Buffer overflow in the browser kernel in Google Chrome before 2.0.172.33 allows remote HTTP servers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted response.

Memory corruption in Audio during playback session with audio effects enabled.

In Android before 2018-04-05 or earlier security patch level on Qualcomm Snapdragon Mobile SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 450, SD 615/16/SD 415, SD 617, SD 625, SD 650/52, SD 808, SD 810, SD 820, SD 835, SD 845, SDM630, SDM636, SDM660, SDX20, and Snapdragon_High_Med_2016, the 'proper' solution for this will be to ensure that any users of qsee_log in the bootchain (before Linux boots) unallocate their buffers and clear the qsee_log pointer. Until support for that is implemented in TZ and the bootloader, enable tz_log to avoid potential scribbling. This solution will prevent the linux kernel memory corruption.

In all Qualcomm products with Android releases from CAF using the Linux kernel, sSL handshake failure with ClientHello rejection results in memory leak.

In keyinstall, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07550104; Issue ID: ALPS07550104.

In Android before 2018-04-05 or earlier security patch level on Qualcomm Snapdragon Mobile and Snapdragon Wear MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8909W, SD 210/SD 212/SD 205, SD 400, SD 410/12, SD 425, SD 430, SD 450, SD 615/16/SD 415, SD 617, SD 625, SD 650/52, SD 800, SD 808, SD 810, SD 820, SD 835, SD 845, SD 850, and SDX20, a simultaneous command post for addSA or updateSA on same SA leads to memory corruption. APIs addSA and updateSA APIs access the global variable ipsec_sa_list[] outside of mutex protection.

Out of bounds memory access in V8 in Google Chrome prior to 123.0.6312.105 allowed a remote attacker to perform arbitrary read/write via a crafted HTML page. (Chromium security severity: High)

Adobe Flash Player versions 25.0.0.171 and earlier have an exploitable memory corruption vulnerability in the PNG image parser. Successful exploitation could lead to arbitrary code execution.

Heap-based buffer overflow in the ParamTraits<SkBitmap>::Read function in Google Chrome before 1.0.154.64 allows attackers to leverage renderer access to cause a denial of service (application crash) or possibly execute arbitrary code via vectors related to a large bitmap that arrives over the IPC channel.

Adobe Flash Player before 13.0.0.244 and 14.x and 15.x before 15.0.0.152 on Windows and OS X and before 11.2.202.406 on Linux, Adobe AIR before 15.0.0.249 on Windows and OS X and before 15.0.0.252 on Android, Adobe AIR SDK before 15.0.0.249, and Adobe AIR SDK & Compiler before 15.0.0.249 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2014-0547, CVE-2014-0550, CVE-2014-0551, CVE-2014-0552, and CVE-2014-0555.

post_proc/volume_listener.c in mediaserver in Android 6.x before 2016-04-01 mishandles deleted effect context, which allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted media file, aka internal bug 25753245.

In Tensorflow version 2.3.0, the `SparseCountSparseOutput` and `RaggedCountSparseOutput` implementations don't validate that the `weights` tensor has the same shape as the data. The check exists for `DenseCountSparseOutput`, where both tensors are fully specified. In the sparse and ragged count weights are still accessed in parallel with the data. But, since there is no validation, a user passing fewer weights than the values for the tensors can generate a read from outside the bounds of the heap buffer allocated for the weights. The issue is patched in commit 3cbb917b4714766030b28eba9fb41bb97ce9ee02 and is released in TensorFlow version 2.3.1.

An issue was discovered on Samsung mobile devices with P(9.0) and Q(10.0) (Exynos 7885 chipsets) software. The Bluetooth Low Energy (BLE) component has a buffer overflow with a resultant deadlock or crash. The Samsung ID is SVE-2020-16870 (July 2020).

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing the QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE vendor command, in which attribute QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE contains fewer than 1 byte, a buffer overrun occurs.

In Tensorflow before version 2.4.0, when the `boxes` argument of `tf.image.crop_and_resize` has a very large value, the CPU kernel implementation receives it as a C++ `nan` floating point value. Attempting to operate on this is undefined behavior which later produces a segmentation fault. The issue is patched in eccb7ec454e6617738554a255d77f08e60ee0808 and TensorFlow 2.4.0 will be released containing the patch. TensorFlow nightly packages after this commit will also have the issue resolved.

Stack-based buffer overflow in chrome/common/gfx/url_elider.cc in Google Chrome 0.2.149.27 and other versions before 0.2.149.29 might allow user-assisted remote attackers to execute arbitrary code via a link target (href attribute) with a large number of path elements, which triggers the overflow when the status bar is updated after the user hovers over the link.

An issue was discovered on Samsung mobile devices with Q(10.0) software. Attackers can trigger an out-of-bounds access and device reset via a 4K wallpaper image because ImageProcessHelper mishandles boundary checks. The Samsung ID is SVE-2020-18056 (July 2020).

In Tensorflow before version 2.3.1, the `SparseCountSparseOutput` implementation does not validate that the input arguments form a valid sparse tensor. In particular, there is no validation that the `indices` tensor has the same shape as the `values` one. The values in these tensors are always accessed in parallel. Thus, a shape mismatch can result in accesses outside the bounds of heap allocated buffers. The issue is patched in commit 3cbb917b4714766030b28eba9fb41bb97ce9ee02 and is released in TensorFlow version 2.3.1.

In TensorFlow Lite before versions 2.2.1 and 2.3.1, models using segment sum can trigger a denial of service by causing an out of memory allocation in the implementation of segment sum. Since code uses the last element of the tensor holding them to determine the dimensionality of output tensor, attackers can use a very large value to trigger a large allocation. The issue is patched in commit 204945b19e44b57906c9344c0d00120eeeae178a and is released in TensorFlow versions 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to limit the maximum value in the segment ids tensor. This only handles the case when the segment ids are stored statically in the model, but a similar validation could be done if the segment ids are generated at runtime, between inference steps. However, if the segment ids are generated as outputs of a tensor during inference steps, then there are no possible workaround and users are advised to upgrade to patched code.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the implementation of `SparseFillEmptyRowsGrad` uses a double indexing pattern. It is possible for `reverse_index_map(i)` to be an index outside of bounds of `grad_values`, thus resulting in a heap buffer overflow. The issue is patched in commit 390611e0d45c5793c7066110af37c8514e6a6c54, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

In wcn service, there is a possible missing params check. This could lead to local denial of service in wcn service.

The VideoFramePool::PoolImpl::CreateFrame function in media/base/video_frame_pool.cc in Google Chrome before 47.0.2526.73 does not initialize memory for a video-frame data structure, which might allow remote attackers to cause a denial of service (out-of-bounds memory access) or possibly have unspecified other impact by leveraging improper interaction with the vp3_h_loop_filter_c function in libavcodec/vp3dsp.c in FFmpeg.

In all Qualcomm products with Android releases from CAF using the Linux kernel, a buffer overflow vulnerability exists in an Inter-RAT procedure.

In Android before 2018-04-05 or earlier security patch level on Qualcomm Snapdragon Automobile, Snapdragon Mobile, and Snapdragon Wear MDM9206, MDM9650, MSM8909W, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 430, SD 450, SD 615/16/SD 415, SD 617, SD 625, SD 650/52, SD 808, SD 810, SD 820, SD 820A, SD 835, SD 845, and SD 850, if OEMCrypto_Dash_InstallEncapKeybox() is called with keyBoxLength set to a value higher than TZ_WV_MAX_DATA_LEN (20k), a buffer over-read occurs.

In spipe drive, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with System execution privileges needed.

In the function wma_unified_power_debug_stats_event_handler() in Android for MSM, Firefox OS for MSM, and QRD Android before 2017-10-18, if the value param_buf->num_debug_register received from the FW command buffer is close to max of uint32, then the computation performed using this variable to calculate stats_registers_len may overflow to a smaller value leading to less than required memory allocated for power_stats_results and potentially a buffer overflow while copying the FW buffer to local buffer.

In Android before 2018-04-05 or earlier security patch level on Qualcomm Snapdragon Automobile, Snapdragon Mobile, and Snapdragon Wear MDM9206, MDM9650, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 430, SD 450, SD 600, SD 615/16/SD 415, SD 617, SD 625, SD 650/52, SD 800, SD 808, SD 810, SD 820, SD 820A, SD 835, SD 845, and SD 850, in Secure DEMUX command handler, when parameter validation fails, an error code is written into a response buffer without checking that response buffer length, passed from HLOS, which may result in memory corruption.

In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, in wma_vdev_start_resp_handler(), vdev id is received from firmware as part of WMI_VDEV_START_RESP_EVENTID. This vdev id can be greater than max bssid stored in wma handle and this would result in buffer overwrite while accessing wma_handle->interfaces[vdev_id].

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing the QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE vendor command, in which attribute QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE contains fewer than 1 byte, a buffer overrun occurs.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, by calling an IPA ioctl and searching for routing/filer/hdr rule handle from ipa_idr pointer using ipa_idr_find() function, the wrong structure pointer can be returned resulting in a slab out of bound access in the IPA driver.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the processing of messages of type eWNI_SME_MODIFY_ADDITIONAL_IES, an integer overflow leading to heap buffer overflow may potentially occur.

A drm driver have oob problem, could cause the system crash or EOPProduct: AndroidVersions: Android SoCAndroid ID: A-233124709

In the handler for the ioctl command VIDIOC_MSM_ISP_DUAL_HW_LPM_MODE in Android for MSM, Firefox OS for MSM, and QRD Android before 2017-05-23, a heap overread vulnerability exists.

In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, in the processing of an SWBA event, the vdev_map value is not properly validated leading to a potential buffer overwrite in function wma_send_bcn_buf_ll().

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the pp_pgc_get_config() graphics driver function, a kernel memory overwrite can potentially occur.

In all android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the linux kernel, Userspace can pass IEs to the host driver and if multiple append commands are received, then the integer variable that stores the length can overflow and the subsequent copy of the IE data may potentially lead to a heap buffer overflow.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while handling the QSEOS_RPMB_CHECK_PROV_STATUS_COMMAND, a userspace buffer is directly accessed in kernel space.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, there is a memory allocation without a length field validation in the mobicore driver which can result in an undersize buffer allocation. Ultimately this can result in a kernel memory overwrite.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing the QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE_DECR_DB vendor command, in which attribute QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_DECR_DB contains fewer than 1 byte, a buffer overrun occurs.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, while processing the QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI vendor command, in which attribute QCA_WLAN_VENDOR_ATTR_MAC_ADDR contains fewer than 6 bytes, a buffer overrun occurs.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, buffer sizes in the message passing interface are not properly validated.

In receive_packet of libnetutils/packet.c, there is a possible out-of-bounds write due to a missing bounds check on the DHCP response. This could lead to remote code execution as a privileged process with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-67474440.

In avrc_pars_vendor_cmd of avrc_pars_tg.cc, there is a possible stack corruption due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-69479009.

In several functions of libhevc, NEON registers are not preserved. This could lead to remote code execution as a privileged process with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-68320413.

In Android before 2018-04-05 or earlier security patch level on Qualcomm Snapdragon Mobile MSM8974, lack of length checking in OEMCrypto_DeriveKeysFromSessionKey() could lead to a buffer overflow vulnerability.

In avrc_ctrl_pars_vendor_rsp of avrc_pars_ct.cc, there is a possible stack buffer overflow due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-71603315.

In avrc_pars_vendor_cmd of avrc_pars_tg.cc, there is a possible stack corruption due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-69478941.

In CProgramConfig_ReadHeightExt of tpdec_asc.cpp, there is a possible stack buffer overflow due to a missing bounds check. This could lead to a remote code execution with no additional execution privileges needed. User interaction is needed for exploitation. Product: Android. Versions: 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-70637599.

In all Qualcomm products with Android releases from CAF using the Linux kernel, in audio_aio_ion_lookup_vaddr, the buffer length, which is user input, ends up being used to validate if the buffer is fully within the valid region. If the buffer length is large enough then the address + length operation could overflow and produce a result far below the valid region.