Cisco IOS XE 2.x and 3.x before 3.4.5S, and 3.5 through 3.7 before 3.7.1S, on 1000 series Aggregation Services Routers (ASR) allows remote attackers to cause a denial of service (card reload) by sending many crafted L2TP packets, aka Bug ID CSCtz23293.

The NETIO and IPV4_IO processes in Cisco IOS XR 3.8 through 4.1, as used in Cisco Carrier Routing System and other products, allow remote attackers to cause a denial of service (CPU consumption) via crafted network traffic, aka Bug ID CSCti59888.

A vulnerability in the packet processing functionality of Cisco TelePresence Collaboration Endpoint (CE) Software and Cisco RoomOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted H.323 traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to either reboot normally or reboot into maintenance mode, which could result in a DoS condition on the device.

A vulnerability in the Cisco Fabric Services over IP (CFSoIP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of incoming CFSoIP packets. An attacker could exploit this vulnerability by sending crafted CFSoIP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

Cisco Unified Communications Manager (CUCM) 8.6 before 8.6(2a)su2, 8.6 BE3k before 8.6(4) BE3k, and 9.x before 9.0(1) allows remote attackers to cause a denial of service (CPU consumption and GUI and voice outages) via malformed packets to unused UDP ports, aka Bug ID CSCtx43337.

A vulnerability in the remote access SSL VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper validation of errors that are logged as a result of client connections that are made using remote access VPN. An attacker could exploit this vulnerability by sending crafted requests to an affected system. A successful exploit could allow the attacker to cause the affected device to restart, resulting in a DoS condition.

A vulnerability in the web services interface for remote access VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

The management API in the XML API management service in the Manager component in Cisco Unified Computing System (UCS) 1.x before 1.2(1b) allows remote attackers to cause a denial of service (service outage) via a malformed request, aka Bug ID CSCtg48206.

Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc43709.

A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063.

A vulnerability in the implementation of the PROFINET Discovery and Configuration Protocol (PN-DCP) for Cisco IOS 12.2 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper parsing of ingress PN-DCP Identify Request packets destined to an affected device. An attacker could exploit this vulnerability by sending a crafted PN-DCP Identify Request packet to an affected device and then continuing to send normal PN-DCP Identify Request packets to the device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to process PROFINET messages. Beginning with Cisco IOS Software Release 12.2(52)SE, PROFINET is enabled by default on all the base switch module and expansion-unit Ethernet ports. Cisco Bug IDs: CSCuz47179.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for the Cisco Email Security Appliance could allow an unauthenticated, remote attacker to cause an affected device to run out of memory and stop scanning and forwarding email messages. When system memory is depleted, it can cause the filtering process to crash, resulting in a denial of service (DoS) condition on the device. This vulnerability affects software version 9.0 through the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter or content filter to incoming email attachments. The vulnerability is not limited to any specific rules or actions for a message filter or content filter. Cisco Bug IDs: CSCvd29354.

A vulnerability in the detection engine parsing of IPv6 packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause high CPU utilization or to cause a denial of service (DoS) condition because the Snort process restarts unexpectedly. The vulnerability is due to improper input validation of the fields in the IPv6 extension header packet. An attacker could exploit this vulnerability by sending a malicious IPv6 packet to the detection engine on the targeted device. An exploit could allow the attacker to cause a DoS condition if the Snort process restarts and traffic inspection is bypassed or traffic is dropped. This vulnerability is specific to IPv6 traffic only. This vulnerability affects Cisco Firepower System Software Releases 6.0 and later when the software has one or more file action policies configured and is running on any of the following Cisco products: 3000 Series Industrial Security Appliances (ISR), Adaptive Security Appliance (ASA) 5500-X Series with FirePOWER Services, Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances, Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances, FirePOWER 7000 Series Appliances, FirePOWER 8000 Series Appliances, Firepower Threat Defense for Integrated Services Routers (ISRs), Firepower 2100 Series Security Appliances, Firepower 4100 Series Security Appliances, Firepower 9300 Series Security Appliances, Virtual Next-Generation Intrusion Prevention System (NGIPSv) for VMware. Cisco Bug IDs: CSCvd34776.

A vulnerability with IPv6 UDP ingress packet processing in Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause an unexpected reload of the device. The vulnerability is due to incomplete IPv6 UDP header validation. An attacker could exploit this vulnerability by sending a crafted IPv6 UDP packet to a specific port on the targeted device. An exploit could allow the attacker to impact the availability of the device as it could unexpectedly reload. This vulnerability affects Cisco Wireless LAN Controller (WLC) running software version 8.2.121.0 or 8.3.102.0. Cisco Bug IDs: CSCva98592.

Cisco IOS 12.2 and IOS XE 3.14 through 3.16 and 16.1 allow remote attackers to cause a denial of service (device reload) via crafted IP Detail Record (IPDR) packets, aka Bug ID CSCuu35089.

Cisco ACE30 Application Control Engine Module through A5 3.3 and ACE 4700 Application Control Engine appliances through A5 3.3 allow remote attackers to cause a denial of service (device reload) via crafted (1) SSL or (2) TLS packets, aka Bug ID CSCvb16317.

Cisco IOS 12.2 through 12.4 and 15.0 through 15.6 and IOS XE 3.1 through 3.17 and 16.2 allow remote attackers to cause a denial of service (device reload) via crafted fields in an H.323 message, aka Bug ID CSCux04257.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop scanning and forwarding email messages due to a denial of service (DoS) condition. Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter or content filter to incoming email attachments. The vulnerability is not limited to any specific rules or actions for a message filter or content filter. More Information: CSCuz63143. Known Affected Releases: 8.5.7-042 9.7.0-125. Known Fixed Releases: 10.0.0-125 9.1.1-038 9.7.2-047.

The DNS-over-TCP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via a crafted IPv4 DNS TCP stream, aka Bug ID CSCuf28733.

Cisco NX-OS on Nexus 5500 devices 4.x and 5.x before 5.0(3)N2(2), Nexus 3000 devices 5.x before 5.0(3)U3(2), and Unified Computing System (UCS) 6200 devices before 2.0(1w) allows remote attackers to cause a denial of service (device reload) by sending a jumbo packet to the management interface, aka Bug IDs CSCtx17544, CSCts10593, and CSCtx95389.

The DHCPv6 server in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x, 3.1.xS before 3.1.4S, 3.1.xSG and 3.2.xSG before 3.2.5SG, 3.2.xS, 3.2.xXO, 3.3.xS, and 3.3.xSG before 3.3.1SG allows remote attackers to cause a denial of service (device reload) via a malformed DHCPv6 packet, aka Bug ID CSCto57723.

Cisco IOS XR before 4.2.1 on ASR 9000 series devices and CRS series devices allows remote attackers to cause a denial of service (packet transmission outage) via a crafted packet, aka Bug IDs CSCty94537 and CSCtz62593.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) and Cisco Content Security Management Appliance (SMA) could allow an unauthenticated, remote attacker to cause repeated crashes in some internal processes that are running on the affected devices, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation of email attachments. An attacker could exploit this vulnerability by sending an email message with a crafted attachment through an affected device. A successful exploit could allow the attacker to cause specific processes to crash repeatedly, resulting in the complete unavailability of both the Cisco Advanced Malware Protection (AMP) and message tracking features and in severe performance degradation while processing email. After the affected processes restart, the software resumes filtering for the same attachment, causing the affected processes to crash and restart again. A successful exploit could also allow the attacker to cause a repeated DoS condition. Manual intervention may be required to recover from this situation.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 7.0 through 7.2 before 7.2(5.7), 8.0 before 8.0(5.27), 8.1 before 8.1(2.53), 8.2 before 8.2(5.8), 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.2) and the Firewall Services Module (FWSM) 3.1 and 3.2 before 3.2(23) and 4.0 and 4.1 before 4.1(8) in Cisco Catalyst 6500 series devices, when multicast routing is enabled, allow remote attackers to cause a denial of service (device reload) via a crafted IPv4 PIM message, aka Bug IDs CSCtr47517 and CSCtu97367.

The Smart Install feature in Cisco IOS 12.2, 15.0, 15.1, and 15.2 allows remote attackers to cause a denial of service (device reload) by sending a malformed Smart Install message over TCP, aka Bug ID CSCtt16051.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause the CPU utilization to increase to 100 percent, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of email messages that contain large attachments. An attacker could exploit this vulnerability by sending a malicious email message through the targeted device. A successful exploit could allow the attacker to cause a permanent DoS condition due to high CPU utilization. This vulnerability may require manual intervention to recover the ESA.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.4 before 8.4(2.11) and 8.5 before 8.5(1.4) allow remote attackers to cause a denial of service (device reload) via (1) IPv4 or (2) IPv6 packets that trigger syslog message 305006, aka Bug ID CSCts39634.

A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliance could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of HTTP and HTTPS requests. An attacker could exploit this vulnerability by sending a malformed HTTP or HTTPS request to an affected device. An exploit could allow the attacker to cause a restart of the web proxy process, resulting in a temporary DoS condition.

A vulnerability in the Cisco Encrypted Traffic Analytics (ETA) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a logic error that exists when handling a malformed incoming packet, leading to access to an internal data structure after it has been freed. An attacker could exploit this vulnerability by sending crafted, malformed IP packets to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition.

A vulnerability in the HTTPS decryption feature of Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Secure Sockets Layer (SSL) server certificates. An attacker could exploit this vulnerability by installing a malformed certificate in a web server and sending a request to it through the Cisco WSA. A successful exploit could allow the attacker to cause an unexpected restart of the proxy process on an affected device.

A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a parsing issue on DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit this vulnerability by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to reload the device and causing a DoS condition.

A vulnerability in the Network Address Translation 64 (NAT64) functions of Cisco IOS Software could allow an unauthenticated, remote attacker to cause either an interface queue wedge or a device reload. The vulnerability is due to the incorrect handling of certain IPv4 packet streams that are sent through the device. An attacker could exploit this vulnerability by sending specific IPv4 packet streams through the device. An exploit could allow the attacker to either cause an interface queue wedge or a device reload, resulting in a denial of service (DoS) condition.

A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a parsing issue on DNS packets. An attacker could exploit these vulnerabilities by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the SNMP application to leak system memory, which could cause an affected device to restart unexpectedly. The vulnerability is due to improper error handling when processing inbound SNMP packets. An attacker could exploit this vulnerability by sending multiple crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the SNMP application to leak system memory because of an improperly handled error condition during packet processing. Over time, this memory leak could cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

A vulnerability in the ISDN functions of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect processing of specific values in the Q.931 information elements. An attacker could exploit this vulnerability by calling the affected device with specific Q.931 information elements being present. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device.

A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability are due to a parsing issue on DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the cryptographic driver for Cisco Adaptive Security Appliance Software (ASA) and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reboot unexpectedly. The vulnerability is due to incomplete input validation of a Secure Sockets Layer (SSL) or Transport Layer Security (TLS) ingress packet header. An attacker could exploit this vulnerability by sending a crafted TLS/SSL packet to an interface on the targeted device. An exploit could allow the attacker to cause the device to reload, which will result in a denial of service (DoS) condition. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is required to exploit this vulnerability.

The ESMTP inspection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2 through 8.5 allows remote attackers to cause a denial of service (CPU consumption) via an unspecified closing sequence, aka Bug ID CSCtt32565.

A vulnerability in the TCP processing engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of TCP traffic. An attacker could exploit this vulnerability by sending a specific sequence of packets at a high rate through an affected device. A successful exploit could allow the attacker to temporarily disrupt traffic through the device while it reboots.

A vulnerability in the Point-to-Point Tunneling Protocol (PPTP) VPN packet processing functionality in Cisco Aironet Access Points (APs) could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Generic Routing Encapsulation (GRE) frames that pass through the data plane of an affected AP. An attacker could exploit this vulnerability by associating to a vulnerable AP, initiating a PPTP VPN connection to an arbitrary PPTP VPN server, and sending a malicious GRE frame through the data plane of the AP. A successful exploit could allow the attacker to cause an internal process of the targeted AP to crash, which in turn would cause the AP to reload. The AP reload would cause a DoS condition for clients that are associated with the AP.

The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle an external loop between a pair of dot1x enabled ports, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many unicast EAPoL Protocol Data Units (PDUs), aka Bug ID CSCtq36336.

Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54 and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). Cisco UCS 6200 and 6300 Fabric Interconnect devices are affected in versions prior to 3.2(2b).

Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) do not properly handle Online Certificate Status Protocol (OCSP) connection failures, which allows remote OCSP responders to cause a denial of service (TCP socket exhaustion) by rejecting connection attempts, aka Bug ID CSCsz36816.

A vulnerability in the FTP application layer gateway (ALG) functionality used by Network Address Translation (NAT), NAT IPv6 to IPv4 (NAT64), and the Zone-Based Policy Firewall (ZBFW) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a buffer overflow that occurs when an affected device inspects certain FTP traffic. An attacker could exploit this vulnerability by performing a specific FTP transfer through the device. A successful exploit could allow the attacker to cause the device to reload.

A vulnerability in the RADIUS Change of Authorization (CoA) code of Cisco TrustSec, a feature within Cisco IOS XE Software, could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of a malformed packet. An attacker could exploit this vulnerability by sending a malformed packet to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

A vulnerability in the FTP inspection engine of Cisco Adaptive Security (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of FTP data. An attacker could exploit this vulnerability by sending malicious FTP traffic through an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.