to inject arbitrary OS commands. The impact is limited by the setting being only accessible to the site administrator.

An OS command injection vulnerability in FortiWeb's management interface 6.3.7 and below, 6.2.3 and below, 6.1.x, 6.0.x, 5.9.x may allow a remote authenticated attacker to execute arbitrary commands on the system via the SAML server configuration page.

Remote command execution (RCE) vulnerability in Nagios XI 5.2.x through 5.4.x before 5.4.13 allows an attacker to execute arbitrary commands on the target system, aka OS command injection.

In some Lenovo ThinkServer-branded servers, a command injection vulnerability exists in the BMC firmware download command. This allows a privileged user to download and execute arbitrary code inside the BMC. This can only be exploited by authorized privileged users.

The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote authenticated users to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31659.

A command injection vulnerability is present in Aruba Instant that permits an authenticated administrative user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. Workaround: None. Resolution: Fixed in Aruba Instant 4.2.4.12, 6.5.4.11, 8.3.0.6, and 8.4.0.0

The setSystemTime function in Foscam Cameras C1 Lite V3, and C1 V3 with firmware 2.82.2.33 and earlier, FI9800P V3, FI9803P V4, FI9851P V3, and FI9853EP V2 2.84.2.33 and earlier, FI9816P V3, FI9821EP V2, FI9821P V3, FI9826P V3, and FI9831P V3 2.81.2.33 and earlier, C1, C1 V2, C1 Lite, and C1 Lite V2 2.52.2.47 and earlier, FI9800P, FI9800P V2, FI9803P V2, FI9803P V3, and FI9851P V2 2.54.2.47 and earlier, FI9815P, FI9815P V2, FI9816P, and FI9816P V2, 2.51.2.47 and earlier, R2 and R4 2.71.1.59 and earlier, C2 and FI9961EP 2.72.1.59 and earlier, FI9900EP, FI9900P, and FI9901EP 2.74.1.59 and earlier, FI9928P 2.74.1.58 and earlier, FI9803EP and FI9853EP 2.22.2.31 and earlier, FI9803P and FI9851P 2.24.2.31 and earlier, FI9821P V2, FI9826P V2, FI9831P V2, and FI9821EP 2.21.2.31 and earlier, FI9821W V2, FI9831W, FI9826W, FI9821P, FI9831P, and FI9826P 2.11.1.120 and earlier, FI9818W V2 2.13.2.120 and earlier, FI9805W, FI9804W, FI9804P, FI9805E, and FI9805P 2.14.1.120 and earlier, FI9828P, and FI9828W 2.13.1.120 and earlier, and FI9828P V2 2.11.1.133 and earlier allows remote authenticated users to execute arbitrary commands via a ';' in the ntpServer argument. NOTE: this issue exists because of an incomplete fix for CVE-2017-2849.

ABAP Tests Modules (SAP Basis, versions 7.0, 7.1, 7.3, 7.31, 7.4, 7.5) of SAP NetWeaver Process Integration enables an attacker the execution of OS commands with privileged rights. An attacker could thereby impact the integrity and availability of the system.

Accellion Secure File Transfer Appliance before 8_0_105 allows remote authenticated administrators to bypass the restricted shell and execute arbitrary commands via shell metacharacters to the ping command, as demonstrated by modifying the cli program.

pfSense before 2.3 allows remote authenticated users to execute arbitrary OS commands via a '|' character in the status_rrd_graph_img.php graph parameter, related to _rrd_graph_img.php.

operation/agentes/networkmap.php in Pandora FMS before 3.1.1 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the layout parameter in an operation/agentes/networkmap action to index.php.

The Device Manager GUI in Cisco Application Control Engine (ACE) 4710 A5 before A5(3.1) allows remote authenticated users to bypass intended RBAC restrictions and execute arbitrary CLI commands with admin privileges via an unspecified parameter in a POST request, aka Bug ID CSCul84801.