An XSS issue has been found with rd.cgi in Pulse Secure Pulse Connect Secure 8.3RX before 8.3R3 due to improper header sanitization. This is not applicable to 8.1RX.

A vulnerability in Pulse Connect Secure before 9.1R12 could allow a threat actor to perform a cross-site script attack against an authenticated administrator via an unsanitized web parameter.

An XSS issue was found with Psaldownload.cgi in Pulse Secure Pulse Connect Secure (PCS) 8.3R2 before 8.3R2 and Pulse Policy Secure (PPS) 5.4RX before 5.4R2. This is not applicable to PCS 8.1RX or PPS 5.2RX.

Reflected XSS in Ivanti Connect Secure before version 22.7R2.1 and Ivanti Policy Secure before version 22.7R1.1 allows a remote unauthenticated attacker to obtain admin privileges. User interaction is required.

A vulnerability in the Pulse Connect Secure / Pulse Policy Secure below 9.1R9 could allow attackers to conduct Cross-Site Scripting (XSS) and Open Redirection for authenticated user web interface.

A vulnerability in the authenticated user web interface of Pulse Connect Secure and Pulse Policy Secure < 9.1R8.2 could allow attackers to conduct Cross-Site Scripting (XSS).

Pulse Connect Secure 8.3R1 has Reflected XSS in launchHelp.cgi. The helpLaunchPage parameter is reflected in an IFRAME element, if the value contains two quotes. It properly sanitizes quotes and tags, so one cannot simply close the src with a quote and inject after that. However, an attacker can use javascript: or data: to abuse this.

Pulse Connect Secure 8.3R1 has Reflected XSS in adminservercacertdetails.cgi. In the admin panel, the certid parameter of adminservercacertdetails.cgi is reflected in the application's response and is not properly sanitized, allowing an attacker to inject tags. An attacker could come up with clever payloads to make the system run commands such as ping, ping6, traceroute, nslookup, arp, etc.

Ivanti Service Manager 2021.1 allows reflected XSS via the appName parameter associated with ConfigDB calls, such as in RelocateAttachments.aspx.

Cross-site scripting (XSS) vulnerability in the system configuration section in the administrative user interface in Pulse Connect Secure (PCS) 8.2 before 8.2r1, 8.1 before 8.1r2, 8.0 before 8.0r9, and 7.4 before 7.4r13.4 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors.

Reflected XSS in Ivanti Endpoint Manager before version 2024 SU1 or before version 2022 SU7 allows a remote unauthenticated attacker to execute arbitrary javascript in a victim's browser. Unlikely user interaction is required.

In Pulse Secure Pulse Connect Secure (PCS) 8.3.x before 8.3R7.1 and 9.0.x before 9.0R3, an XSS issue has been found on the Application Launcher page.

An XSS issue has been found in welcome.cgi in Pulse Secure Pulse Connect Secure (PCS) 8.1.x before 8.1R12, 8.2.x before 8.2R9, and 8.3.x before 8.3R3 due to one of the URL parameters not being sanitized properly.

Reflected XSS in Ivanti Connect Secure before version 22.7R2.6 and Ivanti Policy Secure before version 22.7R1.3 allows a remote unauthenticated attacker to obtain admin privileges. User interaction is required.

A cross site scripting (XSS) vulnerability exists in Pulse Connect Secure <9.1R5 on the PSAL Page.

In Pulse Secure Pulse Connect Secure version 9.0RX before 9.0R3.4 and 8.3RX before 8.3R7.1 and Pulse Policy Secure version 9.0RX before 9.0R3.2 and 5.4RX before 5.4R7.1, an unauthenticated, remote attacker can conduct a session hijacking attack.

A stored cross-site scripting (XSS) vulnerability in the web administration user interface of Pulse Secure Virtual Traffic Manager may allow a remote authenticated attacker to inject web script or HTML via a crafted website and steal sensitive data and credentials. Affected releases are Pulse Secure Virtual Traffic Manager 9.9 versions prior to 9.9r2 and 10.4r1.

A cross site scripting (XSS) vulnerability in Pulse Connect Secure <9.1R8 allowed attackers to exploit in the URL used for Citrix ICA.

An authenticated high privileged user can perform a stored XSS attack due to incorrect output encoding in Incapptic connect and affects all current versions.

A cross site scripting issue has been found in custompage.cgi in Pulse Secure Pulse Connect Secure (PCS) before 8.0R17.0, 8.1.x before 8.1R13, 8.2.x before 8.2R9, and 8.3.x before 8.3R3 and Pulse Policy Secure (PPS) before 5.2R10, 5.3.x before 5.3R9, and 5.4.x before 5.4R3 due to one of the URL parameters not being sanitized. Exploitation does require the user to be logged in as administrator; the issue is not applicable to the end user portal.

Ivanti Endpoint Manager through 2020.1.1 allows XSS via /LDMS/frm_splitfrm.aspx, /LDMS/licensecheck.aspx, /LDMS/frm_splitcollapse.aspx, /LDMS/alert_log.aspx, /LDMS/ServerList.aspx, /LDMS/frm_coremainfrm.aspx, /LDMS/frm_findfrm.aspx, /LDMS/frm_taskfrm.aspx, and /LDMS/query_browsecomp.aspx.

Cross-site scripting (XSS) vulnerability in the administrative user interface in Pulse Connect Secure (PCS) 8.2 before 8.2r1, 8.1 before 8.1r2, 8.0 before 8.0r9, and 7.4 before 7.4r13.4 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors.

Reflected XSS in Ivanti Endpoint Manager before version 2024 SU1 or before version 2022 SU7 allows a remote unauthenticated attacker to obtain admin privileges. User interaction is required.

A vulnerability in the authenticated user web interface of Pulse Connect Secure < 9.1R9 could allow attackers to conduct Cross-Site Scripting (XSS) through the CGI file.

Helpy v2.1.0 has Stored XSS via the Ticket title.

Cross-site scripting (XSS) vulnerability in Translation Management module 6.x before 6.x-1.21 for Drupal allows remote attackers to inject arbitrary web script or HTML via unspecified vectors.

A CWE-79: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability exists that could cause script execution when the request of a privileged account accessing the vulnerable web page is intercepted. Affected Products: 1-Phase Uninterruptible Power Supply (UPS) using NMC2 including Smart-UPS, Symmetra, and Galaxy 3500 with Network Management Card 2 (NMC2): AP9630/AP9630CH/AP9630J, AP9631/AP9631CH/AP9631J, AP9635/AP9635J (NMC2 AOS V6.9.8 and earlier), 3-Phase Uninterruptible Power Supply (UPS) using NMC2 including Symmetra PX 250/500 (SYPX) Network Management Card 2 (NMC2): AP9630/AP9630CH/AP9630J, AP9631/AP9631CH/AP9631J, AP9635/AP9635J (NMC2 AOS V6.9.6 and earlier), 3-Phase Uninterruptible Power Supply (UPS) using NMC2 including Symmetra PX 48/96/100/160 kW UPS (PX2), Symmetra PX 20/40 kW UPS (SY3P), Gutor (SXW, GVX), and Galaxy (GVMTS, GVMSA, GVXTS, GVXSA, G7K, GFC, G9KCHU): AP9630/AP9630CH/AP9630J, AP9631/AP9631CH/AP9631J, AP9635/AP9635CH (NMC2 AOS V6.9.6 and earlier), 1-Phase Uninterruptible Power Supply (UPS) using NMC3 including Smart-UPS, Symmetra, and Galaxy 3500 with Network Management Card 3 (NMC3): AP9640/AP9640J, AP9641/AP9641J, AP9643/AP9643J (NMC3 AOS V1.4.2.1 and earlier), APC Rack Power Distribution Units (PDU) using NMC2 2G Metered/Switched Rack PDUs with embedded NMC2: AP84XX, AP86XX, AP88XX, AP89XX (NMC2 AOS V6.9.6 and earlier), APC Rack Power Distribution Units (PDU) using NMC3 2G Metered/Switched Rack PDUs with embedded NMC3: APDU99xx (NMC3 AOS V1.4.0 and earlier), APC 3-Phase Power Distribution Products using NMC2 Galaxy RPP: GRPPIP2X84 (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 (NMC2) for InfraStruxure 150 kVA PDU with 84 Poles (X84P): PDPB150G6F (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 for InfraStruxure 40/60kVA PDU (XPDU) PD40G6FK1-M, PD40F6FK1-M, PD40L6FK1-M, PDRPPNX10 M,PD60G6FK1, PD60F6FK1, PD60L6FK1, PDRPPNX10, PD40E5EK20-M, PD40H5EK20-M (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 for Modular 150/175kVA PDU (XRDP): PDPM150G6F, PDPM150L6F, PDPM175G6H (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 for 400 and 500 kVA (PMM): PMM400-ALA, PMM400-ALAX, PMM400-CUB, PMM500-ALA, PMM500-ALAX, PMM500-CUB (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 for Modular PDU (XRDP2G): PDPM72F-5U, PDPM138H-5U, PDPM144F, PDPM138H-R, PDPM277H, PDPM288G6H (NMC2 AOS V6.9.6 and earlier), Rack Automatic Transfer Switches (ATS) Embedded NMC2: Rack Automatic Transfer Switches - AP44XX (ATS4G) (NMC2 AOS V6.9.6 and earlier), Network Management Card 2 (NMC2) Cooling Products: InRow Cooling for series ACRP5xx, ACRP1xx, ACRD5xx, and ACRC5xx SKUs (ACRP2G), InRow Cooling for series ACRC10x SKUs (RC10X2G), InRow Cooling for series ACRD6xx and ACRC6xx SKUs (ACRD2G), InRow Cooling Display for series ACRD3xx (ACRC2G), InRow Cooling for series ACSC1xx SKUs (SC2G), InRow Cooling for series ACRD1xx and ACRD2xx (ACRPTK2G), Ecoflair IAEC25/50 Air Economizer Display (EB2G), Uniflair SP UCF0481I, UCF0341I (UNFLRSP), Uniflair LE DX Perimeter Cooling Display for SKUs: IDAV, IDEV, IDWV, IUAV, IUEV, IUWV, IXAV, IXEV, IXWV, LDAV, LDEV, and LDWV (LEDX2G), Refrigerant Distribution Unit: ACDA9xx (RDU) (NMC2 AOS V6.9.6 and earlier), Environmental Monitoring Unit with embedded NMC2 (NB250): NetBotz NBRK0250 (NMC2 AOS V6.9.6 and earlier), and Network Management Card 2 (NMC2): AP9922 Battery Management System (BM4) (NMC2 AOS V6.9.6 and earlier)

Cross-site scripting (XSS) vulnerability in Cybozu Garoon 2.0.0 through 2.1.3 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different vulnerability than CVE-2008-6570.

The Booking Package plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the locale parameter in all versions up to, and including, 1.6.72 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.

Multiple cross-site scripting (XSS) vulnerabilities in include/html/header.php in TaskFreak! 0.6.4 allow remote attackers to inject arbitrary web script or HTML via the (1) sContext, (2) sort, (3) dir, and (4) show parameters in a save action to index.php; the (5) dir and (6) show parameters to print_list.php; and the (7) HTTP referer header to rss.php. NOTE: some of these details are obtained from third party information.

The WP on AWS plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via $_POST data in all versions up to, and including, 5.2.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.

The Custom Field Manager WordPress plugin through 1.0 does not sanitise and escape a parameter before outputting it back in the page, leading to a Reflected Cross-Site Scripting which could be used against high privilege users such as admin.

Multiple cross-site scripting (XSS) vulnerabilities in the Web UI in Xymon before 4.3.1 allow remote attackers to inject arbitrary web script or HTML via unspecified vectors.

Multiple cross-site scripting (XSS) vulnerabilities in Open Ticket Request System (OTRS) 2.4.x before 2.4.10 and 3.x before 3.0.7 allow remote attackers to inject arbitrary web script or HTML via unspecified vectors.

Cross-site scripting (XSS) vulnerability in mediawiki.page.image.pagination.js in MediaWiki 1.22.x before 1.22.9 and 1.23.x before 1.23.2 allows remote attackers to inject arbitrary web script or HTML via vectors involving the multipageimagenavbox class in conjunction with an action=raw value.

A vulnerability was found in OSM Lab show-me-the-way. It has been rated as problematic. This issue affects some unknown processing of the file js/site.js. The manipulation leads to cross site scripting. The attack may be initiated remotely. The patch is named 4bed3b34dcc01fe6661f39c0e5d2285b340f7cac. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-217439.

Cross-site scripting vulnerability in Kagemai 0.8.8 allows remote attackers to inject an arbitrary script via unspecified vectors.

Client-Side code injection through Feature Flag name in GitLab CE/EE starting with 11.9 allows a specially crafted feature flag name to PUT requests on behalf of other users via clicking on a link

PHPShop through 0.8.1 has XSS.

A vulnerability was found in PHPGurukul Maid Hiring Management System 1.0 and classified as problematic. Affected by this issue is some unknown functionality of the file /admin/search-booking-request.php. The manipulation of the argument searchdata leads to cross site scripting. The attack may be launched remotely.

Cross-site scripting (XSS) vulnerability on the HP Photosmart D110 and B110; Photosmart Plus B210; Photosmart Premium C310, Fax All-in-One, and C510; and ENVY 100 D410 printers allows remote attackers to inject arbitrary web script or HTML via unspecified vectors.

Virtualmin 6.03 allows XSS via the query string, as demonstrated by the webmin_search.cgi URI.

Cross-site scripting (XSS) vulnerability in the management login GUI page in Symantec LiveUpdate Administrator (LUA) before 2.3 allows remote attackers to inject arbitrary web script or HTML via the username field, as demonstrated by injecting an IFRAME element into the event log, a different vulnerability than CVE-2011-0545.

Cross-site scripting (XSS) vulnerability in IBM Maximo Asset Management and Asset Management Essentials 6.2, 7.1, and 7.5 allows remote attackers to inject arbitrary web script or HTML via the reportType parameter to an unspecified component.

In Support Incident Tracker (SiT!) 3.67, the Short Application Name and Application Name inputs in the config.php page are affected by XSS.

Organization Portal System developed by WellChoose has a Reflected Cross-site Scripting vulnerability, allowing unauthenticated remote attackers to execute arbitrary JavaScript codes in user's browser through phishing attacks.