NGINX Plus before versions R27 P1 and R26 P1 have a vulnerability in the module ngx_http_hls_module that might allow a local attacker to corrupt NGINX worker memory, resulting in its crash or potential other impact using a specially crafted audio or video file. The issue affects only NGINX Plus when the hls directive is used in the configuration file. Further, the attack is possible only if an attacker can trigger processing of a specially crafted audio or video file with the module ngx_http_hls_module.

NGINX Open Source before versions 1.23.2 and 1.22.1, NGINX Open Source Subscription before versions R2 P1 and R1 P1, and NGINX Plus before versions R27 P1 and R26 P1 have a vulnerability in the module ngx_http_mp4_module that might allow a local attacker to cause a worker process crash, or might result in worker process memory disclosure by using a specially crafted audio or video file. The issue affects only NGINX products that are built with the module ngx_http_mp4_module, when the mp4 directive is used in the configuration file. Further, the attack is possible only if an attacker can trigger processing of a specially crafted audio or video file with the module ngx_http_mp4_module.

On BIG-IP versions 16.1.x before 16.1.3.3, 15.1.x before 15.1.8.1, 14.1.x before 14.1.5.3, and all versions of 13.1.x, when a SIP profile is configured on a Message Routing type virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

An issue was discovered in GNU Binutils 2.32. It is a heap-based buffer overflow in process_mips_specific in readelf.c via a malformed MIPS option section.

An issue was discovered in the Binary File Descriptor (BFD) library (aka libbfd), as distributed in GNU Binutils 2.32. It is a heap-based buffer overflow in _bfd_archive_64_bit_slurp_armap in archive64.c.

A heap buffer overflow in the TFTP receiving code allows for DoS or arbitrary code execution in libcurl versions 7.19.4 through 7.64.1.

Heap-based buffer overflow in compression-pointer processing in core/ngx_resolver.c in nginx before 1.0.10 allows remote resolvers to cause a denial of service (daemon crash) or possibly have unspecified other impact via a long response.

When NGINX Plus or NGINX OSS are configured to use the HTTP/3 QUIC module, undisclosed HTTP/3 encoder instructions can cause NGINX worker processes to terminate or cause or other potential impact.

Nginx NJS v0.7.4 was discovered to contain a segmentation violation in njs_promise_reaction_job. NOTE: the vendor disputes the significance of this report because NJS does not operate on untrusted input.

NGINX Open Source before versions 1.23.2 and 1.22.1, NGINX Open Source Subscription before versions R2 P1 and R1 P1, and NGINX Plus before versions R27 P1 and R26 P1 have a vulnerability in the module ngx_http_mp4_module that might allow a local attacker to corrupt NGINX worker memory, resulting in its termination or potential other impact using a specially crafted audio or video file. The issue affects only NGINX products that are built with the ngx_http_mp4_module, when the mp4 directive is used in the configuration file. Further, the attack is possible only if an attacker can trigger processing of a specially crafted audio or video file with the module ngx_http_mp4_module.

When NGINX Plus or NGINX OSS are configured to use the HTTP/3 QUIC module, undisclosed HTTP/3 requests can cause NGINX worker processes to terminate or cause other potential impact. This attack requires that a request be specifically timed during the connection draining process, which the attacker has no visibility and limited influence over.

Buffer overflow in system firmware for EDK II may allow unauthenticated user to potentially enable escalation of privilege and/or denial of service via network access.

In bta_dm_sdp_result of bta_dm_act.cc, there is a possible out of bounds stack write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android-6.0 Android-6.0.1 Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android ID: A-74016921.

A memory corruption vulnerability exists in the Windows Server DHCP service when an attacker sends specially crafted packets to a DHCP failover server, aka 'Windows DHCP Server Remote Code Execution Vulnerability'.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client, aka 'Windows DHCP Client Remote Code Execution Vulnerability'. This CVE ID is unique from CVE-2019-0698, CVE-2019-0726.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client, aka 'Windows DHCP Client Remote Code Execution Vulnerability'. This CVE ID is unique from CVE-2019-0697, CVE-2019-0698.

In ixheaacd_adts_crc_start_reg of ixheaacd_adts_crc_check.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android-9. Android ID: A-113261928.

In bta_ag_parse_cmer of bta_ag_cmd.cc in Android-7.0, Android-7.1.1, Android-7.1.2, Android-8.0, Android-8.1 and Android-9, there is a possible out-of-bounds write due to a missing bounds check. This could lead to remote code execution in the bluetooth server with no additional execution privileges needed. User interaction is not needed for exploitation. Android ID: A-112860487.

Google V8, as used in Google Chrome before 15.0.874.121, allows remote attackers to cause a denial of service or possibly have unspecified other impact via unknown vectors that trigger an out-of-bounds write operation.

A memory corruption vulnerability exists in the Windows Server DHCP service when an attacker sends specially crafted packets to a DHCP server, aka 'Windows DHCP Server Remote Code Execution Vulnerability'.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client. An attacker who successfully exploited the vulnerability could run arbitrary code on the client machine. To exploit the vulnerability, an attacker could send specially crafted DHCP responses to a client. The security update addresses the vulnerability by correcting how Windows DHCP clients handle certain DHCP responses.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client, aka 'Windows DHCP Client Remote Code Execution Vulnerability'. This CVE ID is unique from CVE-2019-0697, CVE-2019-0726.

A memory corruption vulnerability exists in the Windows Server DHCP service when processing specially crafted packets, aka 'Windows DHCP Server Remote Code Execution Vulnerability'.

Google V8, as used in Google Chrome before 13.0.782.215, allows remote attackers to cause a denial of service or possibly have unspecified other impact via unknown vectors that trigger an out-of-bounds write.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Guard 2.1.3.0 (2021/12/06) and later

A heap-based buffer overflow vulnerability exists in the XML Decompression DecodeTreeBlock functionality of AT&T Labs Xmill 0.7. Within `DecodeTreeBlock` which is called during the decompression of an XMI file, a UINT32 is loaded from the file and used as trusted input as the length of a buffer. An attacker can provide a malicious file to trigger this vulnerability.

FreeRDP prior to version 2.0.0-rc4 contains a Heap-Based Buffer Overflow in function zgfx_decompress_segment() that results in a memory corruption and probably even a remote code execution.

In smp_br_state_machine_event of smp_br_main.cc, there is a possible out of bounds write due to memory corruption. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android Versions: Android-6.0 Android-6.0.1 Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android ID: A-80145946.

rdesktop versions up to and including v1.8.3 contain a Heap-Based Buffer Overflow in function process_plane() that results in a memory corruption and probably even a remote code execution.

rdesktop versions up to and including v1.8.3 contain a Heap-Based Buffer Overflow in function ui_clip_handle_data() that results in a memory corruption and probably even a remote code execution.

A memory corruption vulnerability exists in the Windows DHCP client when an attacker sends specially crafted DHCP responses to a client, aka "Windows DHCP Client Remote Code Execution Vulnerability." This affects Windows 10, Windows 10 Servers.

FreeRDP prior to version 2.0.0-rc4 contains an Out-Of-Bounds Write of up to 4 bytes in function nsc_rle_decode() that results in a memory corruption and possibly even a remote code execution.

Eaton 9000X DriveA versions 2.0.29 and prior has a stack-based buffer overflow vulnerability, which may allow remote code execution.

Stack-based buffer overflow in Asuswrt-Merlin firmware for ASUS devices older than 384.4 and ASUS firmware before 3.0.0.4.382.50470 for devices allows remote attackers to execute arbitrary code by providing a long string to the blocking.asp page via a GET or POST request. Vulnerable parameters are flag, mac, and cat_id.

A certain sequence of valid BGP or IPv6 BFD packets may trigger a stack based buffer overflow in the Junos OS Packet Forwarding Engine manager (FXPC) process on QFX5000 series, EX4300, EX4600 devices. This issue can result in a crash of the fxpc daemon or may potentially lead to remote code execution. Affected releases are Juniper Networks Junos OS on QFX 5000 series, EX4300, EX4600 are: 14.1X53; 15.1X53 versions prior to 15.1X53-D235; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R3; 17.3 versions prior to 17.3R3-S2, 17.3R4; 17.4 versions prior to 17.4R2-S1, 17.4R3; 18.1 versions prior to 18.1R3-S1, 18.1R4; 18.2 versions prior to 18.2R2; 18.2X75 versions prior to 18.2X75-D30; 18.3 versions prior to 18.3R2.

rdesktop versions up to and including v1.8.3 contain a Heap-Based Buffer Overflow in function cssp_read_tsrequest() that results in a memory corruption and probably even a remote code execution.

In Advantech WebAccess versions V8.2_20170817 and prior, WebAccess versions V8.3.0 and prior, WebAccess Dashboard versions V.2.0.15 and prior, WebAccess Scada Node versions prior to 8.3.1, and WebAccess/NMS 2.0.3 and prior, a heap-based buffer overflow vulnerability has been identified, which may allow an attacker to execute arbitrary code.

A Buffer Overflow issue was discovered in Kamailio before 4.4.7, 5.0.x before 5.0.6, and 5.1.x before 5.1.2. A specially crafted REGISTER message with a malformed branch or From tag triggers an off-by-one heap-based buffer overflow in the tmx_check_pretran function in modules/tmx/tmx_pretran.c.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 and later QTS 5.0.0: QVR Guard 2.1.3.0 and later

FreeRDP prior to version 2.0.0-rc4 contains a Heap-Based Buffer Overflow in function zgfx_decompress() that results in a memory corruption and probably even a remote code execution.

On Samsung mobile devices with M(6.0) and N(7.x) software, a heap overflow in the sensorhub binder service leads to code execution in a privileged process, aka SVE-2017-10991.

FreeRDP prior to version 2.0.0-rc4 contains an Integer Overflow that leads to a Heap-Based Buffer Overflow in function gdi_Bitmap_Decompress() and results in a memory corruption and probably even a remote code execution.

In Delta Electronics Automation TPEditor version 1.89 or prior, parsing a malformed program file may cause heap-based buffer overflow vulnerability, which may allow remote code execution.

FreeRDP prior to version 2.0.0-rc4 contains an Integer Truncation that leads to a Heap-Based Buffer Overflow in function update_read_bitmap_update() and results in a memory corruption and probably even a remote code execution.

A remote code execution vulnerability exists in Microsoft Exchange software when the software fails to properly handle objects in memory, aka "Microsoft Exchange Memory Corruption Vulnerability." This affects Microsoft Exchange Server. This CVE ID is unique from CVE-2018-8151.

A DNS client stack-based buffer overflow in ipdnsc_decode_name() affects Wind River VxWorks 6.5 through 7. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

rdesktop versions up to and including v1.8.3 contain an Integer Overflow that leads to an Out-Of-Bounds Write in function process_bitmap_updates() and results in a memory corruption and possibly even a remote code execution.

The uwsgi_expand_path function in core/utils.c in Unbit uWSGI through 2.0.15 has a stack-based buffer overflow via a large directory length.

A stack-based buffer overflow (Remote Code Execution) issue was discovered in Design Science MathType 6.9c. This occurs in a function call in which the first argument is a corrupted offset value and the second argument is a stack buffer. This is fixed in 6.9d.

All versions up to V1.1.10P3T18 of ZTE ZXHN F670 product are impacted by heap-based buffer overflow vulnerability, which may allow an attacker to execute arbitrary code.