A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been rated as critical. Affected by this issue is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument group leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DIR-816 A2 1.10CNB04 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/setDeviceSettings of the component Web Interface. The manipulation of the argument statuscheckpppoeuser leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252139.

D-Link DIR-822+ V1.0.2 was found to contain a command injection in SetStaticRouteSettings function. allows remote attackers to execute arbitrary commands via shell.

An issue discovered in D-Link dir815 v.1.01SSb08.bin allows a remote attacker to execute arbitrary code via a crafted POST request to the service parameter in the soapcgi_main function of the cgibin binary component.

A vulnerability was found in D-Link DAR-8000-10 up to 20230809. It has been classified as critical. This affects an unknown part of the file /app/sys1.php. The manipulation of the argument cmd with the input id leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-238047. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

D-LINK DIR-806 1200M11AC wireless router DIR806A1_FW100CNb11 is vulnerable to command injection.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the lan(0)_dhcps_staticlist parameter. This vulnerability is exploited via a crafted POST request.

D-LINK DIR-806 1200M11AC wireless router DIR806A1_FW100CNb11 is vulnerable to command injection due to lax filtering of REMOTE_PORT parameters.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via a urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because HTTP_ST is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

An issue was discovered in D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/addRouting route. This could lead to Command Injection via Shell Metacharacters.

D-link DIR-816 A2 v1.10 is affected by a remote code injection vulnerability. An HTTP request parameter can be used in command string construction in the handler function of the /goform/dir_setWanWifi, which can lead to command injection via shell metacharacters in the statuscheckpppoeuser parameter.

The UPnP endpoint URL /gena.cgi in the D-Link DIR-859 Wi-Fi router 1.05 and 1.06B01 Beta01 allows an Unauthenticated remote attacker to execute system commands as root, by sending a specially crafted HTTP SUBSCRIBE request to the UPnP service when connecting to the local network.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been rated as critical. Affected by this issue is the function setSystemWizard/setSystemControl of the file /setSystemWizard. The manipulation of the argument AdminID leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

On D-Link DIR-859 A3-1.06 and DIR-850 A1.13 devices, /etc/services/DEVICE.TIME.php allows command injection via the $SERVER variable.

D-Link DIR-846 devices with firmware 100A35 allow remote attackers to execute arbitrary OS commands as root by leveraging admin access and sending a /HNAP1/ request for SetWizardConfig with shell metacharacters to /squashfs-root/www/HNAP1/control/SetWizardConfig.php.

The login_mgr.cgi script in D-Link DNS-320 through 2.05.B10 is vulnerable to remote command injection.

D-Link DIR-868L B1 router firmware version FW2.05WWB02 contains an unauthenticated OS command injection vulnerability in the fileaccess.cgi component. The endpoint /dws/api/UploadFile accepts a pre_api_arg parameter that is passed directly to system-level shell execution functions without sanitization or authentication. Remote attackers can exploit this to execute arbitrary commands as root via crafted HTTP requests.

A vulnerability, which was classified as critical, was found in D-Link DIR-816 1.10CNB05. Affected is the function setipsec_config of the file /goform/setipsec_config. The manipulation of the argument localIP/remoteIP leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

The web interface of multiple D-Link routers, including DIR-600 rev B (≤2.14b01) and DIR-300 rev B (≤2.13), contains an unauthenticated OS command injection vulnerability in command.php, which improperly handles the cmd POST parameter. A remote attacker can exploit this flaw without authentication to spawn a Telnet service on a specified port, enabling persistent interactive shell access as root.

An OS command injection vulnerability exists in various legacy D-Link routers—including DIR-300 rev B and DIR-600 (firmware ≤ 2.13 and ≤ 2.14b01, respectively)—due to improper input handling in the unauthenticated command.php endpoint. By sending specially crafted POST requests, a remote attacker can execute arbitrary shell commands with root privileges, allowing full takeover of the device. This includes launching services such as Telnet, exfiltrating credentials, modifying system configuration, and disrupting availability. The flaw stems from the lack of authentication and inadequate sanitation of the cmd parameter.

D-Link DNS-320 FW v2.06B01 Revision Ax is affected by command injection in the system_mgr.cgi component, which can lead to remote arbitrary code execution.

D-Link DIR_878_FW1.30B08 was discovered to contain a command injection vulnerability via the component /SetNetworkSettings/SubnetMask. This vulnerability allows attackers to escalate privileges to root via a crafted payload.

A flaw has been found in D-Link DIR-868L 110b03. This affects the function sub_1BF84 of the component SSDP Service. This manipulation of the argument ST causes os command injection. It is possible to initiate the attack remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on D-Link DAP-1650 devices before 1.04B02_J65H Hot Fix. Attackers can execute arbitrary commands.

D-Link Go-RT-AC750 revA_v101b03 was discovered to contain a command injection vulnerability via the service parameter at genacgi_main.

D-Link DCH-M225 1.05b01 and earlier devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the spotifyConnect.php userName parameter.

An issue was discovered in D-Link DIR-806 devices. There is a command injection in function hnap_main, which calls system() without checking the parameter that can be controlled by user, and finally allows remote attackers to execute arbitrary shell commands with a special HTTP header.

A security vulnerability has been detected in D-Link DIR-852 1.00CN B09. Impacted is the function soapcgi_main of the file soap.cgi of the component SOAP Service. Such manipulation of the argument service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical was found in D-Link DI-7300G+ 19.12.25A1. Affected by this vulnerability is an unknown functionality of the file httpd_debug.asp. The manipulation of the argument Time leads to os command injection. The exploit has been disclosed to the public and may be used.

HNAP1/control/SetMasterWLanSettings.php in D-Link D-Link Router DIR-846 DIR-846 A1_100.26 allows remote attackers to execute arbitrary commands via shell metacharacters in the ssid0 or ssid1 parameter.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via the urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because REMOTE_PORT is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

An unauthenticated command injection vulnerability exists in the cookie handling process of the lighttpd web server on D-Link DSP-W110A1 firmware version 1.05B01. This occurs when specially crafted cookie values are processed, allowing remote attackers to execute arbitrary commands on the underlying Linux operating system. Successful exploitation enables full system compromise.

A vulnerability was determined in D-Link DIR-820LW 2.03. Affected is the function ssdpcgi_main of the component SSDP. Executing a manipulation can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via the urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because SERVER_ID is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

An issue in dlink DIR 832x 240802 allows a remote attacker to execute arbitrary code via the function 0x417234

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the PrivateLogin field to Login.

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the Captcha field to Login.

An issue in dlink DIR 823x 240802 allows a remote attacker to execute arbitrary code via the target_addr key value and the function 0x41710c

D-Link Go-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 are vulnerable to Command Injection via cgibin, ssdpcgi_main.

An OS command injection vulnerability in D-Link DIR-823G firmware version 1.02B05 allows unauthorized attackers to execute arbitrary operating system commands via a crafted GET request to EXCU_SHELL.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this vulnerability is the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

OS command injection vulnerability in soap.cgi (soapcgi_main in cgibin) in D-Link DIR-880L DIR-880L_REVA_FIRMWARE_PATCH_1.08B04 and previous versions, DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-65L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to execute arbitrary OS commands via the service parameter.

The D-Link DSR-250 (3.14) DSR-1000N (2.11B201) UPnP service contains a command injection vulnerability, which can cause remote command execution.

An issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet.

Multiple D-Link DIR-series routers, including DIR-110, DIR-412, DIR-600, DIR-610, DIR-615, DIR-645, and DIR-815 firmware version 1.03, contain a vulnerability in the service.cgi endpoint that allows remote attackers to execute arbitrary system commands without authentication. The flaw stems from improper input handling in the EVENT=CHECKFW parameter, which is passed directly to the system shell without sanitization. A crafted HTTP POST request can inject commands that are executed with root privileges, resulting in full device compromise. These router models are no longer supported at the time of assignment and affected version ranges may vary. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-08-21 UTC.

On D-Link DIR-818LW Rev.A 2.05.B03 and DIR-860L Rev.B 2.03.B03 devices, unauthenticated remote OS command execution can occur in the soap.cgi service of the cgibin binary via an "&&" substring in the service parameter. NOTE: this issue exists because of an incomplete fix for CVE-2018-6530.

Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetWizardConfig.php in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicoius users can use this vulnerability to use "\ " or backticks in the shell metacharacters in the ssid0 or ssid1 parameters to cause arbitrary command execution. Since CVE-2019-17510 vulnerability has not been patched and improved www/hnap1/control/setwizardconfig.php, can also use line breaks and backquotes to bypass.