In ABB IP GATEWAY 3.39 and prior, some configuration files contain passwords stored in plain-text, which may allow an attacker to gain unauthorized access.

An Improper Authentication issue was discovered in ABB VSN300 WiFi Logger Card versions 1.8.15 and prior, and VSN300 WiFi Logger Card for React versions 2.1.3 and prior. By accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access internal information about status and connected devices without authenticating.

The HMISimulator component of ABB PB610 Panel Builder 600 uses the readFile/writeFile interface to manipulate the work file. Path configuration in PB610 HMISimulator versions 2.8.0.424 and earlier potentially allows access to files outside of the working directory, thus potentially supporting unauthorized file access.

In ABB SREA-01 revisions A, B, C: application versions up to 3.31.5, and SREA-50 revision A: application versions up to 3.32.8, an attacker may access internal files of ABB SREA-01 and SREA-50 legacy remote monitoring tools without any authorization over the network using a HTTP request which refers to files using ../../ relative paths. Once the internal password file is retrieved, the password hash can be identified using a brute force attack. There is also an exploit allowing running of commands after authorization.

FDSK Leak in ABB, Busch-Jaeger, FTS Display (version 1.00) and BCU (version 1.3.0.33) allows attacker to take control via access to local KNX Bus-System

For ABB products ABB Ability™ System 800xA and related system extensions versions 5.1, 6.0 and 6.1, Compact HMI versions 5.1 and 6.0, Control Builder Safe 1.0, 1.1 and 2.0, Symphony Plus -S+ Operations 3.0 to 3.2 Symphony Plus -S+ Engineering 1.1 to 2.2, Composer Harmony 5.1, 6.0 and 6.1, Melody Composer 5.3, 6.1/6.2 and SPE for Melody 1.0SPx (Composer 6.3), Harmony OPC Server (HAOPC) Standalone 6.0, 6.1 and 7.0, ABB Ability™ System 800xA/ Advant® OCS Control Builder A 1.3 and 1.4, Advant® OCS AC100 OPC Server 5.1, 6.0 and 6.1, Composer CTK 6.1 and 6.2, AdvaBuild 3.7 SP1 and SP2, OPCServer for MOD 300 (non-800xA) 1.4, OPC Data Link 2.1 and 2.2, Knowledge Manager 8.0, 9.0 and 9.1, Manufacturing Operations Management 1812 and 1909, confidential data is written in an unprotected file. An attacker who successfully exploited this vulnerability could take full control of the computer.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in ABB Flow-X firmware on Flow-X embedded hardware (web service modules) allows Footprinting.This issue affects Flow-X: before 4.0.

ABB PCM600 before 2.7 improperly stores the main application password after a password change, which allows local users to obtain sensitive information via unspecified vectors.

The vulnerability origins in the commissioning process where an attacker of the ControlTouch can enter a serial number in a specific way to transfer the device virtually into her/his my.busch-jaeger.de or mybuildings.abb.com profile. A successful attacker can observe and control a ControlTouch remotely under very specific circumstances. The issue is fixed in the cloud side of the system. No firmware update is needed for customer products. If a user wants to understand if (s)he is affected, please read the advisory. This issue affects: ABB and Busch-Jaeger, ControlTouch

The vulnerability allows a successful attacker to bypass the integrity check of FW uploaded to the free@home System Access Point.

The web portal interface in Citrix Access Gateway (aka Citrix Advanced Access Control) before Advanced Edition 4.5 HF1 places a session ID in the URL, which allows context-dependent attackers to hijack sessions by reading "residual information", including the a referer log, browser history, or browser cache.

A Disclosure of Sensitive Information vulnerability in HPE SiteScope version v11.2x, v11.3x was found.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects EAX80 before 1.0.1.62, EX7000 before 1.0.1.104, R6120 before 1.0.0.76, R6220 before 1.1.0.110, R6230 before 1.1.0.110, R6260 before 1.1.0.78, R6850 before 1.1.0.78, R6350 before 1.1.0.78, R6330 before 1.1.0.78, R6800 before 1.2.0.76, R6900v2 before 1.2.0.76, R6700v2 before 1.2.0.76, R7000 before 1.0.11.116, R6900P before 1.3.3.140, R7000P before 1.3.3.140, R7200 before 1.2.0.76, R7350 before 1.2.0.76, R7400 before 1.2.0.76, R7450 before 1.2.0.76, AC2100 before 1.2.0.76, AC2400 before 1.2.0.76, AC2600 before 1.2.0.76, R7900 before 1.0.4.38, R7960P before 1.4.1.66, R8000 before 1.0.4.68, R7900P before 1.4.1.66, R8000P before 1.4.1.66, RAX15 before 1.0.2.82, RAX20 before 1.0.2.82, RAX200 before 1.0.3.106, RAX45 before 1.0.2.72, RAX50 before 1.0.2.72, RAX75 before 1.0.3.106, and RAX80 before 1.0.3.106.

CA Identity Manager r12.6 to r12.6 SP8, 14.0, and 14.1 allows remote attackers to potentially identify passwords of locked accounts through an exhaustive search.

IBM Flex System Manager (FSM) 1.1 through 1.3 before 1.3.2.0 allows remote attackers to enumerate user accounts via unspecified vectors.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects R7000 before 1.0.11.110, R7900 before 1.0.4.30, R8000 before 1.0.4.62, RS400 before 1.5.1.80, R6400v2 before 1.0.4.102, R7000P before 1.3.2.126, R6700v3 before 1.0.4.102, and R6900P before 1.3.2.126.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to compute password-of-the-day values via unspecified vectors.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not include the HTTPOnly flag in a Set-Cookie header for administration applications, which makes it easier for remote attackers to obtain potentially sensitive information via script access to cookies.

Microsoft SQL Server Analysis Services in Microsoft SQL Server 2012, Microsoft SQL Server 2014, and Microsoft SQL Server 2016 allows an information disclosure vulnerability when it improperly enforces permissions, aka "Microsoft SQL Server Analysis Services Information Disclosure Vulnerability".

The login function in Softaculous Webuzo before 2.1.4 provides different error messages for invalid authentication attempts depending on whether the user account exists, which allows remote attackers to enumerate usernames via a series of requests.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST) and DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST) devices allows remote attackers to discover a CM MAC address by sniffing Wi-Fi traffic and performing simple arithmetic calculations.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not set the secure flag for cookies in an https session to an administration application, which makes it easier for remote attackers to capture these cookies by intercepting their transmission within an http session.

IDM 4.6 Identity Applications prior to 4.6.2.1 may expose sensitive information.

Emerson Dixell XWEB-500 products are affected by information disclosure via directory listing. A potential attacker can use this misconfiguration to access all the files in the remote directories. Note: the product has not been supported since 2018 and should be removed or replaced

The Google News and Weather application before 3.3.1 for Android allows remote attackers to read OAuth tokens by sniffing the network and leveraging the lack of SSL.

A Remote Disclosure of Information vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P2 was found.

Karotz API 12.07.19.00: Session Token Information Disclosure

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects RBK50 before 2.7.3.22, RBR50 before 2.7.3.22, and RBS50 before 2.7.3.22.

Limited plaintext disclosure exists in PRIMX Zed Entreprise for Windows before 6.1.2240, Zed Entreprise for Windows (ANSSI qualification submission) before 6.1.2150, Zed Entreprise for Mac before 2.0.199, Zed Entreprise for Linux before 2.0.199, Zed Pro for Windows before 1.0.195, Zed Pro for Mac before 1.0.199, Zed Pro for Linux before 1.0.199, Zed Free for Windows before 1.0.195, Zed Free for Mac before 1.0.199, and Zed Free for Linux before 1.0.199. Analyzing a Zed container can lead to the disclosure of plaintext content of very small files (a few bytes) stored into it.

NETGEAR R7000 devices before 1.0.11.116 are affected by disclosure of sensitive information.

Some NetIQ Identity Manager Applications before Identity Manager 4.5.6.1 included the session token in GET URLs, potentially allowing exposure of user sessions to untrusted third parties via proxies, referer urls or similar.

A remote unauthenticated disclosure of information vulnerability in HPE Matrix Operating Environment version 7.6 LR1 was found.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects RBK352 before 4.4.0.10, RBR350 before 4.4.0.10, and RBS350 before 4.4.0.10.

An information disclosure vulnerability in the BlackBerry Workspaces Server could result in an attacker gaining access to source code for server-side applications by crafting a request for specific files.

An information-leakage issue was discovered on Mimosa Client Radios before 2.2.3 and Mimosa Backhaul Radios before 2.2.3. There is a page in the web interface that will show you the device's serial number, regardless of whether or not you have logged in. This information-leakage issue is relevant because there is another page (accessible without any authentication) that allows you to remotely factory reset the device simply by entering the serial number.

Debug information disclosure exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. A direct request to cgi-bin/HASync/hasync.cgi?debug=1 shows Master LAN Address, Serial Number, HA Group ID, Virtual IP, and Submitted syncid.

In Cloud Foundry Foundation CAPI-release versions after v1.6.0 and prior to v1.38.0 and cf-release versions after v244 and prior to v270, there is an incomplete fix for CVE-2017-8035. If you took steps to remediate CVE-2017-8035 you should also upgrade to fix this CVE. A carefully crafted CAPI request from a Space Developer can allow them to gain access to files on the Cloud Controller VM for that installation, aka an Information Leak / Disclosure.

QNAP QTS 4.2.6 build 20171026, QTS 4.3.3 build 20170727 and earlier allows remote attackers to obtain potentially sensitive information (firmware version and running services) via a request to sysinfoReq.cgi.

Same-origin policy protections can be bypassed on pages with embedded iframes during page reloads, allowing the iframes to access content on the top level page, leading to information disclosure. This vulnerability affects Thunderbird < 52.3, Firefox ESR < 52.3, and Firefox < 55.

In Joomla! 3.4.0 through 3.6.5 (fixed in 3.7.0), multiple files caused full path disclosures on systems with enabled error reporting.

NetApp OnCommand Unified Manager Core Package 5.x before 5.2.2P1 might allow remote attackers to obtain sensitive information via vectors involving error messages.

QNAP Qfinder Pro 6.1.0.0317 and earlier may expose sensitive information contained in NAS devices. If exploited, this may allow attackers to further compromise the device.

Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects RAX35 before 1.0.4.102, RAX38 before 1.0.4.102, and RAX40 before 1.0.4.102.

Certain NETGEAR devices are affected by disclosure of sensitive information. This affects RBK352 before 4.4.0.10, RBR350 before 4.4.0.10, and RBS350 before 4.4.0.10.

Schneider Electric Modicon TM221CE16R 1.3.3.3 devices allow remote attackers to discover the application-protection password via a \x00\x01\x00\x00\x00\x05\x01\x5a\x00\x03\x00 request to the Modbus port (502/tcp). Subsequently the application may be arbitrarily downloaded, modified, and uploaded.

Atlassian Confluence 6.x before 6.0.7 allows remote attackers to bypass authentication and read any blog or page via the drafts diff REST resource.

It was found that some selectivity estimation functions in PostgreSQL before 9.2.21, 9.3.x before 9.3.17, 9.4.x before 9.4.12, 9.5.x before 9.5.7, and 9.6.x before 9.6.3 did not check user privileges before providing information from pg_statistic, possibly leaking information. An unprivileged attacker could use this flaw to steal some information from tables they are otherwise not allowed to access.

RiskNet Acquirer before hotfix 6.0 b7+ADHOC-443 ApplicationServiceBean contains a service information disclosure.

Information exposure through the directory listing in npm's harp module allows to access files that are supposed to be ignored according to the harp server rules.Vulnerable versions are <= 0.29.0 and no fix was applied to our knowledge.

An issue was discovered in the Cloud Controller API in Cloud Foundry Foundation CAPI-release versions after v1.6.0 and prior to v1.35.0 and cf-release versions after v244 and prior to v268. A carefully crafted CAPI request from a Space Developer can allow them to gain access to files on the Cloud Controller VM for that installation.