The HTTPS Proxy feature in Cisco AsyncOS before 8.5.3-051 and 9.x before 9.0.0-485 on Web Security Appliance (WSA) devices allows remote attackers to cause a denial of service (service outage) by leveraging certain intranet connectivity and sending a malformed HTTPS request, aka Bug ID CSCuu24840.
Cisco TelePresence Video Communication Server (VCS) X8.5.1 and X8.5.2 allows remote authenticated users to cause a denial of service (VoIP outage) via a crafted SIP message, aka Bug ID CSCuu43026.
A vulnerability in the Session Initiation Protocol (SIP) inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload or trigger high CPU, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of SIP traffic. An attacker could exploit this vulnerability by sending SIP requests designed to specifically trigger this issue at a high rate across an affected device. Software updates that address this vulnerability are not yet available.
Cisco IOS XR through 5.3.2 mishandles Local Packet Transport Services (LPTS) flow-base entries, which allows remote attackers to cause a denial of service (session drop) by making many connection attempts to open TCP ports, aka Bug ID CSCux95576.
Cisco IP Phone 8800 devices with software 11.0(1) allow remote attackers to cause a denial of service (memory corruption) via a crafted HTTP request, aka Bug ID CSCuz03038.
Cisco Small Business 500 Wireless Access Point devices with firmware 1.0.4.4 allow remote attackers to set the system time via a crafted POST request, aka Bug ID CSCuy01457.
Cisco Prime Infrastructure 1.2 through 3.1 and Evolved Programmable Network Manager (EPNM) 1.2 and 2.0 allow remote authenticated users to execute arbitrary commands or upload files via a crafted HTTP request, aka Bug ID CSCuz01488.
Cisco IOS XR 4.2.3, 4.3.0, 4.3.4, and 5.3.1 on ASR 9000 devices allows remote attackers to cause a denial of service (CRC and symbol errors, and interface flap) via crafted bit patterns in packets, aka Bug ID CSCuv78548.
Cisco RV180 and RV180W devices allow remote authenticated users to execute arbitrary commands as root via a crafted HTTP request, aka Bug ID CSCuz48592.
The Mobile and Remote Access (MRA) component in Cisco TelePresence Video Communication Server (VCS) X8.1 through X8.7 and Expressway X8.1 through X8.6 mishandles certificates, which allows remote attackers to bypass authentication via an arbitrary trusted certificate, aka Bug ID CSCuz64601.
Cisco ONS 15310-CL, 15310-MA, 15327, 15454, 15454 SDH, and 15600 with software 7.0.2 through 7.0.6, 7.2.2, 8.0.x, 8.5.1, and 8.5.2 allows remote attackers to cause a denial of service (control-card reset) via a crafted TCP session.
The administrative web interface in Cisco Prime Infrastructure (PI) before 3.1.1 allows remote authenticated users to execute arbitrary commands via crafted field values, aka Bug ID CSCuy96280.
A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter that contains certain rules. More Information: CSCux59873. Known Affected Releases: 8.5.6-106 9.1.0-032 9.7.0-125. Known Fixed Releases: 9.1.1-038 9.7.1-066.
The web GUI on Cisco Small Business 500 devices 1.2.0.92 allows remote attackers to cause a denial of service via a crafted HTTP request, aka Bug ID CSCul65330.
The Neighbor Discovery (ND) protocol implementation in the IPv6 stack in Cisco IOS XE 2.1 through 3.17S, IOS XR 2.0.0 through 5.3.2, and NX-OS allows remote attackers to cause a denial of service (packet-processing outage) via crafted ND messages, aka Bug ID CSCuz66542, as exploited in the wild in May 2016.
The Locator/ID Separation Protocol (LISP) implementation in Cisco IOS 15.1 and 15.2 and NX-OS 4.1 through 6.2 allows remote attackers to cause a denial of service (device reload) via a crafted header in a packet, aka Bug ID CSCuu64279.
The web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote attackers to execute arbitrary code as root via a crafted HTTP request, aka Bug ID CSCux82428.
Cisco TelePresence Video Communications Server (VCS) X8.x before X8.7.2 allows remote attackers to cause a denial of service (service disruption) via a crafted URI in a SIP header, aka Bug ID CSCuy43258.
Cisco Aironet Access Point Software 8.2(100.0) on 1830e, 1830i, 1850e, 1850i, 2800, and 3800 access points allows local users to obtain Linux root access via crafted CLI command parameters, aka Bug ID CSCuy64037.
Cisco FireSIGHT System Software 5.4.0 through 6.0.1 and ASA with FirePOWER Services 5.4.0 through 6.0.0.1 allow remote attackers to bypass malware protection via crafted fields in HTTP headers, aka Bug ID CSCux22726.
Cisco WebEx Meetings Server 2.6 allows remote authenticated users to conduct command-injection attacks via vectors related to an upload's file type, aka Bug ID CSCuy92715.
The license-certificate upload functionality on Cisco 8800 phones with software 11.0(1) allows remote authenticated users to delete arbitrary files via an invalid file, aka Bug ID CSCuz03010.
Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.
The Grapevine update process in Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM) 1.0 allows remote authenticated users to execute arbitrary commands as root via a crafted upgrade parameter, aka Bug ID CSCux15507.
Multiple vulnerabilities in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow a remote attacker with network-operator privileges to conduct a cross-site scripting (XSS) attack or a reflected file download (RFD) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.
Cisco NX-OS 4.0 through 7.3 and 11.0 through 11.2 on 1000v, 2000, 3000, 3500, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote attackers to cause a denial of service (device reload) by leveraging a peer relationship to send a crafted BGP UPDATE message, aka Bug IDs CSCuq77105 and CSCux11417.
Cisco FireSIGHT System Software 5.3.0, 5.3.1, 5.4.0, 6.0, and 6.0.1 allows remote attackers to bypass Snort rules via crafted parameters in the header of an HTTP packet, aka Bug ID CSCuz20737.
CISCO IP 8800 phones with software 11.0.1 and earlier allow local users to gain privileges for OS command execution via crafted CLI commands, aka Bug ID CSCuz03005.
The web framework in Cisco Unified Computing System (UCS) Performance Manager 2.0.0 and earlier allows remote authenticated users to execute arbitrary commands via crafted parameters in a GET request, aka Bug ID CSCuy07827.
Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.
Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) allow local users to obtain root access via crafted CLI input, aka Bug ID CSCuy21892.
Cisco Prime Infrastructure 3.0 allows remote authenticated users to execute arbitrary code via a crafted HTTP request that is mishandled during viewing of a log file, aka Bug ID CSCuw81494.
The web-based management interface on Cisco Small Business 220 devices with firmware before 1.0.1.1 allows remote attackers to cause a denial of service (interface outage) via a crafted HTTP request, aka Bug ID CSCuz76238.
goform/WClientMACList on Cisco EPC3928 devices allows remote attackers to cause a denial of service (device crash) via a long h_sortWireless parameter, related to a "Gateway Client List Denial of Service" issue, aka Bug ID CSCux24948.
A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.
Cisco Access Point devices with software 8.2(102.43) allow remote attackers to cause a denial of service (device reload) via crafted ARP packets, aka Bug ID CSCuy55803.
A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device. Cisco has not released software updates that address this vulnerability.
Multiple vulnerabilities in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system, gain access to sensitive information, and view information that they are not authorized to access. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted PIM packet to an affected device. A successful exploit could allow the attacker to cause a traffic loop, resulting in a DoS condition.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.
A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client Software could allow an authenticated, local attacker to overwrite VPN profiles on an affected device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to modify VPN profile files. To exploit this vulnerability, the attacker must have valid credentials on the affected system.
A vulnerability in the software-based SSL/TLS message handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message through an affected device. SSL/TLS messages sent to an affected device do not trigger this vulnerability. A successful exploit could allow the attacker to cause a process to crash. This crash would then trigger a reload of the device. No manual intervention is needed to recover the device after the reload.
Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.