D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function urlrd_opt.asp. This vulnerability allows attackers to execute arbitrary commands via the url_en parameter.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function httpd_debug.asp. This vulnerability allows attackers to execute arbitrary commands via the time parameter.

Remote Code Execution (RCE) vulnerability exists in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicious users can use this vulnerability to use "\ " or backticks to bypass the shell metacharacters in the ssid0 or ssid1 parameters to execute arbitrary commands.This vulnerability is due to the fact that CVE-2019-17509 is not fully patched and can be bypassed by using line breaks or backticks on its basis.

Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetWizardConfig.php in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicoius users can use this vulnerability to use "\ " or backticks in the shell metacharacters in the ssid0 or ssid1 parameters to cause arbitrary command execution. Since CVE-2019-17510 vulnerability has not been patched and improved www/hnap1/control/setwizardconfig.php, can also use line breaks and backquotes to bypass.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetWLanACLSettings. This vulnerability allows attackers to execute arbitrary commands via the wl(0).(0)_maclist parameter.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function wget_test.asp. This vulnerability allows attackers to execute arbitrary commands via the url parameter.

In the "webupg" binary of D-Link DIR-825 G1, attackers can bypass authentication through parameters "autoupgrade.asp", and perform functions such as downloading configuration files and updating firmware without authorization.

A vulnerability, which was classified as critical, has been found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. This issue affects some unknown processing of the file /goform/form2AddVrtsrv.cgi of the component Virtual Service Handler. The manipulation leads to improper access controls. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetStationSettings. This vulnerability allows attackers to execute arbitrary commands via the station_access_enable parameter.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function upgrade_filter. This vulnerability allows attackers to execute arbitrary commands via the path and time parameters.

A Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetNetworkTomographySettings.php of D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin because backticks can be used for command injection when judging whether it is a reasonable domain name.

D-Link device DIR_882 DIR_882_FW1.30B06_Hotfix_02 was discovered to contain a command injection vulnerability in the LocalIPAddress parameter. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetStaticRouteSettings. This vulnerability allows attackers to execute arbitrary commands via the staticroute_list parameter.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function proxy_client.asp. This vulnerability allows attackers to execute arbitrary commands via the proxy_srv, proxy_srvport, proxy_lanip, proxy_lanport parameters.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetWLanApcliSettings. This vulnerability allows attackers to execute arbitrary commands via the ApCliKeyStr parameter.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function version_upgrade.asp. This vulnerability allows attackers to execute arbitrary commands via the path parameter.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function usb_paswd.asp. This vulnerability allows attackers to execute arbitrary commands via the name parameter.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function ChgSambaUserSettings. This vulnerability allows attackers to execute arbitrary commands via the samba_name parameter.

The ping tool in multiple D-Link and TRENDnet devices allow remote attackers to execute arbitrary code via the ping_addr parameter to ping.ccp.

A vulnerability was found in D-Link DIR-823G 1.0.2B05_20181207. It has been rated as critical. This issue affects the function SetAutoRebootSettings/SetClientInfo/SetDMZSettings/SetFirewallSettings/SetParentsControlInfo/SetQoSSettings/SetVirtualServerSettings of the file /HNAP1/ of the component Web Management Interface. The manipulation leads to improper access controls. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. Affected is an unknown function of the file /goform/form2AdvanceSetup.cgi of the component WiFi Settings Handler. The manipulation leads to improper access controls. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

D-Link device D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetNetworkTomographySettings. This vulnerability allows attackers to execute arbitrary commands via the tomography_ping_address, tomography_ping_number, tomography_ping_size, tomography_ping_timeout, and tomography_ping_ttl parameters.

D-Link device DIR_882 DIR_882_FW1.30B06_Hotfix_02 was discovered to contain a command injection vulnerability in the twsystem function. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

D-Link device DIR_878_FW1.30B08_Hotfix_02 was discovered to contain a command injection vulnerability in the twsystem function. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

A vulnerability has been found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/form2Dhcpd.cgi of the component DHCPD Setting Handler. The manipulation leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. This vulnerability affects unknown code of the file /goform/DDNS of the component DDNS Service. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

D-Link devices DIR_878 DIR_878_FW1.30B08_Hotfix_02 and DIR_882 DIR_882_FW1.30B06_Hotfix_02 were discovered to contain a command injection vulnerability in the system function. This vulnerability allows attackers to execute arbitrary commands via a crafted HNAP1 POST request.

A weakness has been identified in D-Link DIR-806A 100CNb11. Affected is the function ssdpcgi_main of the component SSDP Request Handler. This manipulation causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-600 up to 2.15WWb02. Affected by this vulnerability is an unknown functionality of the file hedwig.cgi of the component HTTP Header Handler. The manipulation of the argument Cookie results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

D-Link DIR-645 1.03 A1 is vulnerable to Buffer Overflow. The hnap_main function in the cgibin handler uses sprintf to format the soapaction header onto the stack and has no limit on the size.

An Access Control vulnerability exists in D-Link DIR-823G REVA1 1.02B05 (Lastest) via any parameter in the HNAP1 function

A vulnerability has been found in D-Link DIR-816L 2_06_b09_beta. This affects the function genacgi_main of the file gena.cgi. The manipulation of the argument SERVER_ID/HTTP_SID leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

The D-Link DSL6740C modem has an Incorrect Use of Privileged APIs vulnerability, allowing unauthenticated remote attackers to modify any user’s password by leveraging the API, thereby granting access to Web, SSH, and Telnet services using that user’s account.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been rated as critical. Affected by this issue is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument group leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

The miniigd SOAP service in Realtek SDK allows remote attackers to execute arbitrary code via a crafted NewInternalClient request, as exploited in the wild through 2023.

The WAN configuration page "wan.htm" on D-Link DIR-615 devices with firmware 20.06 can be accessed directly without authentication which can lead to disclose the information about WAN settings and also leverage attacker to modify the data fields of page.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been rated as critical. Affected by this issue is the function dbsrv_asp of the file /dbsrv.asp. The manipulation of the argument str leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in D-Link DIR-816L 2_06_b09_beta. Affected by this vulnerability is the function authenticationcgi_main of the file /authentication.cgi. Performing manipulation of the argument Password results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-816 A2 1.10CNB04 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/setDeviceSettings of the component Web Interface. The manipulation of the argument statuscheckpppoeuser leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252139.

A vulnerability was identified in D-Link DIR-852 1.00. This issue affects some unknown processing of the file /gena.cgi. Such manipulation of the argument service leads to command injection. The attack can be executed remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

A security issue exists in D-Link D-View 8 v2.0.2.89 and prior that could allow an attacker to manipulate the probe inventory of the D-View service. This could result in the disclosure of information from other probes, denial of service conditions due to the probe inventory becoming full, or the execution of tasks on other probes.

A vulnerability was determined in D-Link DIR-816L 2_06_b09_beta. This issue affects the function soapcgi_main of the file /soap.cgi. This manipulation causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.

A weakness has been identified in D-Link DWR-M920, DWR-M921, DWR-M960, DIR-822K and DIR-825M 1.01.07. This issue affects some unknown processing of the file /boafrm/formTracerouteDiagnosticRun. Executing manipulation of the argument host can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be exploited.

A vulnerability has been found in D-Link DAR-7000 up to 20231126 and classified as critical. This vulnerability affects unknown code of the file /user/inc/workidajax.php. The manipulation of the argument id leads to sql injection. The exploit has been disclosed to the public and may be used. VDB-247162 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

OS Command Injection vulnerability in debug_fcgi of D-Link DWR-932C E1 firmware allows a remote attacker to perform command injection via a crafted HTTP request.

Missing Authentication for Critical Function vulnerability in debug_post_set.cgi of D-Link DWR-932C E1 firmware allows an unauthenticated attacker to execute administrative actions.

A vulnerability has been found in D-Link DI-7001 MINI 19.09.19A1/24.04.18B1. The affected element is an unknown function of the file /msp_info.htm. Such manipulation of the argument cmd leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A security vulnerability has been detected in D-Link DAP-2695 2.00RC13. The impacted element is the function sub_4174B0 of the component Firmware Update Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DVX-2000MS contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file. As weak passwords have been used, the plaintext passwords can be recovered from the hash values.