Command execution via shell metachars in INN daemon (innd) 1.5 using "newgroup" and "rmgroup" control messages, and others.

Use of Hard-coded Password in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary OS command via the internet.

Hidden Functionality vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary OS command with the root privilege via the internet

Active Debug Code in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary OS command via the internet.

Improper authentication vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary command with the root privilege via the internet.

An OS Command injection vulnerability in NEC Platforms DT900 and DT900S Series all versions allows an attacker to execute any command on the device.

Improper input validation vulnerability in the Transaction Server CLUSTERPRO X 4.3 for Windows and earlier, EXPRESSCLUSTER X 4.3 for Windows and earlier, CLUSTERPRO X 4.3 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 4.3 SingleServerSafe for Windows and earlier allows attacker to read files upload via network..

Improper access control vulnerability in NEC Aterm WG2600HS firmware Ver1.5.1 and earlier, and Aterm WX3000HP firmware Ver1.1.2 and earlier allows a device connected to the LAN side to be accessed from the WAN side due to the defect in the IPv6 firewall function.

Aterm WG2600HS firmware Ver1.5.1 and earlier allows an attacker to execute arbitrary OS commands via unspecified vectors.

Buffer overflow vulnerability in the Transaction Server CLUSTERPRO X 4.3 for Windows and earlier, EXPRESSCLUSTER X 4.3 for Windows and earlier, CLUSTERPRO X 4.3 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 4.3 SingleServerSafe for Windows and earlier allows attacker to remote code execution via a network.

Buffer overflow vulnerability in the Disk Agent CLUSTERPRO X 4.3 for Windows and earlier, EXPRESSCLUSTER X 4.3 for Windows and earlier, CLUSTERPRO X 4.3 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 4.3 SingleServerSafe for Windows and earlier allows attacker to remote code execution via a network.

Buffer overflow vulnerability in the Transaction Server CLUSTERPRO X 4.3 for Windows and earlier, EXPRESSCLUSTER X 4.3 for Windows and earlier, CLUSTERPRO X 4.3 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 4.3 SingleServerSafe for Windows and earlier allows attacker to remote code execution via a network.

Buffer overflow vulnerability in the Disk Agent CLUSTERPRO X 4.3 for Windows and earlier, EXPRESSCLUSTER X 4.3 for Windows and earlier, CLUSTERPRO X 4.3 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 4.3 SingleServerSafe for Windows and earlier allows attacker to remote code execution via a network.

Buffer overflow vulnerability in CLUSTERPRO X 5.0 for Windows and earlier, EXPRESSCLUSTER X 5.0 for Windows and earlier, CLUSTERPRO X 5.0 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 5.0 SingleServerSafe for Windows and earlier allows a remote unauthenticated attacker to overwrite existing files on the file system and to potentially execute arbitrary code.

Uncontrolled Search Path Element in CLUSTERPRO X 5.0 for Windows and earlier, EXPRESSCLUSTER X 5.0 for Windows and earlier, CLUSTERPRO X 5.0 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 5.0 SingleServerSafe for Windows and earlier allows a remote unauthenticated attacker to overwrite existing files on the file system and to potentially execute arbitrary code.

Path traversal vulnerability in CLUSTERPRO X 5.0 for Windows and earlier, EXPRESSCLUSTER X 5.0 for Windows and earlier, CLUSTERPRO X 5.0 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 5.0 SingleServerSafe for Windows and earlier allows a remote unauthenticated attacker to overwrite existing files on the file system and to potentially execute arbitrary code.

Weak File and Folder Permissions vulnerability in CLUSTERPRO X 5.0 for Windows and earlier, EXPRESSCLUSTER X 5.0 for Windows and earlier, CLUSTERPRO X 5.0 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 5.0 SingleServerSafe for Windows and earlier allows a remote unauthenticated attacker to overwrite existing files on the file system and to potentially execute arbitrary code.

Multiple NEC products (Express5800/T110j, Express5800/T110j-S, Express5800/T110j (2nd-Gen), Express5800/T110j-S (2nd-Gen), iStorage NS100Ti, and Express5800/GT110j) where Baseboard Management Controller (BMC) firmware Rev1.09 and earlier is applied allows remote attackers to bypass authentication and then obtain/modify BMC setting information, obtain monitoring information, or reboot/shut down the vulnerable product via unspecified vectors.

Certain builds of NEC SV9100 software could allow an unauthenticated, remote attacker to log into a device running an affected release with a hardcoded username and password, aka a Static Credential Vulnerability. The vulnerability is due to an undocumented user account with manufacturer privilege level. An attacker could exploit this vulnerability by using this account to remotely log into an affected device. A successful exploit could allow the attacker to log into the device with manufacturer level access. This vulnerability affects SV9100 PBXes that are running software release 6.0 or higher. This vulnerability does not affect SV9100 software releases prior to 6.0.

This vulnerability allows remote attackers to disclose sensitive information on affected installations of NEC ESMPRO Manager 6.42. Authentication is not required to exploit this vulnerability. The specific flaw exists within the GetEuaLogDownloadAction class. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to disclose information in the context of SYSTEM. Was ZDI-CAN-9607.

UUNIVERGE WA 1020 Ver8.2.11 and prior, UNIVERGE WA 1510 Ver8.2.11 and prior, UNIVERGE WA 1511 Ver8.2.11 and prior, UNIVERGE WA 1512 Ver8.2.11 and prior, UNIVERGE WA 2020 Ver8.2.11 and prior, UNIVERGE WA 2021 Ver8.2.11 and prior, UNIVERGE WA 2610-AP Ver8.2.11 and prior, UNIVERGE WA 2611-AP Ver8.2.11 and prior, UNIVERGE WA 2611E-AP Ver8.2.11 and prior, UNIVERGE WA WA2612-AP Ver8.2.11 and prior allows a remote attacker to execute arbitrary OS commands.

This vulnerability allows remote attackers to disclose sensitive information on affected installations of NEC ExpressCluster 4.1. Authentication is not required to exploit this vulnerability. The specific flaw exists within the clpwebmc executable. Due to the improper restriction of XML External Entity (XXE) references, a specially-crafted document specifying a URI causes the XML parser to access the URI and embed the contents back into the XML document for further processing. An attacker can leverage this vulnerability to disclose information in the context of SYSTEM. Was ZDI-CAN-10801.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NEC ESMPRO Manager 6.42. Authentication is not required to exploit this vulnerability. The specific flaw exists within the RMI service. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10007.

UNIVERGE DT 820 V3.2.7.0 and prior, UNIVERGE DT 830 V5.2.7.0 and prior, UNIVERGE DT 930 V2.4.0.0 and prior, IP Phone Manager V8.9.1 and prior, Data Maintenance Tool for DT900 Series V5.3.0.0 and prior, Data Maintenance Tool for DT800 Series V4.2.0.0 and prior allows a remote attacker who can access to the internal network, the configuration information may be obtained.

Aspire-derived NEC PBXes, including the SV8100, SV9100, SL1100 and SL2100 with software releases 7.0 or higher contain the possibility if incorrectly configured to allow a blank username and password combination to be entered as a valid, successfully authenticating account.

On Aspire-derived NEC PBXes, including all versions of SV8100 devices, a set of documented, static login credentials may be used to access the DIM interface.

Aspire-derived NEC PBXes operating InMail software, including all versions of SV8100, SV9100, SL1100 and SL2100 devices allow unauthenticated read-only access to voicemails, greetings, and voice response system content through a system's WebPro administration interface.

Buffer overflow vulnerability in the compatible API with previous versions CLUSTERPRO X 4.3 for Windows and earlier, EXPRESSCLUSTER X 4.3 for Windows and earlier, CLUSTERPRO X 4.3 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 4.3 SingleServerSafe for Windows and earlier allows attacker to remote code execution via a network.

Calsos CSDJ (CSDJ-B 01.08.00 and earlier, CSDJ-H 01.08.00 and earlier, CSDJ-D 01.08.00 and earlier, and CSDJ-A 03.08.00 and earlier) allows remote attackers to bypass access restriction and to obtain unauthorized historical data without access privileges via unspecified vectors.

NEC Univerge Sv9100 WebPro 6.00.00 devices have Cleartext Password Storage in the Web UI.

UNIVERGE SV9500 series from V1 to V7and SV8500 series from S6 to S8 allows an attacker to execute arbitrary OS commands or cause a denial-of-service (DoS) condition by sending a specially crafted request to a specific URL.

Incorrect implementation of authentication algorithm issue in UNIVERGE SV9500 series from V1 to V7and SV8500 series from S6 to S8 allows an attacker to access the remote system maintenance feature and obtain the information by sending a specially crafted request to a specific URL.

Improper Neutralization of Special Elements used in an OS Command vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary OS command with the root privilege via the internet.

Stack-based Buffer Overflow vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to execute an arbitrary command via the internet.

Aterm WF1200CR and Aterm WG1200CR (Aterm WF1200CR firmware Ver1.1.1 and earlier, Aterm WG1200CR firmware Ver1.0.1 and earlier) allow an attacker on the same network segment to obtain information registered on the device via unspecified vectors.

The billing system for Parallels Plesk Panel 10.3.1_build1013110726.09 has web pages containing e-mail addresses that are not intended for correspondence about the local application deployment, which allows remote attackers to obtain potentially sensitive information by reading a page, as demonstrated by js/ajax/core/ajax.inc.js and certain other files.

Wiki Server in Apple OS X Server before 5.1 allows remote attackers to obtain sensitive information from Wiki pages via unspecified vectors.

Dolphin 7.0.4 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by xmlrpc/BxDolXMLRPCProfileView.php and certain other files.

The User Management Engine (UME) in SAP NetWeaver 7.4 allows attackers to decrypt unspecified data via unknown vectors, aka SAP Security Note 2191290.

Arctic Fox CMS 0.9.4 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by acp/includes/edit.inc.php and certain other files.

TCExam 11.1.015 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by public/code/tce_page_footer.php and certain other files.

xymond/xymond.c in xymond in Xymon 4.1.x, 4.2.x, and 4.3.x before 4.3.25 allow remote attackers to read arbitrary files in the configuration directory via a "config" command.

PrestaShop 1.4.0.6 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by product-sort.php and certain other files.

news.php in SimpNews 2.47.3 and earlier allows remote attackers to obtain sensitive information via an invalid lang parameter, which reveals the installation path in an error message.

Moodle 2.0.1 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by webservice/xmlrpc/locallib.php and certain other files.

Bugzilla 2.17.1 through 3.2.7, 3.3.1 through 3.4.7, 3.5.1 through 3.6.1, and 3.7 through 3.7.2 generates different error messages depending on whether a product exists, which makes it easier for remote attackers to guess product names via unspecified use of the (1) Reports or (2) Duplicates page.

The XSS auditor in WebKit, as used in Apple iOS before 9.3 and Safari before 9.1, does not properly handle redirects in block mode, which allows remote attackers to obtain sensitive information via a crafted URL.

PhpSecInfo 0.2.1 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by Test/Test_Suhosin.php and certain other files.

kPlaylist 1.8.502 allows remote attackers to obtain sensitive information via a direct request to a .php file, which reveals the installation path in an error message, as demonstrated by getid3/getid3/write.id3v1.php and certain other files.