pmmasterd in Quest Privilege Manager before 6.0.0.061, when configured as a policy server, allows remote attackers to write to arbitrary files and consequently execute arbitrary code with root privileges via an ACT_NEWFILESENT action.

Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 4 of 6).

Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 3 of 6).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 21 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 5 of 6).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 9 of 46).

The '/common/ajax_email_connection_test.php' script in the Quest KACE System Management Appliance 8.0.318 is accessible by any authenticated user and can be abused to execute arbitrary commands on the system. This script is vulnerable to command injection via the unsanitized user input 'TEST_SERVER' sent to the script via the POST method.

Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 6 of 6).

Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 1 of 6).

In order to perform actions that require higher privileges, the Quest KACE System Management Appliance 8.0.318 relies on a message queue that runs daemonized with root privileges and only allows a set of commands to be executed. A command injection vulnerability exists within this message queue which allows low-privilege users to append arbitrary commands that will be run as root.

In order to perform actions that requires higher privileges, the Quest KACE System Management Appliance 8.0.318 relies on a message queue managed that runs with root privileges and only allows a set of commands. One of the available commands allows changing any user's password (including root). A low-privilege user could abuse this feature by changing the password of the 'kace_support' account, which comes disabled by default but has full sudo privileges.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 42 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 2 of 6).

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Quest NetVault Backup 11.2.0.13. Authentication is not required to exploit this vulnerability. The specific flaw exists within nvwsworker.exe. When parsing the boundary header of a multipart request, the process does not properly validate the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code under the context of SYSTEM. Was ZDI-CAN-4215.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P4 was found.

NetIQ Identity Manager before 4.5.6.1 allowed uploading files with double extensions or non-image content in the Themes handling of the User Application Administration, allowing malicious user administrators to potentially execute code or mislead users.

The EMC RSA Identity Governance and Lifecycle, RSA Via Lifecycle and Governance and RSA IMG products (RSA Identity Governance and Lifecycle versions 7.0.1, 7.0.2, all patch levels; RSA Via Lifecycle and Governance version 7.0, all patch levels; RSA Identity Management and Governance (RSA IMG) versions 6.9.1, all patch levels) allow an application administrator to upload arbitrary files that may potentially contain a malicious code. The malicious file could be then executed on the affected system with the privileges of the user the application is running under.

An authenticated user of Unitrends Enterprise Backup before 9.1.2 can execute arbitrary OS commands by sending a specially crafted filename to the /api/restore/download-files endpoint, related to the downloadFiles function in api/includes/restore.php.

SquirrelMail 1.4.22 (and other versions before 20170427_0200-SVN) allows post-authentication remote code execution via a sendmail.cf file that is mishandled in a popen call. It's possible to exploit this vulnerability to execute arbitrary shell commands on the remote server. The problem is in the Deliver_SendMail.class.php with the initStream function that uses escapeshellcmd() to sanitize the sendmail command before executing it. The use of escapeshellcmd() is not correct in this case since it doesn't escape whitespaces, allowing the injection of arbitrary command parameters. The problem is in -f$envelopefrom within the sendmail command line. Hence, if the target server uses sendmail and SquirrelMail is configured to use it as a command-line program, it's possible to trick sendmail into using an attacker-provided configuration file that triggers the execution of an arbitrary command. For exploitation, the attacker must upload a sendmail.cf file as an email attachment, and inject the sendmail.cf filename with the -C option within the "Options > Personal Informations > Email Address" setting.

A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235.

A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.

A Remote Arbitrary Code Execution vulnerability in HPE Intelligent Management Center (IMC) PLAT version 7.2 E0403P06 was found.

A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069.

vpn-user-portal (aka eduVPN or Let's Connect!) before 2.3.14, as packaged for Debian 10, Debian 11, and Fedora, allows remote authenticated users to obtain OS filesystem access, because of the interaction of QR codes with an exec that uses the -r option. This can be leveraged to obtain additional VPN access.

A vulnerability in the REST API for software device management in Cisco Application Policy Infrastructure Controller (APIC) Software could allow an authenticated, remote attacker to escalate privileges to root on an affected device. The vulnerability is due to incomplete validation and error checking for the file path when specific software is uploaded. An attacker could exploit this vulnerability by uploading malicious software using the REST API. A successful exploit could allow an attacker to escalate their privilege level to root. The attacker would need to have the administrator role on the device.

A security-check flaw was found in the way the Heketi 5 server API handled user requests. An authenticated Heketi user could send specially crafted requests to the Heketi server, resulting in remote command execution as the user running Heketi server and possibly privilege escalation.

A vulnerability in Sierra Wireless AirLink GX400, GX440, ES440, and LS300 routers with firmware before 4.4.5 and GX450, ES450, RV50, RV50X, MP70, and MP70E routers with firmware before 4.9 could allow an authenticated remote attacker to execute arbitrary code and gain full control of an affected system, including issuing commands with root privileges. This vulnerability is due to insufficient input validation on user-controlled input in an HTTP request to the targeted device. An attacker in possession of router login credentials could exploit this vulnerability by sending a crafted HTTP request to an affected system.

The network proxy page on the web portal for the Zoom On-Premise Meeting Connector Controller before version 4.6.365.20210703, Zoom On-Premise Meeting Connector MMR before version 4.6.365.20210703, Zoom On-Premise Recording Connector before version 3.8.45.20210703, Zoom On-Premise Virtual Room Connector before version 4.4.6868.20210703, and Zoom On-Premise Virtual Room Connector Load Balancer before version 2.5.5496.20210703 fails to validate input sent in requests to set the network proxy password. This could lead to remote command injection by a web portal administrator.

An Improper Input Validation vulnerability in J-Web of Juniper Networks Junos OS allows a locally authenticated J-Web attacker to escalate their privileges to root over the target device. This issue affects: Juniper Networks Junos OS All versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R3-S3; 19.3 versions prior to 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2;

A vulnerability in the software update feature of Cisco Industrial Network Director could allow an authenticated, remote attacker to execute arbitrary code. The vulnerability is due to improper validation of files uploaded to the affected application. An attacker could exploit this vulnerability by authenticating to the affected system using administrator privileges and uploading an arbitrary file. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges.

manager.c in the Manager Interface in Asterisk Open Source 1.4.x before 1.4.40.1, 1.6.1.x before 1.6.1.25, 1.6.2.x before 1.6.2.17.3, and 1.8.x before 1.8.3.3 and Asterisk Business Edition C.x.x before C.3.6.4 does not properly check for the system privilege, which allows remote authenticated users to execute arbitrary commands via an Originate action that has an Async header in conjunction with an Application header.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

ServerAdmin/TestTelnetConnection.jsp in DS3 Authentication Server allows remote authenticated users to execute arbitrary commands via shell metacharacters in the HOST_NAME field.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

The email function in manage_sql.c in OpenVAS Manager 1.0.x through 1.0.3 and 2.0.x through 2.0rc2 allows remote authenticated users to execute arbitrary commands via the (1) To or (2) From e-mail address in an OMP request to the Greenbone Security Assistant (GSA).

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A remote code execution vulnerability in HPE intelligent Management Center (iMC) PLAT iMC Plat 7.3 E0504P2 and earlier was found.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.