The Belkin Wemo Enabled Crock-Pot allows command injection in the Wemo UPnP API via the SmartDevURL argument to the SetSmartDevInfo action. A simple POST request to /upnp/control/basicevent1 can allow an attacker to execute commands without authentication.

A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to twonky_command.cgi.

In Belkin N300 Firmware 1.00.08, the script located at /setting_hidden.asp, which is accessible before and after configuring the device, exhibits multiple remote command injection vulnerabilities. The following parameters in the [form name] form; [list vulnerable parameters], are not properly sanitized after being submitted to the web interface in a POST request. With specially crafted parameters, it is possible to inject a an OS command which will be executed with root privileges, as the web interface, and all processes on the device, run as root.

cgi-bin/setup_dns.exe on the Belkin F5D7230-4 router with firmware 9.01.10 does not require authentication, which allows remote attackers to perform administrative actions, as demonstrated by changing a DNS server via the dns1_1, dns1_2, dns1_3, and dns1_4 parameters. NOTE: it was later reported that F5D7632-4V6 with firmware 6.01.08 is also affected.

A vulnerability was found in Belkin F9K1009 and F9K1010 2.00.04/2.00.09 and classified as critical. Affected by this issue is some unknown functionality of the component Web Interface. The manipulation leads to hard-coded credentials. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Stack-based Buffer Overflow vulnerability in libUPnPHndlr.so in Belkin Wemo Insight Smart Plug allows remote attackers to bypass local security protection via a crafted HTTP post packet.

The web interface to the Belkin Wireless G router and ADSL2 modem F5D7632-4V6 with firmware 6.01.08 allows remote attackers to bypass authentication and gain administrator privileges via a direct request to (1) statusprocess.exe, (2) system_all.exe, or (3) restore.exe in cgi-bin/. NOTE: the setup_dns.exe vector is already covered by CVE-2008-1244.

Buffer overflow in login.cgi in MiniHttpd in Belkin N750 Router with firmware before F9K1103_WW_1.10.17m allows remote attackers to execute arbitrary code via a long string in the jump parameter.

The Belkin WeMo Home Automation firmware before 3949 has a hardcoded GPG key, which makes it easier for remote attackers to spoof firmware updates and execute arbitrary code via crafted signed data.

A remote unauthenticated user can overflow a stack buffer in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to proxy.cgi.

The control panel on the Belkin F5D7230-4 router with firmware 9.01.10 maintains authentication state by IP address, which allows remote attackers to bypass authentication by establishing a session from a source IP address of a previously authenticated user, a different vulnerability than CVE-2005-3802.

An Authentication Bypass vulnerability in Belkin N300 (F7D7301v1) router allows remote attackers to bypass authentication using "Javascript debugging."

The administration web interface on Belkin Linksys WRT160NL 1.0.04.002_US_20130619 devices allows remote authenticated attackers to execute system commands with root privileges via shell metacharacters in the ui_language POST parameter to the apply.cgi form endpoint. This occurs in do_upgrade_post in mini_httpd. NOTE: This vulnerability only affects products that are no longer supported by the maintaine

A vulnerability was found in Belkin F9K1122 1.00.33 and classified as critical. Affected by this issue is the function formBSSetSitesurvey of the file /goform/formBSSetSitesurvey of the component webs. The manipulation of the argument wan_ipaddr/wan_netmask/wan_gateway/wl_ssid is directly passed by the attacker/so we can control the wan_ipaddr/wan_netmask/wan_gateway/wl_ssid leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Belkin F9K1122 1.00.33 and classified as critical. Affected by this vulnerability is the function formSetWanStatic of the file /goform/formSetWanStatic of the component webs. The manipulation of the argument m_wan_ipaddr/m_wan_netmask/m_wan_gateway/m_wan_staticdns1/m_wan_staticdns2 is directly passed by the attacker/so we can control the m_wan_ipaddr/m_wan_netmask/m_wan_gateway/m_wan_staticdns1/m_wan_staticdns2 leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Belkin F9K1122 1.00.33. It has been classified as critical. This affects the function mp of the file /goform/mp of the component webs. The manipulation of the argument command leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of NetGain Systems Enterprise Manager v7.2.699 build 1001. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the content parameter provided to the script_test.jsp endpoint. A crafted content request parameter can trigger execution of a system call composed from a user-supplied string. An attacker can leverage this vulnerability to execute code under the context of the web service. Was ZDI-CAN-5080.

Telesquare SDT-CW3B1 1.1.0 is affected by an OS command injection vulnerability that allows a remote attacker to execute OS commands without any authentication.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows Network Processor (NP) Linux users to obtain root access to the Application Processor (AP) Linux system via shell metacharacters in commands.

Shell metacharacter injection vulnerability in /usr/www/include/ajax/GetTest.php in TerraMaster TOS before 3.0.34 leads to remote code execution as root.

Tenable Appliance 3.5 - 4.4.0, and possibly prior versions, contains a flaw in the simpleupload.py script in the Web UI. Through the manipulation of the tns_appliance_session_user parameter, a remote attacker can inject arbitrary commands.

totolink a3100r V5.9c.4577 is vulnerable to os command injection. The backend of a page is executing the "ping" command, and the input field does not adequately filter special symbols. This can lead to command injection attacks.

The Thecus NAS server N8800 with firmware 5.03.01 allows remote attackers to execute arbitrary commands via a get_userid action with shell metacharacters in the username parameter.

QNAP NAS application Proxy Server through version 1.2.0 allows remote attackers to run arbitrary OS commands against the system with root privileges.

Directory traversal vulnerability in processImageSave.jsp in DCNM-SAN Server in Cisco Prime Data Center Network Manager (DCNM) before 6.2(1) allows remote attackers to write arbitrary files via the chartid parameter, aka Bug IDs CSCue77035 and CSCue77036. NOTE: this can be leveraged to execute arbitrary commands by using the JBoss autodeploy functionality.

The management interface for the Teltonika RUT9XX routers (aka LuCI) with firmware 00.03.265 and earlier allows remote attackers to execute arbitrary commands with root privileges via shell metacharacters in the username parameter in a login request.

NPM package gitlabhook version 0.0.17 is vulnerable to a Command Injection vulnerability. Arbitrary commands can be injected through the repository name.

QNAP QTS before 4.2.4 Build 20170313 allows attackers to gain administrator privileges and obtain sensitive information via unspecified vectors.

In Sophos Web Appliance (SWA) before 4.3.1.2, a section of the machine's interface responsible for generating reports was vulnerable to remote command injection via functions, aka NSWA-1304.

A command injection vulnerability exists in the mudler/localai version 2.14.0. The vulnerability arises from the application's handling of the backend parameter in the configuration file, which is used in the name of the initialized process. An attacker can exploit this vulnerability by manipulating the path of the vulnerable binary file specified in the backend parameter, allowing the execution of arbitrary code on the system. This issue is due to improper neutralization of special elements used in an OS command, leading to potential full control over the affected system.

ping.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping_IPAddr field of an HTTP POST request.

QNAP QTS before 4.2.4 Build 20170313 allows attackers to gain administrator privileges and execute arbitrary commands via unspecified vectors.

IBM API Connect 5.0.0.0 and 5.0.8.6 Developer Portal is vulnerable to command injection. An attacker with a specially crafted request can run arbitrary code on the server and gain complete access to the system. IBM X-Force ID: 159123.

An Improper Neutralization of Special Elements (in an OS command) issue was discovered in Geutebruck IP Camera G-Cam/EFD-2250 Version 1.11.0.12. An improper neutralization of special elements vulnerability has been identified. If special elements are not properly neutralized, an attacker can call multiple parameters that can allow access to the root level operating system which could allow remote code execution.

Command Injection vulnerability in the web interface in McAfee Advanced Threat Defense (ATD) 3.10, 3.8, 3.6, 3.4 allows remote unauthenticated users / remote attackers to execute a command of their choice via a crafted HTTP request parameter.

OS Command Injection vulnerability in McAfee ePolicy Orchestrator (ePO) 5.9.0, 5.3.2, 5.3.1, 5.1.3, 5.1.2, 5.1.1, and 5.1.0 allows attackers to run arbitrary OS commands with limited privileges via not sanitizing the user input data before exporting it into a CSV format output.

The get_referers function in /opt/ws/bin/sblistpack in Sophos Web Appliance before 3.7.9.1 and 3.8 before 3.8.1.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the domain parameter to end-user/index.php.

The Lenovo Service Framework Android application executes some system commands without proper sanitization of external input. In certain cases, this could lead to command injection which, in turn, could lead to remote code execution.

In Visual Tools DVR VX16 4.2.28.0, an unauthenticated attacker can achieve remote command execution via shell metacharacters in the cgi-bin/slogin/login.py User-Agent HTTP header.

An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. Multiple functions in the bpserverd daemon were vulnerable to arbitrary remote code execution as root. The vulnerability was caused by untrusted input (received by the server) being passed to system calls.

smalruby-editor v0.4.0 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

TOTOLINK EX1200T V4.1.2cu.5215 is affected by a command injection vulnerability that can remotely execute arbitrary code.

The ZyXEL P660HN-T1A v1 TCLinux Fw $7.3.15.0 v001 / 3.40(ULM.0)b31 router distributed by TrueOnline has a command injection vulnerability in the Remote System Log forwarding function, which is accessible by an unauthenticated user. The vulnerability is in the ViewLog.asp page and can be exploited through the remote_host parameter.

cgi-bin/drknow.cgi in Innotube ITGuard-Manager 0.0.0.1 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the username field, as demonstrated by a username beginning with "admin|" to use the '|' metacharacter.

OS Command Injection vulnerability in debug_fcgi of D-Link DWR-932C E1 firmware allows a remote attacker to perform command injection via a crafted HTTP request.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in the function setDiagnosisCfg of the file lib/cste_modules/system.so to control the ipDoamin.

Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetWizardConfig.php in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicoius users can use this vulnerability to use "\ " or backticks in the shell metacharacters in the ssid0 or ssid1 parameters to cause arbitrary command execution. Since CVE-2019-17510 vulnerability has not been patched and improved www/hnap1/control/setwizardconfig.php, can also use line breaks and backquotes to bypass.

core/getLog.php on the Siemens Enterprise OpenScape Branch appliance and OpenScape Session Border Controller (SBC) before 2 R0.32.0, and 7 before 7 R1.7.0, allows remote attackers to execute arbitrary commands via unspecified vectors.