Dell EMC Unity Operating Environment (OE) versions prior to 4.3.0.1522077968 are affected by multiple OS command injection vulnerabilities. A remote application admin user could potentially exploit the vulnerabilities to execute arbitrary OS commands as system root on the system where Dell EMC Unity is installed.

Tenda Technology Co.,Ltd HG6 3.3.0-210926 was discovered to contain a command injection vulnerability via the pingAddr and traceAddr parameters. This vulnerability is exploited via a crafted POST request.

Ubiquiti Networks EdgeSwitch version 1.7.3 and prior suffer from an improperly neutralized element in an OS command due to lack of protection on the admin CLI, leading to code execution and privilege escalation greater than administrators themselves are allowed. An attacker with access to an admin account could escape the restricted CLI and execute arbitrary shell instructions.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

OCS Inventory 2.4.1 is prone to a remote command-execution vulnerability. Specifically, this issue occurs because the content of the ipdiscover_analyser rzo GET parameter is concatenated to a string used in an exec() call in the PHP code. Authentication is needed in order to exploit this vulnerability.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure and Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the interface. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system (OS) with the permissions of a special non-root user. In this way, an attacker could take control of the affected system, which would allow them to obtain and alter sensitive data. The attacker could also affect the devices that are managed by the affected system by pushing arbitrary configuration files, retrieving device credentials and confidential information, and ultimately undermining the stability of the devices, causing a denial of service (DoS) condition.

Multiple vulnerabilities in Cisco DNA Spaces Connector could allow an authenticated, remote attacker to perform a command injection attack on an affected device. These vulnerabilities are due to insufficient input sanitization when executing affected commands. A high-privileged attacker could exploit these vulnerabilities on a Cisco DNA Spaces Connector by injecting crafted input during command execution. A successful exploit could allow the attacker to execute arbitrary commands as root within the Connector docker container.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 40 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 16 of 46).

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

An issue was discovered on D-Link DWR-116 through 1.06, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. An authenticated attacker may execute arbitrary code by injecting the shell command into the chkisg.htm page Sip parameter. This allows for full control over the device internals.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 36 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 25 of 46).

A remote authenticated command Injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass CLI could allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 43 of 46).

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 14 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 44 of 46).

On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can forge an HTTP request to inject operating system commands that can be executed on the device with higher privileges, aka remote code execution.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 28 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 37 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 12 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 39 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 38 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 29 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 4 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 19 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 46 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 6 of 46).

All Phoenix Contact managed FL SWITCH 3xxx, 4xxx, 48xx products running firmware version 1.0 to 1.33 are prone to OS command injection.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 5 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 1 of 6).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 17 of 46).

The '/common/ajax_email_connection_test.php' script in the Quest KACE System Management Appliance 8.0.318 is accessible by any authenticated user and can be abused to execute arbitrary commands on the system. This script is vulnerable to command injection via the unsanitized user input 'TEST_SERVER' sent to the script via the POST method.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 33 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 15 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 34 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 23 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 27 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 31 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 26 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 8 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 41 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 45 of 46).

In order to perform actions that require higher privileges, the Quest KACE System Management Appliance 8.0.318 relies on a message queue that runs daemonized with root privileges and only allows a set of commands to be executed. A command injection vulnerability exists within this message queue which allows low-privilege users to append arbitrary commands that will be run as root.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 13 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 3 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 18 of 46).