Advantech WebAccess HMI Designer, Versions 2.1.9.31 and prior. A double free vulnerability caused by processing specially crafted project files may allow remote code execution, disclosure/modification of information, or cause the application to crash.

NetComm Wireless G LTE Light Industrial M2M Router (NWL-25) with firmware 2.0.29.11 and prior. A cross-site request forgery condition can occur, allowing an attacker to change passwords of the device remotely.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the NodeName2 parameter.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the projectname parameter.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the password parameter.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the AccessCode parameter.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the GotoCmd parameter.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the AccessCode2 parameter.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the NodeName parameter.

In Advantech WebAccess HMI Designer Version 2.1.9.23 and prior, processing specially crafted MCR files lacking proper validation of user supplied data may cause the system to write outside the intended buffer area, allowing remote code execution.

Advantech WebAccess 8.1 and earlier contains a DLL hijacking vulnerability which may allow an attacker to run a malicious DLL file within the search path resulting in execution of arbitrary code.

A heap-based buffer overflow issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. Researchers have identified multiple vulnerabilities where there is a lack of proper validation of the length of user-supplied data prior to copying it to the heap-based buffer, which could allow an attacker to execute arbitrary code under the context of the process.

WPLSoft in Delta Electronics versions 2.45.0 and prior utilizes a fixed length heap buffer where a value larger than the buffer can be read from a file into the buffer, causing the buffer to be overwritten, which may allow remote code execution or cause the application to crash.

The affected product is vulnerable to memory corruption condition due to lack of proper validation of user supplied files, which may allow an attacker to execute arbitrary code. User interaction is required on the WebAccess HMI Designer (versions 2.1.9.95 and prior).

A Stack-based Buffer Overflow issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. The application lacks proper validation of the length of user-supplied data prior to copying it to a stack-based buffer, which could allow an attacker to execute arbitrary code under the context of the process.

Cross-site request forgery (CSRF) vulnerability in Advantech WebAccess before 8.1 allows remote attackers to hijack the authentication of unspecified victims via unknown vectors.

Advantech WebAccess HMI Designer, Versions 2.1.9.31 and prior. Multiple heap-based buffer overflow vulnerabilities may be exploited by opening specially crafted project files that may overflow the heap, which may allow remote code execution, disclosure/modification of information, or cause the application to crash.

Advantech WebAccess HMI Designer, Versions 2.1.9.31 and prior. Processing specially crafted project files lacking proper validation of user supplied data may cause the system to write outside the intended buffer area, which may allow remote code execution, disclosure/modification of information, or cause the application to crash.

Advantech WebAccess HMI Designer, Versions 2.1.9.31 and prior. Processing specially crafted project files lacking proper validation of user supplied data may cause a type confusion condition, which may allow remote code execution, disclosure/modification of information, or cause the application to crash.

In ABB IP GATEWAY 3.39 and prior, the web server does not sufficiently verify that a request was performed by the authenticated user, which may allow an attacker to launch a request impersonating that user.

Cscape, 9.80 SP4 and prior. An improper input validation vulnerability may be exploited by processing specially crafted POC files. This may allow an attacker to read confidential information and remotely execute arbitrary code.

Multiple stack-based buffer overflow vulnerabilities in WECON LeviStudioU version 1.8.56 and prior may be exploited when parsing strings within project files. The process does not properly validate the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage these vulnerabilities to execute code under the context of the current process. Mat Powell, Ziad Badawi, and Natnael Samson working with Trend Micro's Zero Day Initiative, reported these vulnerabilities to NCCIC.

Cross-site request forgery has been identified in Moxa IKS and EDS, which may allow for the execution of unauthorized actions on the device.

A memory corruption vulnerability has been identified in WECON LeviStudioU version 1.8.56 and prior, which may allow arbitrary code execution. Mat Powell, Ziad Badawi, and Natnael Samson working with Trend Micro's Zero Day Initiative, reported these vulnerabilities to NCCIC.

Stack-based buffer overflow in Advantech WebAccess (formerly BroadWin WebAccess) 7.2 allows remote attackers to execute arbitrary code via the UserName parameter.

In WebAccess/SCADA Versions 8.3.5 and prior, multiple out-of-bounds write vulnerabilities are caused by a lack of proper validation of the length of user-supplied data. Exploitation of these vulnerabilities may allow remote code execution.

Heap-based buffer overflow vulnerabilities in Advantech WebAccess HMI Designer 2.1.7.32 and prior caused by processing specially crafted .pm3 files may allow remote code execution.

Processing specially crafted .pm3 files in Advantech WebAccess HMI Designer 2.1.7.32 and prior may cause the system to write outside the intended buffer area and may allow remote code execution.

WPLSoft in Delta Electronics versions 2.45.0 and prior writes data from a file outside the bounds of the intended buffer space, which could cause memory corruption or may allow remote code execution.

WPLSoft in Delta Electronics versions 2.45.0 and prior utilizes a fixed length stack buffer where a value larger than the buffer can be read from a file into the buffer, causing the buffer to be overwritten, which may allow remote code execution or cause the application to crash.

LCDS Laquis SCADA prior to version 4.1.0.4150 allows taking in user input without proper sanitation, which may allow an attacker to execute remote code on the server.

A type confusion vulnerability exists when processing project files in CX-Supervisor (Versions 3.42 and prior). An attacker could use a specially crafted project file to exploit and execute code under the privileges of the application.

The TextEditor 2.0 in ABB CP400 Panel Builder versions 2.0.7.05 and earlier contain a vulnerability in the file parser of the Text Editor wherein the application doesn't properly prevent the insertion of specially crafted files which could allow arbitrary code execution.

Several use after free vulnerabilities have been identified in CX-Supervisor (Versions 3.42 and prior). When processing project files, the application fails to check if it is referencing freed memory. An attacker could use a specially crafted project file to exploit and execute code under the privileges of the application.

CX-Supervisor (Versions 3.42 and prior) can execute code that has been injected into a project file. An attacker could exploit this to execute code under the privileges of the application.

WebAccess Versions 8.3.2 and prior. The application fails to properly validate the length of user-supplied data, causing a buffer overflow condition that allows for arbitrary remote code execution.

An Uncontrolled Search Path Element issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. A maliciously crafted dll file placed earlier in the search path may allow an attacker to execute code within the context of the application.

An Externally Controlled Format String issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. String format specifiers based on user provided input are not properly validated, which could allow an attacker to execute arbitrary code.

Parsing a maliciously crafted project file may cause a heap-based buffer overflow, which may allow an attacker to perform arbitrary code execution. User interaction is required on the WebAccess HMI Designer (versions 2.1.9.95 and prior).

Opening a maliciously crafted project file may cause an out-of-bounds write, which may allow an attacker to execute arbitrary code. User interaction is require on the WebAccess HMI Designer (versions 2.1.9.95 and prior).

In Omron CX-Supervisor Versions 3.30 and prior, parsing malformed project files may cause a double free vulnerability.

PackLinuxElf64::unpack in p_lx_elf.cpp in UPX 3.95 allows remote attackers to cause a denial of service (double free), limit the ability of a malware scanner to operate on the entire original data, or possibly have unspecified other impact via a crafted file.

Das U-Boot versions 2019.07-rc1 through 2019.07-rc4 can double-free a cached block of data when listing files in a crafted ext4 filesystem.

Adobe Acrobat and Reader versions 2018.011.20063 and earlier, 2017.011.30102 and earlier, and 2015.006.30452 and earlier have a double free vulnerability. Successful exploitation could lead to arbitrary code execution.

Dave Gamble cJSON version 1.7.2 and earlier contains a CWE-415: Double Free vulnerability in cJSON library that can result in Possible crash or RCE. This attack appear to be exploitable via Attacker must be able to force victim to print JSON data, depending on how cJSON library is used this could be either local or over a network. This vulnerability appears to have been fixed in 1.7.3.

Libgd version 2.2.5 contains a Double Free Vulnerability vulnerability in gdImageBmpPtr Function that can result in Remote Code Execution . This attack appear to be exploitable via Specially Crafted Jpeg Image can trigger double free. This vulnerability appears to have been fixed in after commit ac16bdf2d41724b5a65255d4c28fb0ec46bc42f5.

The soundtrigger driver in P9 Plus smart phones with software versions earlier than VIE-AL10BC00B353 has a memory double free vulnerability. An attacker tricks a user into installing a malicious application, and the application can start multiple threads and try to free specific memory, which could triggers double free and causes a system crash or arbitrary code execution.

In all Android releases from CAF using the Linux kernel, a double free vulnerability exists in a display driver.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley MicroStation CONNECT 10.16.0.80. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of JT files. The issue results from the lack of validating the existence of an object prior to performing further free operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-15415.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Bentley View 10.15.0.75. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of JT files. The issue results from the lack of validating the existence of an object prior to performing further free operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-15455.