An issue was discovered on D-Link DIR-818LW devices from 2.05.B03 to 2.06B01 BETA. There is a command injection in HNAP1 SetWanSettings via an XML injection of the value of the Gateway key.

An issue was discovered on D-Link DAP-1650 devices before 1.04B02_J65H Hot Fix. Attackers can execute arbitrary commands.

An issue was discovered in D-Link DIR-806 devices. There is a command injection in function hnap_main, which calls system() without checking the parameter that can be controlled by user, and finally allows remote attackers to execute arbitrary shell commands with a special HTTP header.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via the urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because REMOTE_PORT is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

D-Link DIR-X3260 prog.cgi SOAPAction Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the SOAPAction request header provided to the prog.cgi endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-20983.

An issue was discovered on D-Link DIR-802 A1 devices through 1.00b05. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

/jsonrpc on D-Link DIR-841 3.03 and 3.04 devices allows authenticated command injection via ping, ping6, or traceroute (under System Tools).

A vulnerability classified as critical has been found in D-Link DI-7300G+ 19.12.25A1. Affected is an unknown function of the file wget_test.asp. The manipulation of the argument url leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 v1.01rc001 Wi-Fi access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of CGI scripts. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-11369.

An issue was discovered in D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/addRouting route. This could lead to Command Injection via Shell Metacharacters.

A vulnerability, which was classified as critical, has been found in D-Link DI-7300G+ 19.12.25A1. Affected by this issue is some unknown functionality of the file in proxy_client.asp. The manipulation of the argument proxy_srv/proxy_lanport/proxy_lanip/proxy_srvport leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in D-Link DI-7300G+ 19.12.25A1. Affected by this vulnerability is an unknown functionality of the file httpd_debug.asp. The manipulation of the argument Time leads to os command injection. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in D-Link DI-7300G+ and DI-8200G 17.12.20A1/19.12.25A1. This affects an unknown part of the file msp_info.htm. The manipulation of the argument flag/cmd/iface leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this vulnerability is the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-822 Rev.B 202KRb06, DIR-822 Rev.C 3.10B06, DIR-860L Rev.B 2.03.B03, DIR-868L Rev.B 2.05B02, DIR-880L Rev.A 1.20B01_01_i3se_BETA, and DIR-890L Rev.A 1.21B02_BETA devices mishandle IsAccessPoint in /HNAP1/SetAccessPointMode. In the SetAccessPointMode.php source code, the IsAccessPoint parameter is saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. A vulnerable /HNAP1/SetAccessPointMode XML message could have shell metacharacters in the IsAccessPoint element such as the `telnetd` string.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. Affected is the function setSystemAdmin of the file /setSystemAdmin. The manipulation of the argument AdminID leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

In the /HNAP1/SetWiFiVerifyAlpha message, the WPSPIN parameter is vulnerable, and the vulnerability affects D-Link DIR-822 B1 202KRb06 devices. In the SetWiFiVerifyAlpha.php source code, the WPSPIN parameter is saved in the $rphyinf1."/media/wps/enrollee/pin" and $rphyinf2."/media/wps/enrollee/pin" and $rphyinf3."/media/wps/enrollee/pin" internal configuration memory without any regex checking. And in the do_wps function of the wps.php source code, the data in $rphyinf3."/media/wps/enrollee/pin" is used with the wpatalk command without any regex checking. A vulnerable /HNAP1/SetWiFiVerifyAlpha XML message could have shell metacharacters in the WPSPIN element such as the `telnetd` string.

In the /HNAP1/SetRouterSettings message, the RemotePort parameter is vulnerable, and the vulnerability affects D-Link DIR-818LW Rev.A 2.05.B03 and DIR-822 B1 202KRb06 devices. In the SetRouterSettings.php source code, the RemotePort parameter is saved in the $path_inf_wan1."/web" internal configuration memory without any regex checking. And in the IPTWAN_build_command function of the iptwan.php source code, the data in $path_inf_wan1."/web" is used with the iptables command without any regex checking. A vulnerable /HNAP1/SetRouterSettings XML message could have shell metacharacters in the RemotePort element such as the `telnetd` string.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been rated as critical. Affected by this issue is the function setSystemWizard/setSystemControl of the file /setSystemWizard. The manipulation of the argument AdminID leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in D-Link DIR-816 1.10CNB05. Affected is the function setipsec_config of the file /goform/setipsec_config. The manipulation of the argument localIP/remoteIP leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/form2systime.cgi route. This could lead to command injection via shell metacharacters in the datetime parameter.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/sylogapply route. This could lead to command injection via the syslogIp parameter after /goform/clearlog is invoked.

OS command injection vulnerability in soap.cgi (soapcgi_main in cgibin) in D-Link DIR-880L DIR-880L_REVA_FIRMWARE_PATCH_1.08B04 and previous versions, DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-65L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to execute arbitrary OS commands via the service parameter.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/NTPSyncWithHost route. This could lead to command injection via shell metacharacters.

On D-Link DIR-823G devices, the GoAhead configuration allows /HNAP1 Command Injection via shell metacharacters in the POST data, because this data is sent directly to the "system" library function.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetIPv6FirewallSettings requests to the web management portal. When parsing subelements within the IPv6FirewallRule element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16148.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been rated as critical. Affected by this issue is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument group leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through a specific functionality provided by SSH and Telnet.

An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/Diagnosis route. This could lead to command injection via shell metacharacters in the sendNum parameter.

The D-Link DSL6740C modem has an OS Command Injection vulnerability, allowing remote attackers with administrator privileges to inject and execute arbitrary system commands through the specific web page.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

D-Link DCH-M225 1.05b01 and earlier devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the spotifyConnect.php userName parameter.

D-Link DSL-GS225 J1 AU_1.0.4 devices allow an admin to execute OS commands by placing shell metacharacters after a supported CLI command, as demonstrated by ping -c1 127.0.0.1; cat/etc/passwd. The CLI is reachable by TELNET.

D-Link DSL-3782 v1.03 and below was discovered to contain a command injection vulnerability via the function byte_4C0160.

HNAP1/control/SetMasterWLanSettings.php in D-Link D-Link Router DIR-846 DIR-846 A1_100.26 allows remote attackers to execute arbitrary commands via shell metacharacters in the ssid0 or ssid1 parameter.

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the Captcha field to Login.

D-Link DNS-320 FW v2.06B01 Revision Ax is affected by command injection in the system_mgr.cgi component, which can lead to remote arbitrary code execution.

D-Link DIR-615 2.5.17 devices allow Remote Code Execution via shell metacharacters in the Host field of the System / Traceroute screen.

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the PrivateLogin field to Login.

A command injection vulnerability in the component /SetTriggerLEDBlink/Blink of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

A lack of input validation and access controls in Lua CGIs on D-Link DSR VPN routers may result in arbitrary input being passed to system command APIs, resulting in arbitrary command execution with root privileges. This affects DSR-150, DSR-250, DSR-500, and DSR-1000AC with firmware 3.14 and 3.17.

A command injection vulnerability in the component /setnetworksettings/SubnetMask of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

D-Link G416 flupl pythonapp Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21297.

An issue was discovered on D-Link DSL-2888A devices with firmware prior to AU_2.31_V1.1.47ae55. It contains an execute_cmd.cgi feature (that is not reachable via the web user interface) that lets an authenticated user execute Operating System commands.

D-Link G416 flupl pythonmodules Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21295.

D-Link G416 cfgsave upusb Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21289.